0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
AAT3169ISN-T1

AAT3169ISN-T1

  • 厂商:

    AAT(类比)

  • 封装:

  • 描述:

    AAT3169ISN-T1 - High Efficiency 1X/1.5X/2X Charge Pump for White LED Applications - Advanced Analog ...

  • 详情介绍
  • 数据手册
  • 价格&库存
AAT3169ISN-T1 数据手册
High Efficiency 1X/1.5X/2X Charge Pump for White LED Applications General Description The AAT3169 is a low noise, constant frequency charge pump DC/DC converter that uses a tri-mode load switch (1X), fractional (1.5X), and doubling (2X) conversion to maximize efficiency for white LED applications. The AAT3169 is capable of driving six LEDs for a total of 180mA from a 2.7V to 5.5V input. The current sinks may be operated individually or in parallel for driving higher current LEDs. A low external parts count (two 1µF flying capacitors and two small 1µF capacitors at IN and OUTCP) make this part ideally suited for small, battery-powered applications. AnalogicTech's AS2Cwire™ (Advanced Simple Serial Control™) serial digital input is used to enable, disable, and set current for each LED with a 16-level logarithmic scale plus four low-current settings down to 115µA. For optimized efficiency, low-current settings require only 65µA of housekeeping current. Each output of the AAT3169 is equipped with builtin protection for output short-circuit and auto-disable for load short-circuit conditions. Built-in softstart circuitry prevents excessive inrush current during start-up. A low-current shutdown feature disconnects the load from the input and reduces quiescent current to less than 1µA. The AAT3169 is available in a Pb-free, space-saving, thermally-enhanced 16-pin 4x4mm QFN package or a low-profile 14-pin 3x3mm STDFN package and is rated over the -40°C to +85°C temperature range. AAT3169 Features • • ChargePump™ • • • • • • • • • • • VIN Range: 2.7V to 5.5V Fully Programmable Current with Single Wire — 16-Step Logarithmic Scale — 15/20/30mA Max Current — Four Low-Current Settings Down to 115µA — Low IQ (65µA) for Single-Channel, LowCurrent Mode Tri-Mode 1X, 1.5X, and 2X Charge Pump for Maximum Efficiency and VF Coverage Drives Up to Six LEDs Individual Main-Sub (5-1) Group Control No Inductors, Low Noise Operation 1MHz Constant Switching Frequency Small Application Circuit Built-In Thermal Protection Built-In Auto-Disable for Open Circuit Automatic Soft Start IQ
AAT3169ISN-T1
1. 物料型号: - AAT3169:高效率1X/1.5X/2X电荷泵,适用于白光LED应用。

2. 器件简介: - AAT3169是一款低噪声、恒定频率的电荷泵DC/DC转换器,使用三模负载开关(1X)、分数(1.5X)和倍增(2X)转换来最大化白光LED应用的效率。该器件能够在2.7V至5.5V的输入下驱动六个LED,总电流为180mA。电流汇可以单独操作或并行驱动以驱动更高电流的LED。

3. 引脚分配: - 1-2: D6:第六个电流汇输入。 - 3: EN/SET:AS2Cwire串行接口控制引脚。 - 4-6: OUTCP、C2+、C1+、C1-、C2-:电荷泵输出及电容连接引脚。 - 9-11: GND:地线。 - 12-16: D1-D5:第一至第五个电流汇输入。

4. 参数特性: - 输入电压范围:2.7V至5.5V。 - 输出电流:最大210mA。 - 工作结温范围:-40°C至150°C。 - 最大功耗:QFN44-164为2.0W,STDFN33-14为1.5W。 - 最大热阻:QFN44-16为50°CW,STDFN33-14为40°CW。

5. 功能详解: - AAT3169具有内置的短路保护和自动禁用功能,以应对负载短路情况。软启动电路可防止启动时电流突波。在关闭状态下,负载与输入断开,静态电流降至小于1µA。 - 通过AS2Cwire串行接口,可以独立控制每组电流汇输入的使能、禁用和设置电流。

6. 应用信息: - 适用于RGB照明、可编程电流汇、透射式显示、白光LED背光和数字相机的白光照片闪光灯等应用。

7. 封装信息: - 提供Pb-free的16引脚4x4mm QFN封装或14引脚3x3mm STDFN封装,适用于-40°C至+85°C的温度范围。
AAT3169ISN-T1 价格&库存

很抱歉,暂时无法提供与“AAT3169ISN-T1”相匹配的价格&库存,您可以联系我们找货

免费人工找货