99-215UWC-TR8

A-BRIGHT TFT DISPLAY LED A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 99-215UWC/TR8 Package outlines & Re-flow Profile Reflow Temp/Time Soldering iron Basic spec is 5sec when 260℃. If temperature is higher, time should be shorter (+10℃ -1sec ).Power dissipation of iron should be smaller than 15W, and temperatures should be controllable .Surface temperature of the device should be under 230℃ . ITEM Resin (mold) Lens color Printed circuit board Emitted color Material MATERIALS Epoxy Yellow Diffused BT White InGaN NOTES: 1. All dimensions are in millimeters (inches); 2. Tolerances are ±0.1mm (0.004inch) unless otherwise noted. 3. Polarity referring onto the cathode mark is reversed on the red. 2006/10/18 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 99-215UWC/TR8 ELECTRO-OPTICAL CHARACTERISTICS Parameter Viewing angle at 50% IV Forward voltage Luminous intensity Chromaticity (TA=25℃) Value MIN. TYP. MAX. Test Condition Symbol IF=10mA IF=20mA IF=20mA IF=20mA 2θ1/2 VF IV X Y Unit Deg V mcd --mA 115 --3.4 3.8 500 1100 --- --- 0.31 ----- 0.32 --60 Peak pulsing current (1/10 duty f=1kHz) IFP Absolute maximum ratings (SDR) Parameter Forward current Reverse voltage Reverse current Electrostatic Discharge Power Dissipation Operating temperature range Storage temperature range (TA=25℃) Symbol IF VR IR ESD PD Top Tstg Value 30 5 50 150 120 -30 ~+85 -40 ~+100 Unit mA V µA V mW ℃ ℃ 2006/10/18 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 99-215UWC/TR8 Test items and results of reliability Sample Q’ty 30 pcs NO 1 ITEM Solder Heat Test Conditions Temp：260℃±5℃ -40℃ 30min 5min Test hours/cycle 5 sec Ac/Re 0/1 2 Temperature Cycle -25℃ 100 cycles 30 pcs 0/1 -105℃ 30min -25℃ 3 Thermal Shock -40℃ -105℃ 4 High Temperature Storage 5min 5min 5min 1000 hrs 30 pcs 0/1 20 cycles 30 pcs 0/1 Temp：85℃ 5 6 Low Temperature Storage DC Operating Life High Temperature／ High Humidity Temp：-35℃ IF=350mA Ta=60℃ R.H 90% 1000 hrs 1000 hrs 30 pcs 30 pcs 0/1 0/1 7 1000 hrs 30 pcs 0/1 ＊ Refer to reliability test standard specification for in this line. 2006/10/18 A-BRIGHT Color Ranks A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 99-215UWC/TR8 2006/10/18 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT HIP LED LAMPS Part Number: 99-215UWC/TR8 Typical Electro-Optical Characteristic Curves 2006/10/18 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT HIP LED LAMPS Part Number: 99-215UWC/TR8 Typical Electro-Optical Characteristic Curves 2006/10/18