67-21SURC

A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Top View LEDs Part Number: 67-21SURC Package outlines & Re-flow Profile Reflow Temp/Time Soldering iron Basic spec is 5sec when 260℃. If temperature is higher, time should be shorter (+10℃ -1sec ).Power dissipation of iron should be smaller than 15W, and temperatures should be controllable .Surface temperature of the device should be under 230℃ . ITEM Resin (mold) Lens color Printed circuit board For Reflow Soldering Material Emitted color MATERIALS Epoxy Water Clear BT AlGaInP Hyper Red NOTES: 1. All dimensions are in millimeters (inches). 2. Tolerances are ±0.1mm (0.004inch) unless otherwise noted. 3. Polarity referring onto the cathode mark is reversed on the red. 2006/10/11 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-21SURC ELECTRO-OPTICAL CHARACTERISTICS Parameter (TA=25℃) Unit Value Test Symbol Condition MIN. TYP. MAX. IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA VR=5V 2θ1/2 VF IV λp λd △λ IR ESD − 120 2.0 2.4 − − − − Viewing angle at 50% IV Forward voltage Luminous intensity Peak Wavelength Dominant Wavelength Spectral Line Half-Width Reverse current Electrostatic Discharge Deg V mcd nm nm nm µA mA 200 300 − − − 630 625 20 10 2000 Absolute maximum ratings Parameter Forward current Symbol IF IFP PD VR Top Tstg Value 25 60 60 5 (TA=25℃) Unit mA mA mW V ℃ ℃ Peak pulsing current (1/10 duty f=1kHz) Power Dissipation Reverse voltage Operating temperature range Storage temperature range -40 ~+85 -40 ~+100 2006/10/11 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-21SURC Test items and results of reliability NO 1 Item Reflow Test Conditions TEMP：240±5℃ Min. 5sec. H：+100℃ 15min ∫ 5min L：-40℃ 15min H：+100℃ 5min ∫ 10set L：-10℃ 5min TEMP：100℃ Test Sample Size Ac/Re Hours/Cycle 6 MIN. 22 PCS 0/1 2 Temperature Cycle 300 CYCLES 22 PCS 0/1 3 Thermal Shock 300 CYCLES 22 PCS 0/1 4 High Temperature Storage Low Temperature Storage 1000 HRS 22 PCS 0/1 5 TEMP：-55℃ 1000 HRS 22 PCS 0/1 6 DC Operating Life High Temperature / High Humidity IF=20mA 1000 HRS 22 PCS 0/1 7 85℃ / 85%RH 1000 HRS 22 PCS 0/1 ＊Refer to reliability test standard specification for in this line. 2006/10/11 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-21SURC Typical Electro-Optical Characteristics 2006/10/11 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-21SURC Typical Electro-Optical Characteristics 2006/10/11