CRH12-107M3B

CRH – Thick Film Chip Resistors High Resistance The content of this specification may change without notification 09/15/08 HOW TO ORDER CRH 10107 K 1 M Packaging M = 7” Reel B = Bulk Case Termination Material Sn = Leave Blank SnPb = 1 AgPd = 2 Au = 3 (avail in CRH-A series only) Tolerance (%) M = +20 P = +50 N = +30 K = +10 FEATURES J = +5 G = +2 F = +1 Stringent specs in terms of reliability, stability, and quality. Available in sizes as small as 0502 Resistance Range up to 150 Gig ohms E-24 and E-96 Series EIA Resistance Code Three digits for > 5% tolerance Four digits for 1% tolerance Size 05 = 0402 16 = 0603 10 = 0805 18 = 1206 14 = 1210 12 = 2010 01 = 2512 Low Voltage Coefficient of Resistance Wrap Around Terminal for Solder Flow RoHS/Lead Free in Sn, AgPd, and Au Termination Materials Series High ohm chip resistors SCHEMATIC CRH CRH-A, CRH-B Termination Material: Sn or SnPb or AgPd or Au Overcoat Conductor Ceramic Substrate Resistive Element DIMENSIONS (mm) Series CRH05 CRH05B CRH16 CRH16A CRH16B CRH10 CRH10A CRH10B CRH18 CRH18A CRH18B CRH14 CRH12 CRH01 CRH01A 1210 2010 2512 1206 0805 0603 Size 0402 0402 L 1.0 ± 0.05 1.0 ± 0.05 1.60 ± 0.15 1.60 ± 0.10 1.60 ± 0.10 2.10 ± 0.15 2.00 ± 0.20 2.00 ± 0.20 3.10 ± 0.15 3.20 ± 0.20 3.20 +0.05 -0.20 W 0.50 ± 0.05 0.50 ± 0.05 0.80 ± 0.15 0.80 ± 0.10 0.80 ± 0.10 1.25 ± 0.15 1.25 ± 0.20 1.25 ± 0.10 1.55 ± 0.15 1.60 ± 0.20 1.60 +0.05 -0.15 t 0.35 ± 0.05 0.30 ± 0.05 0.45 ± 0.10 0.45 ± 0.10 0.45 ± 0.10 0.55 ± 0.10 0.50 ± 0.10 0.50 ± 0.10 0.55 ± 0.10 0.55 ± 0.10 0.60 ± 0.10 0.55 ± 0.10 0.55 ± 0.10 0.55 ± 0.10 0.55 ± 0.10 a 0.20 ± 0.1 0.20 ± 0.1 0.30 ± 0.20 0.20 ± 0.10 0.30 ± 0.20 0.40 ± 0.20 0.40 ± 0.20 0.40 ± 0.20 0.50 ± 0.20 0.50 ± 0.30 0.50 ± 0.25 0.50 ± 0.20 0.80 ± 0.20 0.80 ± 0.20 0.50 ± 0.30 0.25 0.25 b +0.05 -0.10 +0.05 -0.10 Package Qty 10,000 10,000 0.30 ± 0.20 0.30 ± 0.10 0.30 ± 0.20 0.40 MAX 0.40 ± 0.20 0.40 ± 0.20 0.50 MAX 0.50 ± 0.30 0.50 ± 0.20 0.50 MAX 0.80 MAX 1.30 MAX 0.50 ± 0.30 5,000 4,000 4,000 5,000 5,000 5,000 3.10 ± 0.15 5.10 ± 0.15 6.40 ± 0.15 6.40 ± 0.20 2.65 ± 0.15 2.60 ± 0.15 3.10 ± 0.15 3.2 ± 0.20 American Accurate Components, Inc. 188 Technology Drive, Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 1 CRH – Thick Film Chip Resistors High Resistance The content of this specification may change without notification 09/15/08 ELECTRICAL CHARACTERISTICS Voltage (Max.)