CRT20-1003GM

THICK FILM CHIP RESISTORS The content of this specification may change without notification 10/04/07 Tin / Tin Lead / Silver Palladium Non-Magnetic / Gold Terminations Available HOW TO ORDER CR G 10- 1003 F M Packaging M = 7” Reel V = 13” Reel B = Bulk Custom solutions are available. Tolerance (%) J = + 5 G = +2 F = + 1 EIA Resistance Value Standard Decade Values Size 00 = 01005 20 = 0201 05 = 0402 16 = 0603 10 = 0805 18 = 1206 14 = 1210 12 = 2010 01 = 2512 01P = 2512-P FEATURES Excellent stability over a wide range of environmental conditions CR and CJ types in compliance with RoHs CRP and CJP non-magnetic types constructed with AgPd Terminals, Epoxy Bondable CRG and CJG types constructed top side terminations, wire bond pads, with Au termination material. Operating temperature -55°C ~ +125°C Appl. Specifications: EIA 575, IEC 60115-1, JIS 5201-1, and MIL-R-55342G Termination Material Sn = Leave Blank Au = G SnPb = T AgPd = P Series CJ = Jumper CR = Resistor SCHEMATIC Wrap Around Terminal CR, CJ, CRP, CJP type Top Side Termination, Bottom Isolated CRG, CJG type Wrap Around Termination Material: Sn or SnPb or AgPd SO/ S Overcoat C f Conductor Wire Bond Pads Terminal Material: Au Ceramic Substrate Resistive Element DIMENSIONS (mm) Size 01005 0201 0402 0603 0805 1206 1210 2010 2512 2512-P Size Code 00 20 05 16 10 18 14 12 01 01P L 0.40 + 0.02 0.60 + 0.03 1.00 + 0.05 1.60 + 0.10 2.00 + 0.15 3.20 + 0.15 3.20 + 0.20 5.00 + 0.20 6.30 + 0.20 6.50 + 0.30 W 0.20 + 0.02 0.30 + 0.03 0.5+0.1-0.05 0.80 + 0.10 1.25 + 0.15 1.60 + 0.15 2.60 + 0.20 2.50 + 0.20 3.10 + 0.20 3.20 + 0.20 c 0.08 + 0.03 0.10 + 0.05 0.20 + 0.10 0.20 + 0.10 0.40 + 0.25 0.45 + 0.25 0.50 + 0.30 0.50 + 0.30 0.50 + 0.30 0.60 + 0.30 d 0.10 + 0.03 0.15 + 0.05 0.25+0.05-0.10 0.30+0.20-0.10 0.30+0.20-0.10 0.40+0.20-0.10 0.40+0.20-0.10 0.50+0.20-0.10 0.50+0.20-0.10 1.50 + 0.30 t 0.12 + 0.02 0.25 + 0.05 0.35 + 0.05 0.50 + 0.10 0.50 + 0.15 0.60 + 0.15 0.60 + 0.10 0.60 + 0.10 0.60 + 0.15 0.60 + 0.10 ELECTRICAL SPECIFICATIONS for CHIP RESISTORS Size Power Rating (EIA 575) Working Voltage* Overload Voltage Tolerance (%) EIA Values Resistance TCR (ppm/°C) Operating Temp. 01005 0.031 (1/32) W 15V 30V ±5 E-24 10 ~ 1.0M ± 250 -55°C ~ +125°C ±1 E-96 10 ~ 1M ± 200 0201 0.05 (1/20) W 25V 50V ±2 E-24 1.0~9.1, 10~10M +600 -200 0402 0.063(1/16) W 50V 100V ±5 ±1 E-96 1.0~9.1, 10~10M +500 -200 ±2 E-24 ±5 1.0~9.1, 10~10M +500 -200 , ± 200 , ± 200 , ± 200 -55°C ~ +125°C -55°C ~ +125°C American Accurate Components, Inc. 188 Technology Drive Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 Email: sales@aacix.com 1 THICK FILM CHIP RESISTORS The content of this specification may