0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
AAT4298

AAT4298

  • 厂商:

    AAT

  • 封装:

  • 描述:

    AAT4298 - Five/Six Channel Push/Pull I/O Expander - Advanced Analog Technology, Inc.

  • 数据手册
  • 价格&库存
AAT4298 数据手册
Five/Six Channel Push/Pull I/O Expander General Description The AAT4296/98 SmartSwitch is a member of AnalogicTech's Application Specific Power MOSFET™ (ASPM™) product family. The AAT4296/98 is comprised of five/six push/pull output switches that gate each respective output between a common input supply and ground. This device is targeted for I/O expansion applications, but can also be used for a combination of general purposes to simplify power switching with an off state load discharge. The AAT4296/98 operates over an input voltage range of 1.8V to 5.5V, making it ideal for batterypowered applications. The state of each output channel is controlled with a single GPIO via the EN/SET pin using AnalogicTech's Simple Serial Control™ (S2Cwire™) interface. When EN/SET is pulled to logic high, the device is enabled and consumes 3µA of typical quiescent current. In the off state, each output is pulled low to ground to affect a logic low state for I/O expander or power switching applications; this circuit will act as a load discharge function to rapidly turn off a load circuit. Rated over the -40°C to +85°C temperature range, the AAT4296 is offered in a Pb-free 8-pin SC70JW package, and the AAT4298 is offered in both a Pbfree 10-pin SC70JW and a Pb-free 12-pin TSOPJW package. AAT4296/98 Features • • • • • • • • SmartSwitch™ VIN Range: 1.8V to 5.5V Independent Push/Pull Channels — AAT4296: Five Channels — AAT4298: Six Channels User-Programmable Interface Single GPIO Controls State of Each Output Optional Fast Auto-Discharge Low Quiescent Current: 3µA Typical Temperature Range: -40°C to +85°C Available in Pb-Free Packages: — AAT4296: 8-Pin SC70JW — AAT4298: 10-Pin SC70JW and 12-Pin TSOPJW Applications • • • • Cell Phones Multiple Low Power Switching Personal Communication Devices Portable Electronic Devices Typical Application VCC Input VCC OUT1 OUT2 OUT 1 OUT 2 OUT 3 OUT 4 OUT 5 OUT 6 AAT4298 OUT3 OUT4 OUT5 EN/SET Input EN/SET GND OUT6 4296.2006.12.1.3 1 Five/Six Channel Push/Pull I/O Expander Pin Descriptions Pin # AAT4296 AAT4298 SC70JW-10 AAT4298 TSOPJW-12 AAT4296/98 Symbol VCC OUT2 OUT1 EN/SET Function Input supply voltage. Channel 2 output pin. Channel 1 output pin. Input control pin using S2Cwire serial interface. The device records rising edges of the clock and decodes them into 32 (AAT4296) or 64 (AAT4298) states controlling the ON/OFF states of the outputs. See Table 1 for output settings. In addition, a logic low forces the device into shutdown mode, reducing the supply current to less than 1µA. This pin should not be left floating. Ground. Channel 5 output pin. Channel 4 output pin. Channel 3 output pin. Channel 6 output pin. Not connected. 1 2 3 4 7 8 9 10 8 9 10 11 5 6 7 8 N/A N/A 1 3 4 5 6 2 2 3 4 5 7 1, 6, 12 GND OUT5 OUT4 OUT3 OUT6 N/C Pin Configuration AAT4296 SC70JW-8 (Top View) AAT4298 SC70JW-10 (Top View) AAT4298 TSOPJW-12 (Top View) VCC OUT2 OUT1 EN/SET 1 2 3 4 8 7 6 5 OUT3 OUT4 OUT5 GND GND N/C OUT5 OUT4 OUT3 1 2 3 4 5 10 9 8 7 6 EN/SET OUT1 OUT2 VCC OUT6 N/C GND OUT5 OUT4 OUT3 N/C 1 2 3 4 5 6 12 11 10 9 8 7 N/C EN/SET OUT1 OUT2 VCC OUT6 2 4296.2006.12.1.3 Five/Six Channel Push/Pull I/O Expander Absolute Maximum Ratings1 Symbol VCC to GND OUTx to GND EN/SET TJ AAT4296/98 Description Input to GND Output (Source) to GND EN/SET to GND Operating Junction Temperature Range Value -0.3 to 6.0 -0.3 to VIN + 0.3 -0.3 to 6.0 -40 to +150 Units V V V °C Thermal Information Symbol θJA PD Description Thermal Resistance2 Maximum Power Dissipation3 SC70JW-8, SC70JW-10 TSOPJW-12 SC70JW-8, SC70JW-10 TSOPJW-12 Value 225 160 440 625 Units °C/W mW 1. Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the device. Functional operation at conditions other than the operating conditions specified is not implied. Only one Absolute Maximum Rating should be applied at any one time. 2. Mounted on an FR4 board. 3. Derate 4.4mW/°C above 25°C. 4296.2006.12.1.3 3 Five/Six Channel Push/Pull I/O Expander Electrical Characteristics1 VCC = 5.0V; TA = -40°C to +85°C, unless otherwise noted. Typical values are TA = 25°C. Symbol VCC IQ AAT4296/98 Description Supply Voltage Range Quiescent Current Conditions EN/SET = VCC = 5V, IOUT = 0, All Switches ON EN/SET = GND, VCC = 5V, OUTx = Open VCC = 5V VCC = 3.6V VCC = 5V VCC = 3.6V Min 1.8 Typ 3.0 Max 5.5 10 1.0 Units V µA On Resistance P-Channel RDS(ON) On Resistance N-Channel TCRDS TON TOFF EN/SET VEN(L) VEN(H) TEN/SET LO TEN/SET_HI_MIN TEN/SET_HI_MAX TOFF TLAT IEN/SET On Resistance Temperature Coefficient Output Turn-On Time2 Output Turn-Off Time3 Enable Threshold Low Enable Threshold High EN/SET Low Time Minimum EN/SET High Time Maximum EN/SET High Time EN/SET Off Timeout EN/SET Latch Timeout EN/SET Input Leakage 2.5 3.0 1.9 2.0 2800 6.0 7.0 6.0 7.0 Ω ppm/°C 2.7 2.1 0.4 µs µs V V µs ns µs µs µs µA VCC = 5V, COUT = 100nF; TA = 25°C VCC = 5V, COUT = 100nF; TA = 25°C VIN = 1.8V VIN = 5.5V 1.6 0.8 1.4 0.5 50 75 75 500 500 1 -1 1. The AAT4296/98 is guaranteed to meet performance specifications over the -40°C to +85°C operating temperature range and is assured by design, characterization, and correlation with statistical process controls. 2. TON is the time after latch timeout to 90% of the output voltage. See Figure 1. 3. TOFF is the time after off timeout to 10% of the output voltage. See Figure 1. 4 4296.2006.12.1.3 Five/Six Channel Push/Pull I/O Expander Typical Characteristics Unless otherwise noted, VIN = 5V, CIN = 1µF, COUTx = 0.1µF, TA = 25°C. AAT4296/98 Quiescent Current vs. Input Voltage 3.5 3.5 Quiescent Current vs. Temperature Quiescent Current (μA) Quiescent Current (μA) 3.0 2.5 2.0 1.5 1.0 0.5 0.0 1.5 3.0 2.5 2.0 1.5 1.0 0.5 -40 85°C VCC = 5.0V 25°C -40°C VCC = 3.6V 2 2.5 3 3.5 4 4.5 5 5.5 -20 0 20 40 60 80 100 Input Voltage (V) Temperature (°C) VIH vs. Input Voltage 1.2 1.1 1.0 1.0 0.9 0.8 VIL vs. Input Voltage -40°C -40°C VIH (V) 0.9 0.8 0.7 0.6 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 VIL (V) 0.7 0.6 85°C 25°C 25°C 0.5 0.4 1.5 2.0 2.5 3.0 3.5 4.0 85°C 4.5 5.0 5.5 Input Voltage (V) Input Voltage (V) P-Channel RDS(ON) vs. Input Voltage (ILOAD = 100mA) 25 20 3.3 3.1 P-Channel RDS(ON) vs. Temperature (ILOAD = 100mA) RDS(ON) (Ω) RDS(ON) (Ω) 2.9 2.7 2.5 2.3 2.1 1.9 RDS6 RDS3 RDS1 RDS2 RDS5 RDS4 15 10 5 0 RDS2 RDS3 RDS6 RDS5 RDS4 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 RDS1 1.7 -40 -20 0 20 40 60 80 100 Input Voltage (V) Temperature (°C) 4296.2006.12.1.3 5 Five/Six Channel Push/Pull I/O Expander Typical Characteristics Unless otherwise noted, VIN = 5V, CIN = 1µF, COUTx = 