PK10-100S-R-DA

3M™ Pak 10 Socket 1 mm Straight and Right Angle, Surface Mount PK10 Series • • • • • • • • 1 mm pitch connector system Stacked, Horizontal or Vertical Mating Low profile 5 mm mated height Surface mount retention clips reduce stress on surface mount leads Keyed design helps prevent mating misalignment Hard Tray and Vacuum pickup for automated assembly placement RoHS Compliant. See the Regulatory Information Appendix (RIA) in the “RoHS Compliance” section of www.3Mconnector.com for compliance information (RIA E1 and C1 apply) Date Modified: December 11, 2017  TS-1077-F Sheet 1 of 4 Physical Insulation: Material: Glass Filled LCP Flammability: UL 94V-0 Color: White Materials: Contact: Copper Alloy Retention Clips: Copper Alloy Contact Plating: Underplating: 120 μ” [ 3.0 μm ] Nickel Wiping Area: 2 μ” [ 0.05 μm ] min. Gold Solder Tails: Gold Flash Retention Clip Plating: Gold Flash over 120 μ” [ 3.0 μm ] Nickel Marking: Orientation Triangle Electrical Current Rating: Contact Resistance: Insulation Resistance: Dielectric withstanding Voltage: 0.5 A 50 mΩ max 1 × 103 MΩ min at 500 VDC 315 VAC for 1 minute Environmental Temperature Rating: -55°C to +85°C Process Rating: 260°C per J-STD-020C Electronics Materials Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Pak 10 Socket 1 mm Straight and Right Angle, Surface Mount PK10 Series Straight Surface Mount Contact Quantity 30 50 80 100 A B C D 26.50 26.10 17.00 14.00 [1.043] [1.028] [0.669] [0.551] 36.50 36.10 27.00 24.00 [1.437] [1.421] [1.063] [0.945] 51.50 51.10 42.00 39.00 [2.028] [2.012] [1.654] [1.535] 61.50 61.10 52.00 49.00 [2.421] [2.406] [2.047] [1.929] mm [inch] Automated Assembly: • Packaged in Hard Trays • Allows chucking type pick and place • Molded vacuum suction cover is optional Tolerance Unless Noted mm .0 .00 ±.1 ±.10 [ ] Dimensions for Reference Only Ordering Information PK10 - XXXSX - X - DA Contact Quantity See Table Electronics Materials Solutions Division Interconnect Solutions http://www.3Mconnector.com (RIA E1 & C1 apply) Solder Tail Options: S = Vertical R = Right Angle Vacuum Suction Cover: Blank = None M = Molded Suction Cover Note: M only available for Solder Tail Option S TS-1077-F Sheet 2 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Pak 10 Socket 1 mm Straight and Right Angle, Surface Mount PK10 Series Right Angle Surface Mount mm [inch] Contact Quantity 30 50 80 100 120 A B C D E 26.50 26.10 18.00 14.50 14.00 [1.043] [1.028] [0.709] [0.571] [0.551] 36.50 36.10 28.00 24.50 24.00 [1.437] [1.421] [1.102] [0.965] [0.945] 51.50 51.10 43.00 39.50 39.00 [2.028] [2.012] [1.693] [1.555] [1.535] 61.50 61.10 53.00 49.50 49.00 [2.421] [2.406] [2.087] [1.949] [1.929] 71.5 71.1 63.0 59.50 59.0 [2.815] [2.799] [2.480] [2.343] [2.323] Pick and place vacuum surface Contact designation Automated Assembly: • Packaged in Hard Trays • Flat surface allows vacuum pick and place TS-1077-F Sheet 3 of 4 Electronics Materials Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Pak 10 Socket 1 mm Straight and Right Angle, Surface Mount PK10 Series Unit: mm [inch] PK10-XXXP-R-DA Mating Variations Horizontal Mating 5 (0.197) PK10-XXXP-R-DA 4.8 (0.189) PK10-XXXS-R-DA PK10-XXXPX-S-DA 7.8 (0.307 ) 9.6 (0.378 ) 5.9 (0.232 ) Stacked Mating 2.9 (0.114 ) Vertical Mating PK10-XXXSX-S-DA PK10-XXXS-R-DA 7.8 (0.307 ) 9.5 (0.374 ) PK10-XXXSX-S-DA 6.9 (0.272) 14.1 (0.555) 2.8 (0.110 ) 7.8 (0.307) 6 (0.236 ) 0.7 (0.028) PK10-XXXPX-S-DA TS-1077-F Sheet 4 of 4 Electronics Materials Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory: For regulatory information about this product, contact your 3M representative. Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use: Many factors beyond 3M’s control and uniquely within user’s control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application. Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OR TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. 3M Electronics Materials Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3Mconnectors.com 3M is a trademark of 3M Company. Please recycle. Printed in USA. © 3M 2017. All rights reserved. RIA-2217B-E