change without notification 10/04/07 Size Power Rating (EIA 575) Working Voltage* Overload Voltage Tolerance (%) EIA Values Resistance TCR (ppm/°C) Operating Temp. Size Power Rating (EIA 575) Working Voltage* Overload Voltage Tolerance (%) EIA Values Resistance TCR (ppm/°C) Operating Temp. * Rated Voltage: √PxR ±1 ±1 E-96 10 ~ 1 M ±100 0603 0.100 (1/10) W 50V 100V ±2 ±5 E-24 1.0~9.1, 10~10M ±400, ±200 ±1 E-96 10 ~ 1 M ±100 0805 0.125 (1/8) W 100V 200V ±2 ±5 E-24 1.0~9.1, 10~10M ±400, ±200 ±1 E-96 10 ~ 1 M ±100 1206 0.250 (1/4) W 200V 400V ±2 ±5 E-24 1.0~9.1, 10~10M ±400, ±200 ±1 E-96 10 ~ 1 M ±100 1210 0.33 (1/3) W 200V 400V ±2 ±5 E-24 1.0~9.1, 10~10M ±400, ±200 -55°C ~ +125°C 2010 0.500 (1/2) W 200V 400V ±2 E-24 -55°C ~ +125°C 2512 1.0 W 200V 400V ±5 ±1 E-96 10 ~ 1 M ±100 -55°C ~ +125°C -55°C ~ +125°C 2512-P 2.0 W 200V 400V ±2 E-24 ±5 ±1 E-96 1.0 ~ 1.0M ±100 ±2 E-24 ±5 1.0 ~ 1.0M ±100 E-96 10 ~ 1 M ±100 1.0~9.1, 10~10M ±400, ±200 1.0~9.1, 10~10M ±400, ±200 -55°C ~ +125°C -55°C ~ +125°C -55°C ~ +155°C ELECTRICAL SPECIFICATIONS for ZERO OHM JUMPERS Series Rated Current Resistance (Max) Max. Overload Current Working Temp. * Rated Voltage: √PxR CJ20 (0201) 0.5A (70°C) 50 m Ω 1A -55°C ~ +125°C CJ05 (0402) 1A (70°C) 50 m Ω 2.5A -55°C ~ +125°C CJ06 (0603) 1A (70°C) 50 m Ω 2.5A -55°C ~ +125°C CJ10 (0805) 2A (70°C) 50 m Ω 5A -55°C ~ +125°C CJ18 (1206) 2A (70°C) 50 m Ω 5A -55°C ~ +125°C CJ14 (1210) 2A (70°C) 50 m Ω 5A -55°C ~ +125°C CJ12 (2010) 2A (70°C) 50 m Ω 5A -55°C ~ +125°C CJ01 (2512) 2A (70°C) 50 m Ω 5A -55°C ~ +125°C DERATING CURVE For resistors operated at ambient temperature over 70°, power rating shall be derated in accordance with figure 1. Figure 1 The rated voltage is calculated by the following formula: E= √P * R E=Rated Voltage(V) P=Rated Power(W) R=Resistance Value(Ω) 188 Technology Drive Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 Email: sales@aacix.com 2 American Accurate Components, Inc. THICK FILM CHIP RESISTORS The content of this specification may change without notification 10/04/07 CHARACTERISTICS Test Item Short Time Overload Load Life Thermal Shock High Temperature Exposure Terminal Strength Moisture Resistance Solderability Maximum ∆ Ω +0.05Ω ± 2% & ± 5% Tolerance ± 1% & ± 0.5% Tolerance ± 0.75% ± 1.50% ± 0.25% ± 0.50% ± 0.50% ± 1.00% 95% minimum coverage ± 0.50% ± 1.00% ± 0.50% ± 1.25% ± 0.50% ± 0.50% 95% minimum coverage Test Conditions EIA Standard 575, π 3.6 2.5 x rated voltage for 5 seconds EIA Standard 575, π 3.14 90 minutes on; 30 minutes off for 1000 hours EIA Standard 575, π 3.5 -55°C ~ +150°C for 5 cycles EIA Standard 575, π 3.7 125°C ± 5°C continuous for 100 hours EIA Standard 575, π 3.9 