ATP53SL-01CGM

RF POWER ATTENUATOR The content of this specification may change without notification 10/16/07 Custom solutions are available. ATP Series - RF Power Attenuators Custom solutions are available. Call us with your specification requirements. HOW TO ORDER ATP 53 SL-10 D G M Packaging Impedance Tolerance G = ±2% Characteristic Impedance D = 5 0Ω C = 75Ω Attenuation 01 = 1dB Package Type D = balanced coaxial DL = balanced, smd with leads S = unbalanced coaxial SL = unbalanced smd with leads E = balanced with heat sink Size 53 = 5.00 x 2.70 54 = 5.00 x 3.80 55 = 5.00 x 4.50 84 = 8.00 x 5.25 68 = 6.70 x 8.65 100 = 8..89 x 5.35 120 = 9.53 x 6.35 150 = 11.43 x 7.62 37 = 13.0 x 7.00 FEATURES 4GHz-1/4W, 1.0GHz - 30W, 3.0GHz - 100W, 2.4GHz120W, and 2.0GHz - 150W Surface Mount Small Size Attenuators 50Ω Characteristic Impedance Face down configuration on strip line show better return loss characteristics. Long life and temperature stability of thin film technology provide better performance at a temperature range from -55°C ~ +155 °C. APPLICATIONS Gain Control Circuits Power Boost Amplifiers (GHz) Isolation Circuits Transmission Line Loss Compensation for Data Communications Systems Detecting signal control of ATE-LSI test system circuit board functional test systems Industrial measurement electronics Medical scientific electronics Communications systems ATP Series RF Power Attenuators ELECTRICAL SPECIFICATIONS Part Package Type Frequency ATP37 S, D, DL DC – 1.0 GHz ATP53 S, SL DC – 4.0 GHz ATP54 D, DL DC – 4.0 GHz ATP55 S, D DC – 4.0 GHz ATP68 E DC – 1. 0GHz ATP84 S, D DC – 1.0 GHz ATP100 D, DL DC – 3.0 GHz ATP120 D, DL DC – 2.4 GHz ATP150 D, DL DC – 2.0 GHz * Heat Sink will be required starting 30 WATTS. Power Rating 1.00 W 0.25 W 0.25 W 0.25 W 30.0 W 0.50 W 100 W 120 W 150 W Attenuation Availability 1db ~ 10db, 20dB, 30db, 40dB 1db ~ 10db, 20dB, 30db, 40dB 1db ~ 10db, 20dB, 30db, 40dB 1db ~ 10db, 20dB, 30db, 40dB 10 dB, 20 dB, 30dB 1db ~ 10db, 20dB, 30db, 40dB 10 dB, 20 dB, 30dB, 40dB 10 dB, 20 dB, 30dB, 40dB 10 dB, 20 dB, 30dB, 40dB Attenuation Tolerance Impedance dB 1~6 7 ~ 10 20, 30, 40 dB Tolerance ±0.2 ±0.3 ±0.4 50 Ω ± 1 Ω or 75Ω ± 1Ω CIRCUIT & INSTALLATION LAYOUTS Face Down - RF Signal will be propagated straight without reflection ATP100D, ATP120D, ATP150D ATP100DL, ATP120DL, ATP150DL NOTES: 1. In order to cool heat from an attenuator and to connect electrically when you attach the attenuator in a printed circuit a metal plate, reserve soldering on back side of attenuator and reflowing (re-melting) solder with solder iron are recommended. 2. In order to prevent diffusion of grounding conductor, please carry out solder processing of an attenuator quickly. American Accurate Components, Inc. 188 Technology Drive Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 Email: sales@aacix.com 1 RF POWER ATTENUATOR The content of this specification may change without notification 10/16/07 DIMENSIONS (mm) Part ATP37 ATP53 ATP54 ATP55 ATP68 ATP84 ATP100D ATP100DL ATP120D ATP120DL ATP150D ATP150DL A 13.00 