99-213UWC_09

A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS TFT DISPLAY LED Part Number: 99-213UWC Package outlines & Re-flow Profile Reflow Temp/Time Soldering iron Basic spec is 5sec when 260℃. If temperature is higher, time should be shorter (+10℃ -1sec ).Power dissipation of iron should be smaller than 15W, and temperatures should be controllable .Surface temperature of the device should be under 230℃ . ITEM Resin (mold) Lens color Printed circuit board Emitted color Material MATERIALS Epoxy Yellow Diffused BT White InGaN NOTES: 1. All dimensions are in millimeters (inches); 2. Tolerances are ±0.1mm (0.004inch) unless otherwise noted. 3. Polarity referring onto the cathode mark is reversed on the red. 2009/2/20 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 99-213UWC ELECTRO-OPTICAL CHARACTERISTICS Parameter Viewing angle at 50% IV Forward voltage Luminous intensity Chromaticity (TA=25℃) Value MIN. TYP. MAX. Test Condition Symbol IF=10mA IF=20mA IF=20mA IF=20mA 2θ1/2 VF IV X Y Unit Deg V mcd --mA 110 --3.2 3.6 --- 1000 --- --- 0.31 ----- 0.32 --60 Peak pulsing current (1/10 duty f=1kHz) IFP Absolute maximum ratings (SDR) Parameter Forward current Reverse voltage Reverse current Electrostatic Discharge Power Dissipation Operating temperature range Storage temperature range (TA=25℃) Symbol IF VR IR ESD PD Top Tstg Value 30 5 50 150 120 -30 ~+85 -40 ~+100 Unit mA V μA V mW ℃ ℃ 2009/2/20 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 99-213UWC Test items and results of reliability Sample Q’ty 30 pcs NO 1 ITEM Solder Heat Test Conditions Temp：260℃±5℃ -40℃ -25℃ 30min 5min Test hours/cycle 5 sec Ac/Re 0/1 2 Temperature Cycle -105℃ 30min -25℃ -40℃ 5min 5min 100 cycles 30 pcs 0/1 3 Thermal Shock -105℃ 5min 20 cycles 30 pcs 0/1 4 High Temperature Storage Temp：85℃ 1000 hrs 30 pcs 0/1 5 Low Temperature Storage Temp：-35℃ 1000 hrs 30 pcs 0/1 6 DC Operating Life High Temperature／ High Humidity IF=350mA Ta=60℃ R.H 90% 1000 hrs 30 pcs 0/1 7 1000 hrs 30 pcs 0/1 ＊ Refer to reliability test standard specification for in this line. 2009/2/20 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 99-213UWC Color Ranks 2009/2/20 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 99-213UWC Typical Electro-Optical Characteristic Curves 2009/2/20 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 99-213UWC Typical Electro-Optical Characteristic Curves 2009/2/20