RP3-1003AS

RP Ultra Stable Thin Film Resistor The content of this specification may change without notification 08/17/06 Custom solutions are available. HOW TO ORDER RP 21003 T R TCR (PPM/°C) P = +1.0 R = +5 Q = +2.5 S = +10 Resistance Tolerance T = +.01 A = +.05 E = +.025 B = +.10 Resistance Value 3 significant fig. & 1 multiplier Size 2 = 5.00 x 6.5mm 3 = 7.62 x 6.5 mm Series FEATURES Ultra Stable Thin Film Resistor Working temperature -50°C to +150°C Excellent to performance of absolute tolerance as .01% and absolute TCR at 1ppm Applicable Specifications: EIA575, CECC 40300, and MIL-R-55182E RESISTANCE RANGE Type RP2 TCR/ppmºC ±10 ±1, ±2.5, ±5, ±10 ±10 ±1, ±2.5, ±5, ±10 ±5, ±10 Resistance Ω 10.0 – 50.0 50.0 – 100K 10.0 – 50.0 50.0 – 200K 200K – 1.0M Tolerance % +0.10 +0.01, +0.05, +0.25, +0.10 +0.10 +0.01, +0.05, +0.25, +0.10 +0.05, +0.10 MECHANICAL SPECIFICATIONS Resistive Material Substrate Material Terminals Protection Nichrome Alumina SnPb on Cu Alloy Epoxy Coating RP3 MARKING 1003 = E= Resistance Value (Ω) Tolerance of ±0.025 TCR of ±2.5 STANDARD ELECTRICAL SPECIFICATIONS TEST Material Absolute TCR Tolerance Absolute RP2 RP3 RP2 Working Voltage (Max) RP3 RP2 Overload Voltage (Max) RP3 Operating Temp. Range Power Rating SPECIFICATION Passivated Nichrome ± 1.0ppm/ºC to ±10 ppm/ºC ± 0.01% to 0.10% 125mW 250mW 112 volts 250 volts 250 volts 500 volts -55ºC to +150ºC CONDITIONS 0ºC to +70ºC @ +70ºC @ +70ºC Q= SCHEMATIC DIMENSIONS (mm) Style RP2 RP3 L 5.00 Max 7.62 Max H 6.50 Max 6.50 Max I 3.0 ± 0.5 3.0 ± 0.5 P 2.54 ± 0.2 5.08 ± 0.2 W 2.5 Max 2.5 Max D 0.25+0.15-0.5 0.25+0.15-0.5 F 0.50+0.15-0.5 0.50+0.15-0.05 PERFORMANCE TEST Overload Temperature Cycling Terminal Strength Resistance to Solder Heat Vibration Climatic Sequence Moisture Load Life High Temp. Storage REQUIREMENTS MIL-R-55182E CECC 40300 ± 0.01% ± 0.05% ± 0.01% ± 0.01% ± 0.01% ± 0.01% ± 0.05% 2 Insulation Resistance > 10 MΩ ± 0.05% 2 Insulation Resistance > 10 MΩ ± 0.05% ± 0.05% ± 0.05% ± 0.02% ± 0.02% ± 0.02% --± 0.05% -Drifts Max. 0.01% 0.01% 0.01% ± 0.01% 0.01% 0.05% 0.02% 0.05% 0.05% CONDITIONS 2.5Un/5sec; U Max.