0.1µF, TA = 25°C. AAT4296/98 N-Channel RDS(ON) vs. Input Voltage (ILOAD = 100mA) 4.0 3.5 2.9 2.6 N-Channel RDS(ON) vs. Temperature (ILOAD = 100mA) RDS(ON) (Ω) 3.0 2.5 2.0 1.5 1.0 1.5 2.0 RDS(ON) (Ω) RDS6 RDS3 RDS4 2.3 2.0 1.7 1.4 RDS6 RDS3 RDS4 RDS5 RDS2 2.5 RDS1 3.0 3.5 4.0 4.5 5.0 5.5 1.1 0.8 -40 -20 RDS5 0 RDS2 20 40 RDS1 60 80 100 Input Voltage (V) Temperature (°C) P-Channel RDS(ON) vs. Temperature (VCC = 3.6V; ILOAD = 100mA) 4.0 3.7 3.5 N-Channel RDS(ON) vs. Temperature (VCC = 3.6V; ILOAD = 100mA) RDS4 RDS(ON) (Ω) 3.4 3.1 2.8 2.5 2.2 -40 -20 RDS3 RDS(ON) (Ω) RDS6 RDS5 RDS4 3.0 2.5 2.0 1.5 1.0 0.5 0.0 RDS6 RDS3 RDS1 RDS2 RDS5 RDS2 RDS1 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 Temperature (°C) Temperature (°C) EN/SET Latch Timeout vs. Temperature 350 EN/SET Off Timeout vs. Temperature 350 Latch Timeout, TLAT (µs) Off Timeout, TOFF (μs) 300 250 200 150 100 50 -40 -20 0 20 40 60 80 100 300 250 200 150 100 50 -40 -20 0 20 40 60 80 100 VCC = 5.0V VCC = 5.0V VCC = 3.3V VCC = 1.8V VCC = 3.3V VCC = 1.8V Temperature (°C) Temperature (°C) 6 4296.2006.12.1.3 Five/Six Channel Push/Pull I/O Expander Typical Characteristics Unless otherwise noted, VIN = 5V, CIN = 1µF, COUTx = 0.1µF, TA = 25°C. EN/SET Timeout vs. Input Voltage 290 260 AAT4296/98 Turn-On and Turn-Off Time vs. Temperature 2.0 1.6 TLATCH Timeout (μs) 200 170 140 110 80 1.5 2 2.5 3 3.5 4 4.5 TOFF Time (μs) 230 TON (Rise Time) 1.2 0.8 0.4 0.0 -40 TOFF (Fall Time) 5 5.5 -20 0 20 40 60 80 100 Input Voltage (V) Temperature (°C) (RLOAD1 = RLOAD2 = 100Ω; COUT1 = COUT2 = 0.1μF) Turn-On Characteristic (RLOAD1 = RLOAD2 = 100Ω; COUT1 = COUT2 = 0.1μF) Turn-On Characteristic EN/SET (5V/div) VOUT1 (5V/div) VOUT2 (5V/div) 5V 0V 5V 0V 5V 0V EN/SET (5V/div) VOUT1 (5V/div) VOUT2 (5V/div) 5V 0V 5V 0V 5V 0V Time (50μs/div) Time (50μs/div) (RLOAD1 = RLOAD2 = 100Ω; COUT1 = COUT2 = 0.1μF) Turn-On Characteristic (RLOAD1 = RLOAD2 = 100Ω; COUT1 = COUT2 = 0.1μF) Turn-On Characteristic EN/SET (5V/div) VOUT1 (5V/div) VOUT2 (5V/div) 5V 0V 5V 0V 5V 0V EN/SET (5V/div) VOUT1 (5V/div) VOUT2 (5V/div) 5V 0V 5V 0V 5V 0V Time (50μs/div) Time (50μs/div) 4296.2006.12.1.3 7 Five/Six Channel Push/Pull I/O Expander Typical Characteristics Unless otherwise noted, VIN = 5V, CIN = 1µF, COUTx = 0.1µF, TA = 25°C. (RLOAD1 = RLOAD2 = 100Ω; COUT1 = COUT2 = 0.1μF) AAT4296/98 Turn-Off Characteristic (RLOAD1 = RLOAD2 = 100Ω; COUT1 = COUT2 = 0.1µF) Transition of Outputs EN/SET (5V/div) VOUT1 (5V/div) VOUT2 (5V/div) 5V 0V 5V 0V 5V 0V EN/SET (5V/div) VOUT1 (5V/div) VOUT2 (5V/div) 5V 0V 5V 0V 5V 0V Time (50μs/div) Time (50µs/div) (RLOAD1 = RLOAD2 = 100Ω; COUT1 = COUT2 = 0.1µF) Turn-On Transient Characteristic EN/SET (5V/div) VOUT1 (5V/div) VOUT2 (100mV/div, AC coupled) 5V 0V 5V 0V 5V Time (50µs/div) 8 4296.2006.12.1.3 Five/Six Channel Push/Pull I/O Expander Functional Block Diagram VCC AAT4296/98 AAT4298 OUT1 EN/SET S2Cwire Serial Interface OUT2 OUT3 OUT4 OUT5 OUT6 GND Functional Description The AAT4296/98 is comprised of five/six push/pull output slew rate limited load switches primarily targeted for microcontroller general purpose input/output (I/O) expansion applications. Each push/pull output is supplied by the common VCC input and is controlled via the digital EN/SET input pin. When a given output is enabled, the voltage source applied to the VCC pin is then switched to the respective output. The high-side P-channel