SMS700BK1,220MM

3M™ Heat Shrink Tubing SMS Adhesive-Lined, 4:1, Semi-Rigid, Polyolefin for the Automotive Industry Data Sheet July 2019 Description 3M™ Heat Shrink Tubing SMS is a co-extruded, dual wall product. It is a composite of a polyolefin shrinkable outer wall and a thermoplastic adhesive inner wall. 3M SMS tubing is resistant to sever vibration, certain temperature changes, and automotive fluids that are seen in the automotive and marine environments. Features All-Weather, Heat-Shrinkable, Dual Wall, Polyolefin Tubing for Automotive Wire Harnesses Applications • • Semi-rigid polyolefin Provides excellent strain relief • Functional over wide temperature range • Puncture resistant • Resistant to salt water, automotive fluids and corrosive chemicals • Fire retardant • For RoHS and REACH information, please visit www.3M.com/regs Semi-rigid 3M SMS tubing is ideal for applications requiring moisture sealing, mechanical protection and strain relief. The adhesive layer is compatible with typical wire insulation and is intended for moisture sealing and insulation of automotive, RV, truck, trailer, tractor, heavy equipment and marine wire splices, in-line components, fusible links and terminals. Shrink Ratio 3M SMS tubing has a 4:1 shrink ratio. When fully recovered, the tubing will shrink 25% of its original diameter. The recovered wall thickness of the tubing is proportional to the degree of recovery. The operating temperature range is -55ºC (-67 ºF) to 110ºC (230 ºF), with a minimum shrink temperature of 121ºC (250 ºF). Standard Sizes and Dimensions Ordering Size .220 .300 .350 .450 .700 Minimum Expanded I.D. .220” .300” .350” .450” .700” Maximum Recovered I.D. .045” .060” .080” .105” .175” 1 of 3 Nominal Recovered Melt Wall .030” .033” .038” .043” .060” Meltable Recovered Outer Wall .027” .028” .033” .053” .053” Color Code Yellow White Green Red Orange  3M™ Heat Shrink Tubing SMS Typical Properties Not for specifications. Values are typical, not to be considered minimum or maximum. Properties measured at room temperature 73°F (23°C) unless otherwise stated. Applicable Specification: ESB-M99D56-FORD, MS-DB56-CHRYSLER Physical Property (Test Method) Typical Value US units (metric) Color Black, and other colorcoded sizes Tensile Strength 1900 PSI Ultimate Elongation (ASTM-D2671) 350% Longitudinal Change (ASTM-D2671) +0, -10% Secant Modulus (2%) (ASTM-D882 Procedure A) 35,000 PSI Heat Aging 135ºC (Adhesive Softens) Specific Gravity (ASTM-D792) (outer wall) 1.25 Flammability (ASTM-D2671 Procedure B) Self Extinguishing Thermal Cycle 5ºC to 135ºC Vibration 24 hours Cold Flex -30ºC Electrical Property (Test Method Typical Value US units (metric) Dielectric Strength (ASTM-D149) (outer wall) 500 V/mil Dielectric Withstand 1000 Volts AC Current Leakage