CSP3155-2400-G

Surface Mount Power Splitter/Combiner The content of this specification may change without notification 09/18/08 Chip Splitters / Combiners Dimensions a nd S chematics 2.0 (6) 1.6 (1) (5) (2) 3-0.7 3.2 P/N Marking Side CSP3157 4 (4) (3) 3-0.5 CSP3151, CSP3152, CSP3153, CSP3154, CSP3155 Chip Splitter / Combiner 3 OUT-2 IN 6-R0.15 C 5 1 R OUT-1 (1)Output Port-1 (2)NC (3)Output Port-2 (4)NC (5)Input Port (6)NC Chip Splitter / Combiner 3 2 1 OUT-2 R IN CSP3157 Unit : mm 5 6 OUT-1 (1)Output Port-1 (2)GND (3)Output Port-2 (4)GND (5)Input Port (6)GND C : M atching Capacitor R : Isolation Resistor O rder Information Style No. CSP3151-0900-G CSP3152-1500-G CSP3153-1700-G CSP3154-1900-G CSP3155-2100-G CSP3155-2400-G CSP3157-5800-G Frequency Range [ MHz ] 800~1000 1400~1600 1600~1800 1800~2000 2000~2200 2300~2500 5700~5900 *Insertion Loss [ dB ] 4.0 max. 4.0 max. 4.0 max. 4.0 max. 4.2 max. 4.2 max. 4.2 max. Nominal Impedance [Ω] 50 50 50 50 50 50 50 Power Balance [ dB ] 0.2 max. 0.2 max. 0.2 max. 0.2 max. 0.2 max. 0.2 max. 0.2 max. Isolation [ dB ] 15.0 min. 15.0 min. 13.0 min. 11.0 min. 13.0 min. 13.0 min. 15.0 min. VSWR Input [ dB ] 1.6 max. 1.5 max. 1.5 max. 1.6 max. 1.8 max. 1.8 max. 2.0 max. VSWR Output [ dB ] 1.3 max. 1.3 max. 1.3 max. 1.3 max. 2.0 max. 2.0 max. 2.0 max. Max. Input Power [W] 1.0 max. 1.0 max. 1.0 max. 1.0 max. 1.0 max. 1.0 max. 1.0 max. Matching Capacitor 3.00 pF 1.50 pF 1.25 pF 1.00 pF 1.00 pF 0.75 pF - Note Correspondence W-CDMA Correspondence ETC * Insertion loss : Including 3 dB Split loss ⋅ Test fixture : Teflon 0.8 mm ⋅ Operating Temperature Range : − 30~+85 C Recommendable F ootprint / E xternal M ounted P arts CSP3151~CSP3155 3-0.5 Matching Capacitor CSP3157 5.2 0.6 1.4 *Use s a 5 0 Ω m icr ostrip line for w id th o f i n pu t a nd ou tp u t p or t. 2−φ0.6 Through Hole 3-1.5 2.5 2.0 0.9 Chip Splitter / Combiner 3.9 1.5 Chip Splitter / Combiner 1.5 2.5 Isolation Resistor :100Ω φ0.4 Through Hole 1.4 2.6 Isolation Resistor :100Ω - Noticed The electrical characteristics are subject to be changed by the type of substrate, thickness, mounting conditions, wiring to the terminals of this coupler, ground position, and the alike, so that please confirm its performance inside the circuit. 6.5 0.8 Unit : mm American Accurate Components, Inc. 188 Technology Drive, Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 2.2