UCT-50

Ultra Clear Double Coated Tape UCT-50 Technical Data October 2016 Product Description 3M™ Ultra Clear Double Coated Tape UCT-50 is a double sided tape, produced in a clean room, with a thin polyester (PET) film carrier for dimensional stability and improved handling. The high tack adhesive provides high initial adhesion and good shear holding power to a variety of surfaces. Product Construction Typical Physical Properties Adhesive Carrier Adhesive Color Release Liners Clear PET Film Acrylic Clear Polyester (PET) Roll Size 47.2 in x 109 yd (1200 mm x 100m) Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. ASTM Test Method Adhesion to Steel: (72 hr. @ RT) 71.8 oz./1” (20.3 N/25 mm) D-3330, (90° Peel) Static Shear: (72 hr. @ RT, 1000g Wt.) 10,000 minutes D-3654 Total Tape Thickness: (w/out liners) 1.95 mils (0.050 mm) D-3652 Faceside Adhesive Thickness: 0.74 mils (0.019 mm) D-3652 Backside Adhesive Thickness: 0.74 mils (0.019 mm) D-3652 Faceside Liner Thickness: 1.45 mils (0.037 mm) D-3652 Backside Liner Thickness: Color: (Ultra Scan Pro on LCD Glass) 3.05 mils (0.078mm) L* = 96.45 a* = -0.05 b* = 0.49 1.10% D-3652 E-308, (D65/10°) 90.3% E-308, (D65/10°) Haze: Uncorrected Light Transmission @450 nm: (on LCD glass) D-1003-92, (D65/10°) Note: Faceside adhesive is the adhesive that is exposed when the easy side liner is removed. Backside adhesive is the adhesive exposed when the tight side liner is removed. Features • Non-silicone acrylic adhesive—leaves no silicone residue • Good tack and instantaneous adhesion • PET film carrier provides dimensional stability, making it easy to process and die cut Application Ideas • General use for applications in the electronics and appliance industry in need of excellent initial tack, good adhesion and ease of die cut • Cellular phone lens attachment • Tablet lens attachment 1 3M™ Ultra Clear Double Coated Tape UCT-50 Additional Information • Splice-free maximum roll length is 100 meters -0/+2 meters • Product provided on plastic cores and individually packed. Core ID = 76.7 mm ± 0.1 mm • Substrate should be smooth, clean, dry and oil-free to ensure good wet-out and adequate adhesion. • Tape may not bond or conform to rough or sharply curved surfaces. • Adhesion and holding power are reduced at elevated temperatures. Storage Store under normal conditions of 60ºF to 80ºF (16º to 27ºC) and 40% to 60% R.H. in the original carton. Shelf Life To obtain best performance, use this product within 18 months from date of manufacture. Technical Information The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application. Warranty, Limited Remedy, and Disclaimer Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application User is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application. Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. where prohibited by law, 3M will not be liable for any loss or damage arising from Limitation of Liability Except the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. O ISO 9001ISO 9001 ISO 9001 This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards. Industrial Adhesives and Tapes Division 3M Center, Building 225-3S-06 St. Paul, MN 55144-1000 800-362-3550 877-369-2923 (Fax) www.3M.com/converter 3M is a trademark of 3M Company. ©3M 2016 E70-0713-4637-6 October 2016 2