67-21UWC_09

A-BRIGHT TOP View LEDs A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-21UWC Package outlines & Re-flow Profile Reflow Temp/Time Soldering iron Basic spec is 5sec when 260℃. If temperature is higher, time should be shorter (+10℃ -1sec ).Power dissipation of iron should be smaller than 15W, and temperatures should be controllable .Surface temperature of the device should be under 230℃ . ITEM Resin (mold) Lens color Printed circuit board For reflow soldering (Propose) Material Emitted color MATERIALS Epoxy Yellow Diffused BT InGaN White NOTES: 1. All dimensions are in millimeters (inches); 2. Tolerances are ±0.1mm (0.004inch) unless otherwise noted. 3. Polarity referring onto the cathode mark is reversed on the red. 2009/2/20 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-21UWC ELECTRO-OPTICAL CHARACTERISTICS (SDR) Parameter Viewing angle at 50% IV Forward voltage Luminous intensity Chromaticity (TA=25℃) Value MIN. TYP. MAX. Test Condition Symbol IF=10mA IF=20mA IF=20mA IF=20mA 2θ1/2 VF IV X Y Unit Deg V mcd − 120 − − − − 3.2 3.5 290 − 0.31 − 0.32 − 100 Peak pulsing current (1/10 duty f=1kHz) IFP mA Absolute maximum ratings (SDR) Parameter Forward current Reverse voltage Reverse current Electrostatic Discharge Power Dissipation Operating temperature range Storage temperature range (TA=25℃) Symbol IF VR IR ESD PD Top Tstg Value 25 5 50 150 110 -40 ~+85 -40 ~+100 Unit mA V μA V mW ℃ ℃ 2009/2/20 A-BRIGHT Part Number: 67-21UWC A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Test items and results of reliability NO 1 Item Solder Heat Test Conditions TEMP：260±5℃ H：+100℃ 30min ∫ 5min L：-40℃ 30min H：+100℃ 5min ∫ 10set L：-10℃ 5min TEMP：100℃ Test Sample Size Ac/Re Hours/Cycle 6 min. 22 PCS 0/1 2 Temperature Cycle 300 CYCLES 22 PCS 0/1 3 Thermal Shock 300 CYCLES 22 PCS 0/1 4 High Temperature Storage 1000 HRS 22 PCS 0/1 5 Low Temperature Storage TEMP：-40℃ 1000 HRS 22 PCS 0/1 6 DC Operating Life IF=20mA 1000 HRS 22 PCS 0/1 7 High Temperature / High Humidity 85℃ / 85%RH 1000 HRS 22 PCS 0/1 ＊ Refer to reliability test standard specification for in this line. 2009/2/20 A-BRIGHT Part Number: 67-21UWC Color Ranks A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS 2009/2/20 A-BRIGHT Part Number: 67-21UWC A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Typical Electro-Optical Characteristics 2009/2/20 A-BRIGHT Part Number: 67-21UWC A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Typical Electro-Optical Characteristics 2009/2/20