PK10-030P-R-DA

3M™ Pak 10 Plug 1 mm Straight and Right Angle, Surface Mount PK10 Series • • • • 1 mm pitch connector system Stacked, Horizontal or Vertical Mating Low profile 5 mm mated height Surface mount retention clips reduce stress on surface mount leads • Keyed design helps prevent mating misalignment • Hard Tray and Vacuum pickup for automated assembly placement • See Regulatory Information Appendix (RIA) for chemical compliance information Date Modified: January 25, 2008  TS-1078-C Sheet 1 of 4 Physical Insulation: Material: Glass Filled LCP Flammability: UL 94V-0 Color: White Materials: Contact: Copper Alloy Retention Clips: Copper Alloy Contact Plating: Underplating: 120 μ” [ 3.0 μm ] Nickel Wiping Area: 2 μ” [ 0.05 μm ] min. Gold Solder Tails: Gold Flash Retention Clip Plating: Gold Flash over 120 μ” [ 3.0 μm ] Nickel Marking: Orientation Triangle Electrical Current Rating: Contact Resistance: Insulation Resistance: Dielectric withstanding Voltage: 0.5 A 50 mΩ max 1 × 103 MΩ min at 500 VDC 315 VAC for 1 minute Environmental Temperature Rating: -55°C to +85°C Process Rating: 260°C per J-STD-020C 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Pak 10 Plug 1 mm Straight and Right Angle, Surface Mount PK10 Series Straight Surface Mount Contact Quantity 30 50 80 100 120 A B C D 26.50 26.10 17.00 14.00 [1.043] [1.028] [0.669] [0.551] 36.50 36.10 27.00 24.00 [1.437] [1.421] [1.063] [0.945] 51.50 51.10 42.00 39.00 [2.028] [2.012] [1.654] [1.535] 61.50 61.10 52.00 49.00 [2.421] [2.406] [2.047] [1.929] 71.50 71.10 62.00 59.50 [2.815] [2.799] [2.441] [2.323] Automated Assembly: • Packaged in Hard Trays • Allows chucking type pick and place • Molded vacuum suction cover is optional Ordering Information PK10 - XXXPX - X - DA Contact Quantity See Table 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ (RIA E1 & C1 apply) Solder Tail Options: S = Vertical R = Right Angle Vacuum Suction Cover: Blank = None M = Molded Suction Cover Note: M only available for Solder Tail Option S TS-1078-C Sheet  of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Pak 10 Plug 1 mm Straight and Right Angle, Surface Mount PK10 Series Right Angle Surface Mount mm [inch] Contact Quantity A B C D E 30 26.50 26.10 17.00 14.50 14.00 [1.043] [1.028] [0.669] [0.571] [0.551] 36.50 36.10 27.00 24.50 24.00 [1.437] [1.421] [1.063] [0.965] [0.945] 51.50 51.10 42.00 39.50 39.00 [2.028] [2.012] [1.654] [1.555] [1.535] 61.50 61.10 52.00 49.50 49.00 [2.421] [2.406] [2.047] [1.949] [1.929] 50 80 100 120 71.5 71.1 62.0 59.5 59.0 [2.815] [2.799] [2.441] [2.343] [2.323] Pick and place vacuum surface Automated Assembly: • Packaged in Hard Trays • Flat surface allows vacuum pick and place TS-1078-C Sheet  of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Pak 10 Plug 1 mm Straight and Right Angle, Surface Mount PK10 Series Unit: mm [inch] PK10-XXXP-R-DA Mating Variations Horizontal Mating 5(0.197) PK10-XXXP-R-DA 7.8(0.307) 4.8(0.189) PK10-XXXS-R-DA PK10-XXXPX-S-DA 9.6(0.378) 5.9(0.232) Stacked Mating 2.9(0.114) Vertical Mating PK10-XXXSX-S-DA PK10-XXXS-R-DA 14.1(0.555) 7.8(0.307) 9.5(0.374) PK10-XXXSX-S-DA 2.8(0.110) 7.8(0.307) 6(0.236) 0.7(0.028) 6.9(0.272) PK10-XXXPX-S-DA TS-1078-C Sheet  of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E3: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/717/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. RIA-2217B-D Appendix E5: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. CHINA Appendix C1: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix C2: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. RIA-2217B-D Appendix C3: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3m.com/interconnects Please recycle. Printed in USA. © 3M 2008. All rights reserved. RIA-2217B-D 3M is a trademark of 3M Company.