TMW.183X1.5-RED-BULK

3M™ Tubing TMW Adhesive Lined, Translucent, Semi-Rigid Polyolefin Data Sheet Description January 2019 3MTMW tubing is a semi-rigid, translucent heat-shrinkable polyolefin tubing that is coextruded and selectively cross-linked with an integral, meltable inner wall. When heated in excess of 135ºC (275ºF), the adhesive inner wall of the tubing is softened and forced by the shrinking action of the outer wall into contact with all underlying surfaces and small voids. The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. Upon cooling, 3M TMW tubing helps provide a tough, protective and insulating barrier, highly resistant to penetration by moisture, chemicals and solvents. 3M TMW tubing is rated for continuous operation at temperatures from -55ºC (-67ºF) to 110ºC (230ºF) and will withstand higher operating temperatures for brief periods. Adhesive reflow will occur at temperatures above 80°C (176°F). Regulatory Information Typical Applications For RoHS and REACH information, please visit www.3M.com/regs The primary application for 3M TMW tubing is in the manufacture of heat shrink butt connectors, disconnects, ring terminals and fork terminals. Other applications include braided-shield pigtails, mechanical assemblies, electronic components, electrical wire splices, breakouts, solder joints, delicate wire terminations and end-sealing of electrical cables. 3M TMW tubing can withstand the crimping force of standard crimp tools without puncture or splitting during heat recovery. The tubing remains round when cut, making it ideal for use in high speed processing and assembly equipment. Standard Colors Standard Packaging Ordering Information 3M TMW tubing is available color coded by diameter. Please see chart below. 3M TMW tubing is supplied in cut pieces. Standard lengths are available in 10,000 piece cartons, other lengths and diameters are available subject to factory quotation. Order 3M TMW tubing in the size equivalent to the expanded inside diameter required. Always order the largest size that will shrink snugly over the component to be covered. Nonstandard diameters and cut lengths are available subject to factory quotation. Example: TMW Red 183-1.50 Please contact your local distributor; available from 3M.com/oem [Where to Buy] or call 1-800-676-8381. 1 of 3  3M™ Tubing TMW Standard Sizes and Dimensions (without adhesive) 3M Product Number Expanded I.D. (Min.) In. (mm) Recovered I.D. (Max.) In. (mm) Total Recovered Wall Thickness (Nominal) In. (mm) Meltable Recovered Wall (Nominal) In. (mm) Standard Cut Length In. (mm) Cut Length Tolerance (+/-) In. (mm) TMW Red 183-0.750 .183 (4,65) .060 (1,52) .049 (1,24) .018 (0,46) .750 (19,05) .020 (0,51) TMW Red 183-1.500 .183 (4,65) .060 (1,52) .049 (1,24) .018 (0,46) 1.500 (38,10) .030 (0,76) TMW Blue 220-0.750 .220 (5,59) .070 (1,78) .049 (1,24) .018 (0,46) .750 (19,05) .020 (0,51) TMW Blue 220-1.500 .220 (5,59) .070 (1,78) .049 (1,24) .018 (0,46) 1.500 (38,10) .030 (0,76) TMW Yellow 255-0.875 .255 (6,47) .095 (2,41) .059 (1,50) .018 (0,46) .875 (22,22) .020 (0,51) TMW Yellow 255-1.700 .255 (6,47) .095 (2,41) .059 (1,50) .018 (0,46) 1.700 (43,18) .030 (0,76) TMW Pink 330-1.000 .330 (8,38) .165 (4,19) .059 (1,50) .018 (0,46) 1.000 (25,40) .020 (0,51) TMW Pink 330-1.850 .330 (8,38) .165 (4,19) .059 (1,50) .018 (0,46) 1.850 (46,99) .030 (0,76) Typical Properties Technical information provided consists of typical product data and should not be used for specification purposes. Unless otherwise noted, all tests are performed at room temperature. Application Specifications: UL Recognized, File E-157227 and CSA Certified, CSA LR38227 Physical Property Typical Value Tensile Strength 2500 PSI Ultimate Elongation 400% 2% Secant Modulus 32,000 PSI Longitudinal Change +1, -10% Specific Gravity 1.0 Heat Aging * 168 hrs. @ 175ºC Elongation 175% Heat Shock * (4 hrs. @ 250ºC) No dripping, cracking, flowing Low Temperature Flexibility * (4 hrs. @ -55ºC) No cracking * Outer wall only Electrical Property Typical Value Dielectric Strength 900 V/mil Volume Resistivity 1014 ohm-cm 2 of 3 3M™ Tubing TMW Typical Properties (Cont.) Shelf Life & Storage Chemical Property Typical Value Corrosive Effect Non-corrosive Solvent Resistance Tensile Strength Dielectric Strength 1000 PSI 400 V/mil Water Absorption 0.1% Fungus Resistance Non-nutrient Fluid Resistance Gasoline Hydraulic Fluid @ JP4 Skydrol 600 >600 PSI 600 V/mil 3MTMW Tubing has a 10-year shelf life from date of manufacture when stored in a humidity controlled storage (10°C/50°F to 27°C/80°F and