CRL12R20FNM

CURRENT SENSE RESISTORS The content of this specification may change without notification 09/24/08 CRL Series - Low Ohm Surface Mount Chip Resistors HOW TO ORDER CRL10 R020 J N M Packaging M = Tape/Reel B = Bulk N=+300 Custom solutions are available. FEATURES Resistance Tolerances as low as +1% TCR as low as + 100ppm Wrap Around Terminal for Flow Soldering Anti-Leaching Nickel Barrier Terminations RoHS Compliant Applicable Specifications: EIA575, MIL-R-55342F, and CECC40401 TCR (PPM/°C) K=+100 L=+200 O=+400 Q=+600 Tolerance (%) F = +1 G = +2 J = +5 EIA Resistance Value Standard decade values Series Size CRL05 = 0402 CRL16 = 0603 CRL10 = 0805 CRL18 = 1206 CRL14 = 1210 CRL12 = 2010 CRL01 = 2512 CRL01P = 2512 CRL1S = 3720 CRL02 = 7520 DERATING CURVE DIMENSIONS (mm) Size 0402 0603 0805 1206 1210 2010 2512 2512-P 3720 7520 L 1.00 + 0.05 1.60 + 0.10 2.00 + 0.15 3.10 + 0.15 3.20 + 0.20 5.00 + 0.15 6.30 + 0.15 6.30 + 0.20 3.75 + 0.20 7.50 + 0.20 W 0.50 + 0.05 0.80 + 0.10 1.25 + 0.15 1.55 + 0.15 + 0.20 – 0.10 2.50 2.50 + 0.15 3.10 + 0.15 3.20 + 0.20 2.00 + 0.20 2.00 + 0.20 D1 0.25 + 0.10 0.30 + 0.20 0.30 + 0.20 0.50 + 0.30 0.50 + 0.20 0.60 + 0.30 0.60 + 0.30 0.70 + 0.30 0.40+ 0.20 0.40+ 0.20 D2 0.20 + 0.10 0.30 + 0.20 0.30 + 0.20 0.40 + 0.20 0.50 + 0.20 0.50 + 0.25 0.50 + 0.25 2.20 + 0.20 0.40 + 0.20 0.40 + 0.20 Tt 0.32 + 0.05 0.45 + 0.10 0.50 + 0.10 0.60 + 0.10 0.60 + 0.10 0.60 + 0.10 0.60 + 0.10 0.60 + 0.10 0.60 + 0.10 0.60 + 0.10 ELECTRICAL CHARACTERISTICS Operating Voltage V = √(P*R) Size 0402 0603 0805 1206 1210 2010 2512 2512-P 3720 7520 Operating Current I = √(P/R) Tolerance (%) ±1, ±2, ±5 ±1, ±2, ±5 ±1, ±2, ±5 ±1, ±2, ±5 ±1, ±2, ±5 ±1, ±2, ±5 ±1, ±2, ±5 ±1, ±2, ±5 ±1, ±2, ±5 ±1, ±2, ±5 ±600 0.020 ~ 0.050 0.020 ~ 0.050 Max TCR (ppm/°C) Per Resistance Range in Ω ±400 ±300 ±200 0.021 ~ 0.049 0.050 ~ 0.910 0.021 ~ 0.049 0.050 ~ 0.910 0.021 ~ 0.049 0.050 ~ 0.910 0.021 ~ 0.049 0.050 ~ 0.910 0.100 ~ 0.18 0.021 ~ 0.049 0.050 ~ 0.910 0.021 ~ 0.049 0.050 ~ 0.910 0.010 ~ 0.050 0.001 ~ 0.010 ±100 Rated Power 1/16 W 1/8 W 1/4 W 1/2 W 1/2W 3/4 W 1W 2W 1W 2W 0.200 ~ 1.00 0.100 ~ 1.00* PERFORMANCE Item Temp. Coefficient of Resistance Short Time Overload Dielectric Withstand Voltage Insulation Resistance Thermal Shock Load Life Humidity (Stable State) Resistance to Dry Heat Low Temperature Operation Bending Strength Solderability Resistance to Soldering Heat Specification As Spec ±(0.5% + 0.05Ω) By type >1000M Ω ±(0.5% + 0.05Ω) ±(1% + 0.05Ω) ±(1% + 0.05Ω) ±(0.5% + 0.05Ω) ±(0.5% + 0.05Ω) ±(0.5% + 0.05Ω) 95% min. Coverage ±(0.5% + 0.05Ω) Test Method MIL-STD-202F, Method 304 304 +25/-55/+25/+125/+25°C JIS-C-5202-5.5 RCWV*2.5orMax Overloading Voltage 5 seconds MIL-STD-202F, Method 301 Apply Max Overload Voltage for 1 minute MIL-STD-202F, Method 302 Apply 100VDC for 1 minute MIL-STD-202F, Method 107G -55°C ~ + 150°C, 100 cycles MIL-STD-202F, Method 108A RCWV 70°C, 1.5 hrs ON, 0.5 hrs off, 1000 ~ 1048 hrs MIL-STD-202F, Method 103B 40°C, 90~95%RH , RCWV 1.5 hrs ON, 0.5 hrs OFF, total 1000 ~ 1048 hrs JIS-C-5202 7.2 96 hours @ +125°C without load JIS-C-5202 7.1 1 hour, -65°C followed by 45 minutes if RCWV JIS-C-5202 6.1.4 Bending Amplitude 3mm for 10 seconds MIL-STD-202F, Method 208H 235°C±5°C, 2±0.5 (sec) MIL-STD-202F, Method 210E 260±5°C ,10±1second American Accurate Components, Inc. 188 Technology Drive, Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 Operating Temp. Range is -55°C ~ + 150°C 1