* Series Size Rated Power 1/20 w 1/16w 1/10w 1/8w 1/4w 1/2w 1w Working 25 V 50 V 150 V 200 V 200 V 200 V 200 V Overload 50 V 100 V 300 V 400 V 400 V 400 V 400 V Operating Temperature -55 ~ +155°C -55 ~ +155°C -55 ~ +155°C -55 ~ +155°C -55 ~ +155°C -55 ~ +155°C -55 ~ +155°C ±1% +400 ~ -100 ppm Resistance Range by Tolerance& TCR (ppm/°C) ±5% ±500 ppm 10M ~ 100M 10M ~ 100M 10M ~ 100M 10M ~ 100M 10M ~ 100M 10M ~ 100M 10M ~ 100M ±10% ±500 ppm 10M ~ 100M 10M ~ 470M 10M ~ 470M 10M ~ 470M 10M ~ 470M 10M ~ 470M 10M ~ 470M ±20% ±500 ppm 10M ~ 100M 10M ~ 1.0G 10M ~ 1.0G 10M ~ 1.0G 10M ~ 1.0G 10M ~ 1.0G 10M ~ 1.0G CRH05 CRH16 CRH10 CRH18 CRH14 CRH12 CRH01 0402 0603 0805 1206 1210 2010 2512 10M ~ 100M 10M ~ 100M 10M ~ 100M 10M ~ 100M 10M ~ 100M 10M ~ 100M 10M ~ 100M Voltage (Max.)* Series Size Rated Power 1/32w 1/16w 1/8w 1w Working 50V 75 V 150 V 300 V Overload 100V 150 V 300 V 500 V Operating Temperature -55 ~ 125°C -55 ~ +125°C -55 ~ +125°C -55 ~ +125°C Resistance Range by Tolerance & TCR (ppm/°C) ±1%, ±2% ±100 ppm 1.0M ~ 50M 1.0M ~ 50M 1.0M ~ 50M ±5% ±1500 ppm 1.0M ~ 50M 1.0M ~ 50M 1.0M ~ 50M 1.0M ~ 50M ±10% ±1500 ppm 1.0M ~ 150G 1.0M ~ 150G 1.0M ~ 150G 1.0M ~ 150G ±20 ±30 ±50% ±1500 ppm 1.0M ~ 150G 1.0M ~ 150G 1.0M ~ 150G 1.0M ~ 150G CRH16A CRH10A CRH18A CRH01A 0603 0805 1206 2512 Voltage (Max.)* Series CRH05B CRH16B CRH10B CRH18B Size 0402 0603 0805 1206 Rated Power 1/16w 1/16w 1/10w 1/8w Working 50 V 50 V 150 V 200 V Overload 100 V 100 V 300 V 400 V Operating Temperature Resistance Range by Tolerance & TCR (ppm/°C) ±5%, ±10%, ±20% ±500 ppm -55 ~ +125°C -55 ~ +125°C -55 ~ +125°C -55 ~ +125°C 10M ~ 100M 43M ~ 1.0G 43M ~ 1.0G 43M ~ 1.0G 1.2G ~ 10G 1.2G ~ 10G ±1500 ppm * Rated Voltage = DERATING CURVE If the ambient temperature exceeds 70°C, then the rated power must be derated according to the power derating curve shown to the right. PERFORMANCE Test Item Long Term Stability High Temperature Loading Resistance to Soldering Heat Short Time Overload Operating Temperature Range Test Conditions Normal temperature and humidity for 1,000 hours DC15V, 1.5 hours on, 0.5 hours off, 1,000 hours at 70°C 260°C + 5°C for 10+1-0 seconds Test for 5 seconds using maximum Overload Voltage Refer to electrical charachteristics Test Results ±100ppm parts > ±100ppm parts ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±1.0% ±1.0% ±1.0% American Accurate Components, Inc. 188 Technology Drive, Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 2