MOSFET transistor has a typical on resistance (RDS(ON)) of 3Ω when operating from a 3.6V supply. When a respective output is disabled or turned off, the given output pin is then connected to ground through a low side N-channel MOSFET with a typical on resistance (RDS(ON)) of 2Ω. This circuit architecture affects a simple logic control with the high level based on the applied VCC. For the AAT4296, this creates a 1-to-5 I/O expander, and for the AAT4298 this creates a 1-to-6 I/O expander. Both the AAT4296 and AAT4298 have been designed to operate with an input voltage range of 1.8V to 5.5V, making them ideal for battery-powered applications. 4296.2006.12.1.3 9 Five/Six Channel Push/Pull I/O Expander These devices may also be used for load switching applications, as well as I/O expansion. Since the VCC is gated to each output through a slew rate limited low on-resistance switch, they are ideal for controlling applications circuits with light load current requirements. Such applications could include simple LED function indicator lamps, RGB LED fashion lighting, audio and RF circuits, or any other system with a power requirement that does not exceed the thermal dissipation limits of the load switch and device package. Each device push/pull output may be represented by the following circuit and simplified equivalent model (Figures 1 and 2): VCC AAT4296/98 Control OUT The state of each output is controlled via the EN/SET pin using AnalogicTech's S2Cwire interface. To enable a respective switch, a series of clocked pulses should be applied to the EN/SET pin. The number of pulses clocked will determine the switch configuration based on the truth table shown in Table 1. At the end of the serial pulse data set, the EN/SET set pin should be held high to then latch the clocked data and enable the desired switch configuration. When the device is enabled with the EN/SET held to a logic high state, the device quiescent current consumption will typically increase to 3µA and normal ambient room temperatures. If output sequencing of the switches is not necessary, all of the outputs will be switched on simultaneously on the first rising edge of the EN/SET pin by simply pulling the EN/SET to a logic high level. The default switch position for one clock pulse is all switches "on." However, if output sequencing is desired, a series of pulses on the EN/SET pin will set the outputs to the desired state (refer to Table 1 for output settings). The AAT4296/98 offers two different options when the switches are in the off state. For applications with an active pull down or auto-discharge requirement, the internal N-channel switch will connect the output node to ground with a series resistance of 2Ω. Figure 1: Push/Pull Output Circuit. VCC S2Cwire Serial Interface The ON/OFF state of the output is controlled by the EN/SET serial data input. An internal control counter is clocked on the rising edge of the EN/SET pin and is decoded into the 32/64 possible states (see Table 1). OUT 3Ω Control 2Ω Figure 2: Simplified Equivalent Model. 