RN14R2E100KCM

RN 14 Series Insulation Coated Metal Film Resistors The content of this specification may change without notification 1/01/06 HOW TO ORDER: RN14 S 2E 100K B M Custom solutions are available. Packaging M = Tape ammo pack (1,000 pcs) B = Bulk (100 pcs) Resistance Tolerance C = +0.25% B = + 0.1% D = +0.5% F = +1.0% Resistance Value e.g. 100K, 62R2, 30K1 Voltage 2B = 1/8W, 2E = 1/4W, 2H = 1/2W Temperature Coefficient E = +25ppm R = +5ppm S = +10ppm C = +50ppm Series Precision Insulation Coated Metal Film Fixed Resistor FEATURES Ultra Stability of Resistance Value Extremely Low temperature coefficient of resistance, +5ppm Working Temperature of -55°C ~ +150°C Applicable Specifications: EIA575, JISC5202, and IEC 60068 ISO 9002 Quality Certified STANDARD ELECTRICAL SPECIFICATION Type RN14 2B RN14 2E RN14 2H Rated Watts* 0.125 0.25 0.50 Max. Working Voltage 250 350 500 Max. Overload Voltage 500 700 1000 Tolerance (%) +0.1 +0.25, +0.5, +1 +0.1 +0.25, +0.5, +1 +0.1 +0.25, +0.5, +1 TCR ppm/°C +5, +10, +25 +25, +50 +5, +10, +25 +25, +50 +5, +10, +25 +25, +50 Resistance Range 10 Ω – 1MΩ 10 Ω – 1MΩ 10 Ω – 1MΩ - 55 C to + 150 C Operating Temp Range * per element @ 85 C DIMENSIONS (mm) Type RN14 2B RN14 2E RN14 2H L 6.3 + 0.5 9.0 + 0.5 14.2 + 0.8 D 2.3 + 0.2 3.6 + 0.5 4.8 + 0.4 C 7.5 10.5 16.0 Test Item JISC5202 Test Result B (+0.1%) S (+10ppm/ C) + (0.25% + 0.05Ω) 10,000M Ω + (0.1% + 0.05Ω) + (0.5% + 0.05Ω) + (0.25% + 0.05Ω) + (0.25% + 0.05Ω) + (0.25% + 0.05Ω) 95% Anti-Solvent + (0.25% + 0.05Ω) + (0.25% + 0.05Ω) + (0.25% + 0.05Ω) + (0.25% + 0.05Ω) l 27 + 2 27 + 2 27 + 2 d 0.6 + 0.05 0.6 + 0.05 1.0 + 0.05 E l Value TRC Short Time Overload Insulation Voltage Intermittent Overload Terminal Strength 5.1 5.2 5.5 5.6 5.7 5.8 6.1 6.3 6.4 6.5 6.9 7.4 7.1 7.9 7.10 RESISTOR DRAWING Mechanic Vibration Solder Heat Solderability Solvency Temperature Cycle DERATING CURVE Other Low Temp Operation Humidity Overload Rated Load Test MATERIAL SPECIFICATION Element: Encapsulation: Core: Termination: Precision deposited nickel chrome alloy Coated constructions Specially formulated epoxy compounds Standard lead material is solder coated copper with controlled annealing Fire cleaned high purity ceramic Solderable and weldable per MIL-STD1276, Type C PERFORMANCE American Accurate Components, Inc. 188 Technology Drive, Unit H, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 1