TSOP Series Ultra Precision Molded Resistor Networks
The content of this specification may change without notification 1/01/06 Custom solutions are available.
HOW TO ORDER TSOP 08 A 1003 B C
TCR (PPM/°C) R = +5 S = +10 E = +25 C = +50 Resistance Tolerance A = +.05 B = +.10 C = +.25 Resistance Value 3 sig. fig & 1 multiplier +1% Circuit Type/Pattern Refer to Circuit Schematic A, B, C, D, E Pins 8, 14,16, 20 Series Ultra Precision Molded Resistor
FEATURES
TSOP High Precision NiCr Thin Film Resistor Networks with tight ratio and tracking 10 Standard Circuits Excellent to relative Tolerance and TCR High Stability Thin Film 2.3mm High from PC Board, most fit for high density compacted instruments. Custom Circuit Configuration is Available
ELECTRICAL SPECIFACTIONS
Rated Power per Resistor at 70ºC Maximum Working Voltage Maximum Overload Voltage Absolute TCR ppm/ºC Absolute Tolerance % 60mW 75V 150V 50, 25,10, 5 0.25, 0.1, 0.05
MECHANICAL SPECIFACTIONS
Mechanical Protection Resistive Element Terminal Leads Epoxy Molded NiCr Film Tinned
TYPICAL PERFORMANCE
T C R ABS ± 5ppm ± 10ppm ± 25ppm ± 50ppm O L ABS ± 0.05% ± 0.10% ± 0.25% TRACKING 1, 2, 3, 5 1, 2, 3, 5, 10 1, 2, 3, 5, 10 1, 2, 3, 5, 10 RATIO 0.025, 0.05, 0.1 0.025, 0.05, 0.1, 0.2 0.025, 0.05, 0.1, 0.25, 0.5
TSOP 08 SCHEMATIC
TSOP 08
TSOP 16
DIMENSIONS (mm)
Model TSOP 08 TSOP 16 A 5.5 ± 0.3 10.5 ± 0.5 B 5.3 ± 0.3 5.3 ± 0.3 C 2.3 max 2.3 max D 8.0 ± 0.2 8.0 ± 0.2 E 1.27 ± 0.2 1.27 ± 0.2 F 0.4 ± 0.05 0.4 ± 0.05 G 0.2 ± 0.1 0.2 ± 0.1 H 0.3 min 0.3 min
American Accurate Components, Inc.
188 Technology Drive, Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889
1
TSOP Series Ultra Precision Molded Resistor Networks
The content of this specification may change without notification 1/01/06
CIRCUIT SPECIFICATION
Circuit Symbol A B C D E
TSOP 08 Circuit Layout Options
Resistance Range (Ω)
50.0 ~ 22.0K
50.0 ~ 10.0K
50.0 ~ 22.0K
50.0 ~ 22K
500 ~ 10.0K
CIRCUIT SPECIFICATION – 16 PINS
Circuit Symbol A B C
TSOP 16 Circuit Layout Options
Resistance Range (Ω)
50.0 ~ 22.0K
50.0 ~ 10.0K
50.0 ~ 22.0K
Circuit Symbol
D
E
TSOP 16 Circuit Layout Options
Resistance Range (Ω)
50.0 ~ 22K
500 ~ 10.0K
PERFORMANCE
TEST Operating Temperature Range Short Time Overload Temperature Cycle Resistance to Solder Heat Moisture Resistance Load Life Load Life at 70°C 2.5 x rated voltage for 5 seconds -55ºC ~ 155ºC for 5 cycles 250ºC for 10 seconds 40°C, 90 ~ 95% R.H. rated voltage, 1,000 hours 70°C, rated voltage, 1.5 hours on, 0.5 hours off, 1,000 hours TEST METHOD REQUIREMENTS -55ºC ~ 155ºC ± (0.02% + 0.01Ω) ± (0.02% + 0.01Ω) ± (0.02% + 0.01Ω) ± (0.02% + 0.01Ω) ± (0.02% + 0.01Ω)
American Accurate Components, Inc.
188 Technology Drive, Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889
2