5.00 5.00 5.00 6.70 8.00 8.89 9.53 11.43 B 7.00 2.70 3.80 4.50 8.65 5.25 5.84 6.35 7.62 C 0.70 0.70 0.70 0.70 1.05 0.70 1.1 max 2.2 max 1.1 max 2.2 max 1.1 max 2.2 max D 2.00 1.20 1.20 1.20 1.00 1.40 1.0 1.0 1.0 E 1.40 0.80 0.80 1.00 0.80 1.10 0.3 0.3 0.3 F 1.5 1.5 1.5 G 0.1 0.1 0.1 H 6.35 6.35 6.35 J 1.2 1.2 1.2 SCHEMATIC ATP53S ATP55S ATP84S ATP37S ATP54S ATP55D ATP84D ATP37D ATP54D ATP68D ATP100D, 120D, 150D ATP100DL, 120DL, 150DL American Accurate Components, Inc. 188 Technology Drive Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 Email: sales@aacix.com 2 RF POWER ATTENUATOR The content of this specification may change without notification 10/16/07 PERFORMANCE SPECIFICATION Item Characteristic Impedance Impedance Tolerance Attenuation Tolerance TC of Impedance TC of Attenuation Temperature Rating Soldering Heat Solder Capability Humidity Load Life Operating & Storage Temp. ATP37, ATP53S, ATP54D, ATP84 ATP100, ATP120, ATP150 Test Condition Available in 75Ω Input DC resistance in terminating output with resistors Output DC volt in terminating output with resistor when stable 1V DC volt source connect to input. TC of input DC resistance in terminating output with resistor TC of output DC volt in terminating output with resistor when stable 1V DC volt source connect to input 50Ω default ±2% Refer to electrical specifications ±50ppm/°C ±50ppm/°C -55°C ~ +70°C ±1% 95% covered ±1% ±1% -55°C ~ 155°C -55°C ~ 100°C 350°C, 3 seconds dipping Input DC resistance change under condition of 40°C temp.l and 9095% RH, rating powering On-90min., Off-30 min., 1000 hours Input DC resistance change under condition of 70°C temp. rating power On-90 min., Off-30 min., 1000 hours DERATING CURVE MATERIALS Back Plate Temperature A B C D E Name Cover Beam Lead Contact Substrate Conductor Material Alumina Cu Alloy Epoxy AIN Cu Finish Au Plating Tin Plating RF CHARACTERISTICS – ATP100, ATP120, ATP150 Frequency MHz 1 3 10 30 100 300 1000 3000 6000 R 50.143 50.199 50.186 50.141 50.049 49.297 42.735 36.666 69.941 S11 X -9.765m -44.203 -101.42m -277.34m -917.97m -2.6406 -4.640 20.432 -59.055 R 60.975 60.953 60.99 60.971 60.682 58.473 45.205 60.824 58.973 S21 X 0.0918 0.1523 0.2754 0.7324 2.4414 6.6932 8.1602 -3.0201 -8.752 R 60.959 60.986 60.99 60.971 60.687 58.457 45.199 60.803 58.969 S12 X 0.0859 0.1367 0.2441 0.7168 2.4355 6.6621 8.1582 -3.221 -8.709 R 50.107 50.119 50.092 49.994 49.223 47.293 59.344 46.342 32.661 S22 X 0.0156 0.0586 0.1777 0.5155 0.6194 -8.162 4.335 -23.73 22.164 American Accurate Components, Inc. 188 Technology Drive Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 Email: sales@aacix.com 3 RF POWER ATTENUATOR The content of this specification may change without notification 10/16/07 RF CHARACTERISTICS – ATP53, ATP54, ATP55, ATP68, ATP85, ATP37 ATP55D-20DGM Impedance ATP55D-40DGM Impedance ATP55D-20DGM Attenuation ATP55D-40DGM Attenuation ATP55D-20DGM VSWR ATP55D-40DGM VSWR American Accurate Components, Inc. 188 Technology Drive Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 Email: sales@aacix.com 4