SRN65U100KEB

SRN Series Ultra Precision Molded Metal Film Resistors The content of this specification may change without notification 1/01/06 Custom solutions are available. HOW TO ORDER: SRN 55 S 100K B M Packaging M = Tape ammo pack (1,000) B = Bulk (100) Resistance Tolerance A = +0.05% T = + 0.01% E = +0.025% Resistance Value e.g. 100K, 62R2, 30K1 Temperature Coefficient (ppm) U = +3 R = +5 S = +10 Style/Length (mm) 55 = 6.6 65 = 16.0 60 = 10.5 65 = 20.0 Series Molded Metal Film Precision FEATURES High Stability and High Reliability Very low TCR: +3ppm/ C to +10ppm/ C Superior resistance tolerance: +0.01% to +0.05% Insulated constructions by epoxy molding Applicable Specifications: EIA 575, MIL-R-10509, and JISC 5722 DIMENSIONS (mm) Type SRN55 SRN60 SRN65 SRN70 L 6.6 + 0.5 10.5 + 0.5 16.0 + 0.5 20.0 + 0.5 D 3.4 + 0.2 3.9 + 0.2 5.3 + 0.3 7.0 + 0.5 l 38 + 3 38 + 3 38 + 3 38 + 3 d 0.6 + 0.05 0.6 + 0.05 0.6 + 0.05 0.8 + 0.05 SCHEMATIC STANDARD ELECTRICAL SPECIFICATION Series SRN55 Power Rating (Watts) @ 70°C 0.100 Voltage Max Working Max Overload 200 400 TCR (ppm/°C) +3 +5, +10 +3 +5 +10 +3 +5 +10 +3 +5 +10 Resistance Value Range (Ω) in Tolerance (%) +0.025% +0.050% +0.01% 100 ~ 100K 100 ~ 100K 100 ~ 100K 49.9 ~ 100K 49.9 ~ 100K 49.9 ~ 100K 100 ~ 100K 100 ~ 100K 100 ~ 100K 49.9 ~ 511K 49.9 ~ 511K 49.9 ~ 511K 49.9 ~ 511K 49.9 ~ 1.00M 49.9 ~ 1.00M 100 ~ 100K 100 ~ 100K 100 ~ 100K 49.9 ~ 511K 49.9 ~ 511K 49.9 ~ 511K 49.9 ~ 511K 49.9 ~ 1.00M 49.9 ~ 1.00M 100 ~ 100K 100 ~ 100K 100 ~ 100K 49.9 ~ 1.00M 49.9 ~ 1.00M 49.9 ~ 1.00M 49.9 ~ 1.00M 49.9 ~ 1.00M 49.9 ~ 3.52M SRN60 0.125 250 500 SRN65 0.250 300 600 SRN70 0.500 350 700 CHARACTERSTICS ITEM Operating Temperature Range Short Time Overload Insulation Resistance Dielectric withstanding Voltage Terminal Strength Vibration Resistance to Soldering Heat Low Temperature Operation Thermal Shock Moisture Resistance Moisture Resistance Load Life Load Life at 70°C TEST METHOD 2.5 X rated voltage; 5 seconds 100V or 500V; 1 minute SRN55, SRN60: 450V SRN65, SRN70: 900V } for 1 minute Pull 10 seconds; Twist 360°, 5 times SRN55, SRN60, SRN65: 10N and SRN70: 25N 10 to 2,000Hz, 1.5 mm or 20G, 2 directions; total 8 hours 350 ± 10°C, 3 seconds -65°C, rated voltage 45 minutes -65°C, -150°C for 5 cycles 65°C, 90 ~ 95% R.H. -10°C, 10 cycles 40°C, 90 ~ 95% R.H. rated voltage, 1,000 hours 70°C, rated voltage, 1.5 hours on, 0.5 hours off, 1,000 hours REQUIREMENTS -25°C to +125°C ± (0.05% + 0.01Ω) 100,000MΩ or more ± (0.05% + 0.01Ω) ± (0.02% + 0.01Ω) ± (0.05% + 0.01Ω) ± (0.05% + 0.01Ω) ± (0.05% + 0.01Ω) ± (0.05% + 0.01Ω) ± (0.2% + 0.01Ω) ± (0.2% + 0.01Ω) ± (0.2% + 0.01Ω) American Accurate Components, Inc. 188 Technology Drive, Suite H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 1