20gms @ 90° angle for 30 seconds EIA Standard 575, π 3.10 EIA Standard 575, π 3.12 3 seconds of immersion @ +215°C EIA Standard Values Decade Values in the EIA Standard E-24 Series: 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 Decade Values in the EIA Standard E-96 Series: 1.02 1.05 1.07 1.10 1.13 1.18 1.21 1.24 1.27 1.30 1.37 1.40 1.43 1.47 1.50 1.58 1.62 1.65 1.69 1.74 1.82 1.87 1.91 1.96 2.00 2.10 2.15 2.21 2.26 2.32 2.43 2.49 2.55 2.61 2.67 2.80 2.87 2.94 3.01 3.09 3.24 3.32 3.40 3.48 3.57 3.74 3.83 3.92 4.02 4.12 4.32 4.42 4.53 4.64 4.75 4.99 5.11 5.23 5.36 5.49 5.76 5.90 6.04 6.19 6.34 6.65 6.81 6.98 7.15 7.32 7.68 7.87 8.06 8.25 8.45 8.87 9.09 9.31 9.53 9.76 103 0603, 0805, 1206, 1210, 2010, 2512 Sizes EIA 3 Digit Code of 10K ohm resistor E-24 Values, E-96 Values 0805, 1206, 1210, 2010, 2512 Sizes EIA 4 Digit Code of 121K ohm resistor E-96 Values 1213 1.00 1.15 1.33 1.54 1.78 2.05 2.37 2.74 3.16 3.65 4.22 4.87 5.62 6.49 7.50 8.66 0603 MARKING CODE for E96 VALUES By combining a specific two digit number and a letter code, you have a series of numeric/alpha digits that give you the complete (E96) resistance value codes for 0603 size part marking. Value Code Value Code Value Code Value Code Those items in a shaded box are also E-24 values and will be marked with the EIA 3 Digit Code. VALUE MARKING For those parts ordered with an E-24 value, the product will be marked with a 3 digit code. For those products ordered with an E-96 value, the product will be marked with a 4 digit code. For those parts which fall under E-96 and E-24 values (e.g. 1K ohm is both an E-96 and E-24 value), the part will be marked with a 3 digit code; 4 digit markings for this type is available upon special request. 01005, 0201, and 0402 Size No marking E-24 & E-96 Values 0603 Size EIA 96 Digit Code of 3.32K ohm E-96 Values 10.0 10.2 10.5 10.7 11.0 11.3 11.5 11.8 12.1 12.4 12.7 13.0 13.3 13.7 14.0 14.3 14.7 15.0 15.4 15.8 16.2 16.5 16.9 17.4 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 17.8 18.2 18.7 19.1 19.6 20.0 20.5 21.0 21.5 22.1 22.6 23.3 23.7 24.3 24.9 25.5 26.1 26.7 27.4 28.0 28.7 29.4 30.1 30.9 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 31.6 32.4 33.2 34.0 34.8 35.7 36.5 37.4 38.3 39.2 40.2 41.2 42.2 43.2 44.2 45.3 46.4 47.5 48.7 49.9 51.1 52.3 53.6 54.9 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 56.2 57.6 59.0 60.4 61.9 63.4 64.9 66.5 68.1 69.8 71.5 73.2 75.0 76.8 78.7 80.6 82.5 84.5 86.6 88.7 90.9 93.1 95.3 97.6 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 Letter Multiplier Cross Reference A =10 C = 1,000 E = 100,000 B = 100 D = 10,000 F = 1,000,000 0603 Code 01B 25C 93D Explanation 01 = 10.0 & B = 100 25 = 17.8 & C = 1,000 93 = 90.9 & D = 10,000 X=1 Y = 0.1 51B Value 10.0x100 = 1K Ω 17.8x1,000 = 17.8K Ω 90.9 x 10,000 = 909K Ω American Accurate Components, Inc. 188 Technology Drive Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 Email: sales@aacix.com 3 THICK FILM CHIP RESISTORS The content of this specification may change without notification 10/04/07 PACKAGE QUANTITY Type B M V Type B M V 01005 15,000 0201 10,000 40,000 1210 5,000 20,000 0402 10,000 40,000 0603 25,000 5,000 20,000 2010 4,000 20,000 0805 10,000 5,000 20,000 2512 4,000 20,000 TAPE Type Press Pocket Carrier Tape Rect. Punching Carrier Paper Tape Plastic (Embossed Tape) Resistor Size 01005 0201, 0402, 0603, 0805, 1206, 1210 2010 & 2512 1206 5,000 5,000 20,000 REEL DRAWINGS TAPE SCHEMATIC 7” Reel (M) 13” Reel (V) PACKAGE DIMENSIONS (mm) M H C G E F 7” Reel (M) 180 ± 3.0 1.20 13.0 ± 0.2 9.0 ± 0.3 60 ± 1.0 11.4 ± 1.0 13” Reel (V) 330±2.5 2.3± 0.5 13.0 ± 0.2 9.5 ± 0.5 80.0 ± 1.0 14.4 01005 Size A 0.38±0.02 P1 2.0±0.05 B 0.68±0.02 P0 4.0±0.10 W 8.0±0.10 D0 1.55±0.03 F 3.5±0.05 t1 0.42±0.05 t2 0.5 E 1.75±0.05 K 0.27±0.02 BULK CASE SCHEMATIC 0201 ~ 2512 Size TAPE DIMENSIONS (mm) A B W E F P1 T Tp 0201 0.41±0.1 0.71±0.1 8.0±0.2 1.75±0.10 3.5±0.05 2.0±0.05 0.5max 0.4+0.05 1206 2.0±0.15 3.6±0.15 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 0.90±0.1 0.75±0.1 0402 0.65±0.1 1.15±0.1 8.0±0.2 1.75±0.10 3.5±0.05 2.0±0.05 0.55±0.1 0.40±0.05 1210 2.9±0.1 3.5±0.1 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 0.90±0.1 0.75±0.1 0603 1.1±0.2 1.9±0.2 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 0.70±0.1 0.60±0.1 2010 2.9±0.1 5.3±0.1 12.0±0.2 1.75±0.1 5.5±0.05 4.0±0.1 1.0±0.1 0.25±0.1 0805 1.65±0.2 2.4±0.2 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 0.90±0.1 0.75±0.1 2512 3.4±0.1 6.6±0.1 12.0±0.2 1.75±0.1 5.5±0.05 4.0±0.1 1.0±0.1 0.25±0.1 BULK CASE DIMENSIONS (mm) A 110. 0± 0.7 F 6.8 ±0.1 B 36.0 ± 0.2 G H C 12.0 ± 0.1 I D 31.5 ±0.2 J 2.0± 0.1 E 36.0 ±0.2 K 4.7± 0.1 8.8 ±0.1 12.0 ± 0.1 1.5 ± 0.1 LABEL DESCRIPTION One side surface of a reel is marked with a label with the following items of information. 1. Chip Resistor 2. Part Number 3. Tolerance 4. Quantity 5. Lot number for production month/year/suffix L* 6. Manufacturer’s name or symbol * The suffix “L” indicates that this item is lead free. As of September 2004, all new production items of the series CR and CJ are no longer containing tin/lead (SnPb) terminals; they are lead free and in compliance with Lead Free/RoHS. A B W E F P1 T Tp American Accurate Components, Inc. 188 Technology Drive Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 Email: sales@aacix.com 4 THICK FILM CHIP