P08-020SLC-A-G

3M™ Pak 8 Socket Connector 0.8 mm, Vertical, Surfacemount, 3 mm Stack Height P08 Series • • • • 0.8 mm pitch connector system 3 mm mated stack height Surface mount design Locking mechanism with audible click when fully mated • Tape and reel with suction covers available for automated assembly placement • RoHS Compliant. See the Regulatory Information Appendix (RIA) in the “RoHS compliance” section of www.3Mconnectors.com for compliance information (RIA E1 & C1 apply) Date Modified: February 21, 2017 TS-1150-G Sheet 1 of 2 Physical Insulation Material: Flammability: Color: Contact: Material: Plating: Underplating: Wiping Area: Solder Tails: Mating Compatibility: High Temp Thermo Plastic UL 94V‑0 Natural Copper Alloy 50 µ” [1.25 µm] Nickel 8 µ” [ 0.20 µm ] Gold Gold Flash P08 Series Plugs. TS-1096 Electrical Current Rating: 0.5 A Voltage Rating: 60 VAC/DC 3 Insulation Resistance: 10 MW min. at 500 VDC Withstanding Voltage: 250 VAC for 1 minute Environmental Temperature Rating: -55˚C to +85˚C Process Rating: 245˚C (profile per J-STD-020) Moisture Sensitivity Level: MSL 1 (per J-STD-020) Electronics Materials Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Pak 8 Socket Connector 0.8 mm, Vertical, Surfacemount, 3 mm Stack Height P08 Series 5.88 0.40+0.2 –0.1 4.93 0 1. C G 1.95±0.1 0.98 Terminal coplanarity F A B±0.15 0.80±0.1 0.80±0.1 0.35±0.1 Dimensions 0.8±0.05 dia. C±0.1 No. of Contacts A B C D E F 20 10.6 7.2 9.5 9.5 7.2 0.1 40 18.6 15.2 17.5 17.5 15.2 0.1 80 35.4 31.2 33.5 33.5 31.2 0.15 Recommended PC board pattern (TOP VIEW) E ± 0.05 MIN 6.38 1.95 ± 0.1 3.32 ± 0.1 0.80 ± 0.05 0.80 ± 0.05 0.50 ± 0.05 D ± 0.05 2-dia.hole 0.9 Stacking Matrix Stack Height When Mated To: Skt Type Dim G A Plug A 2.2 3 mm (inch) Tolerance Unless Noted +0.1 0 mm .0 ±.3 .00 ±.3 .000 ( ) Dimensions used for Reference Only Ordering Information P08 ‑ XXX ‑ SLXX ‑ A ‑ G (RIA E1 & C1 apply) Height Options: A = 2.2 mm Height Contact Quantity See Table Packaging: T = Tape & Reel (opt) Blank = Tube Pack Electronics Materials Solutions Division Interconnect Solutions http://www.3Mconnectors.com Vacuum Pickup: C = Adhesive Suction Cover M = Molded suction cover (preferred for RoHS processes Blank = None (M options require Tape and Reel Packaging) TS‑1150-G Sheet 2 of 2 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory: For regulatory information about this product, contact your 3M representative. Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use: Many factors beyond 3M’s control and uniquely within user’s control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application. Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OR TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. 3M Electronics Materials Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3Mconnectors.com 3M is a trademark of 3M Company. Please recycle. Printed in USA. © 3M 2017. All rights reserved. RIA-2217B-E