VTN-200-11/2-BLACK

3M™ Heat Shrink Tubing VTN-200 Modified Fluoroelastomer Data Sheet September 2019 Product Description 3M™ Heat Shrink Tubing VTN-200 is highly abrasion and cut-through resistant and can withstand a wide variety of fuels, lubricants, acids and highly corrosive fluids at temperatures up to 200°C. In addition to its high continuous operating temperature and chemical-resistance properties, this tubing is very flexible and is easily marked by hot-stamp or printwheel methods. When heated in excess of 175°C (347°F), 3M VTN-200 tubing rapidly shrinks to a skintight fit. 3M VTN-200 tubing is rated for continuous operation from –55°C (–67°F) to 200°C (392°F). Regulatory Information For RoHS and REACH information, please visit www.3M.com/regs Typical Applications Because of its excellent high temperature fluid performance, 3M VTN-200 tubing is often used to protect wiring and component covers in aircraft/aerospace applications including electronic control systems and hydraulic fluid transport mechanisms and in chemical plants. Shrink Ratio 3M VTN-200 tubing has a 2:1 shrink ratio. When freely recovered, the tubing will shrink to 50% of its as-supplied internal diameter. The recovered wall thickness is proportional to the degree of recovery. Standard Color Black Availability Standard Packaging Spools Order 3M Heat Shrink Tubing VTN-200 by product name, size equivalent to the expanded inside diameter, package type and color. Always order the largest size that will shrink snugly over the component to be covered. Example: VTN-200, 3/16", black, spools. Please contact your local distributor; available from 3M.com/oem [Where to Buy] or call 1-800-676-8381. 1 of 3 3M™ Heat Shrink Tubing VTN-200 Standard Sizes and Dimensions Expanded I.D. (Minimum) In. (mm) Recovered I.D. (Maximum) In. (mm) 1/8 3/16 .125 .187 (3,18) (4,75) .062 .093 (1,57) (2,36) 1/4 .250 (6,35) .125 (3,18) Ordering Size 3/8 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 2 Typical Properties .375 .500 .625 .750 .875 1.000 1.250 1.500 2.000 (9,53) (12,70) (15,88) (19,05) (22,23) (25,40) (31,75) (38,10) (50,80) Recovered Wall Thickness (Nominal) In. (mm) .030 (0,76) .035 (0,89) .187 (4,75) .250 (6,35) .312 (7,92) .375 (9,53) .438 (11,11) .500 (12,70) .625 (15,88) .750 (19,05) 1.000 (25,40) .035 (0,89) .035 .035 (0,89) (0,89) .042 0 (1,07) .042 (1,07) .049 (1,24) .049 (1,24) .055 (1,40) .055 (1,40) .065 (1,65) Technical information provided consists of typical product data and should not be used for specification purposes. Unless otherwise noted, all tests are performed at room temperature. Application Specifications: AS23053/13* *Formerly MIL-I-23053/13, MIL-DTL-23053/13 and SAE-AMS-DTL-23053/13 Tensile Strength Ultimate Elongation Longitudinal Change Specific Gravity Typical Value US units (metric) 2400 PSI 450% +1, -10% 1.7 Operating Temperature Range -55ºC to +200ºC Shrink Temperature (Min.) Low Temperature Flexibility 4 hrs @ -55ºC 175ºC (347ºF) Flammability Self-extinguish Physical Property Electrical Property Dielectric Strength Volume Resistivity Chemical Property Corrosion Resistance Fuel & Oil Resistance Solvent Resistance Abrasion Resistance Acids & Alkalis Resistance 2 of 3 No cracking Typical Value US units (metric) 500 V/mil 1012 ohm/cm Typical Value US units (metric) Non-corrosive Excellent Excellent Excellent Excellent 3M™ Heat Shrink Tubing VTN-200 Shelf Life & Storage 3M™ Heat Shrink Tubing VTN-200 has a 5-year shelf life from date of manufacture when stored in a humidity controlled storage (10°C/50°F to 27°C/80°F and