RESISTORS The content of this specification may change without notification 10/04/07 CR-KITS Series, Thick Film Chip Resistor Engineering Kits This engineering and design kit is a great sales tool, allowing for application testing before ordering minimum quantities. AAC offers a wide assortment of popular chip resistors sizes and tolerances, in addition to a large quantity of each value. The kits are convenient with easy-to-use packaging. PACKAGE CONSTRUCTION 3 Ring Binder Case Holder Plastic pages with slip holders for each value Each value is individually identified in a slip holder Resistors are packaged on paper tape strips E-24 KIT VALUES 2.2 2.7 3.9 4.7 6.8 8.2 10 18 22 27 33 39 47 68 75 100 120 150 180 220 270 330 390 470 560 680 850 1.0K 1.2K 1.5K 1.8K 2.2K 2.7K 3.3K 3.9K 4.7K 5.6K 6.8K 8.2K 10K 12K 15K 18K 22K 27K 33K 39K 47K 56K 82K 100K 120K 150K 220K 270K 390K 470K 560K 1.0M 2.2M E-96 KIT VALUES 10.0 11.3 12.1 13.3 15.0 16.5 18.2 20.0 22.1 24.3 26.1 28.7 33.2 35.7 39.2 42.2 46.4 51.1 56.2 61.9 68.1 75.0 82.5 90.9 100 107 118 133 150 162 174 200 215 237 261 287 301 332 348 383 422 475 511 549 604 681 750 825 909 1.00K 1.10K 1.21K 1.33K 1.50K 1.62K 1.82K 2.00K 2.21K 2.37K 2.67K 3.01K 3.32K 3.92K 4.22K 4.75K 5.11K 5.62K 6.19K 6.81K 7.50K 8.25K 9.09K 10.0K 11.0K 12.1K 13.0K 15.0K 16.2K 18.2K 20.0K 22.1K 23.7K 27.4K 30.1K 33.2K 39.2K 41.2K 47.5K 49.9K 56.2K 60.4K 68.1K 75.0K 82.5K 90.9K 100K 110K 121K 130K 150K 162K 178K 200K 221K 237K 255K 274K 301K 332K 365K 392K 422K 464K 511K 536K 562K 619K 649K 681K 732K 750K 825K 866K 909K 953K 1.0M Engineering Kits J Type FEATURES EIA Standard E-24 Values Full range from 1 Ω ~ 1M Ω Resistance Tolerance of +5% 3,000 Pieces: 50 pieces of 60 different values ISO 9002 Quality Certified products Engineering Kits F Type FEATURES EIA Standard E-24 Values Full range from 10 Ω ~ 1M Ω Resistance Tolerance of +1% 3,150 Pieces: 25 pieces of 126 different values ISO 9002 Quality Certified products Part Number for +5% Sample Kit Part Number CR05-J-KITS Description 0402, 1/16w, 5%, E-24 values (1Ω through 2.2M Ω) 0603, 1/16w, 5%, E-24 values (1Ω through 2.2M Ω) 0805, 1/10w, 5%, E-24 values (1Ω through 2.2M Ω) 1206, 1/8w, 5%, E-24 values (1Ω through 2.2M Ω) Part Number for +1% Sample Kit Part Number CR05-F-KITS Description 0402, 1/16w, 1%, E-96 values (10 Ω through 1M Ω) 0603, 1/16w, 1%, E-96 values (10 Ω through 1M Ω) 0805, 1/10w, 1%, E-96 values (10 Ω through 1M Ω) 1206, 1/8w, 1%, E-96 values (10 Ω through 1M Ω) CR16-J-KITS CR16-F-KITS CR10-J-KITS CR10-F-KITS CR18-J-KITS CR18-F-KITS American Accurate Components, Inc. 188 Technology Drive, Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889