10 4296.2006.12.1.3 Five/Six Channel Push/Pull I/O Expander AAT4298 AAT4296 (only) AAT4296/98 AAT4298 Clock 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 Clock OUT6 OUT5 OUT4 OUT3 OUT2 OUT1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 on on on on on on on on on on on on on on on on on on on on on on on on on on on on on on on on on on on on on on on on on on on on on on on on off off off off off off off off off off off off off off off off on on on on on on on on off off off off off off off off on on on on on on on on off off off off off off off off on on on on off off off off on on on on off off off off on on on on off off off off on on on on off off off off on on off off on on off off on on off off on on off off on on off off on on off off on on off off on on off off on off on off on off on off on off on off on off on off on off on off on off on off on off on off on off on off OUT6 OUT5 OUT4 OUT3 OUT2 OUT1 off off off off off off off off off off off off off off off off off off off off off off off off off off off off off off off off on on on on on on on on on on on on on on on on off off off off off off off off off off off off off off off off on on on on on on on on off off off off off off off off on on on on on on on on off off off off off off off off on on on on off off off off on on on on off off off off on on on on off off off off on on on on off off off off on on off off on on off off on on off off on on off off on on off off on on off off on on off off on on off off on off on off on off on off on off on off on off on off on off on off on off on off on off on off on off on off Table 1: Output Settings. 4296.2006.12.1.3 11 Five/Six Channel Push/Pull I/O Expander The S2Cwire interface relies on the number of rising edges of the EN/SET pin to address and load the registers. S2Cwire latches data or address after the EN/SET pin has been held high for time TLAT. The interface records rising edges of the EN/SET pin and decodes them into 32 (for AAT4296) or 64 (for AAT4298) different states, as indicated in Table 1. There are 32 (for AAT4296)/ 64 (for AAT4298) different sequences for controlling individual turn-on/turn-off of each switch. The counter can be clocked at speeds up to 1MHz, such that intermediate states are not visible. Alternatively, the EN/SET clock pulses may be entered one at a time for desired setting. The first rising edge of EN/SET enables the IC and turns all the switches ON. Once the final clock cycle is received, the EN/SET pin is held high to maintain the device setting. The device is disabled 500µs (TOFF) after the EN/SET pin transitions to a logic low state. AAT4296/98 OUTn TH EN/SET TL TLAT TON TO TOFF Figure 3: Timing Diagram. Applications Information The AAT4296 and AAT4298 have been designed so that no external parts are required for the device to function as a general purpose I/O expander. Such external parts could include bypass capacitors, or pull-up or pull-down resistors. For applications which may use some or all of the output to switch light load current levels to application circuits, good engineering practice would dictate the use of small bypass capacitors place on the VCC input and each output which is being used to conduct current to a load. The use of small ceramic capacitors between the input and output nodes to ground will aid in reducing line and load transient response effects. Refer to the application schematic of Figure 4 for an example for placing bypass capacitors. CIN should be located as close to the device VIN pin as practically possible. There is no specific capacitor equivalent series resistance (ESR) requirement for CIN; however, for higher current operation, ceramic capacitors are recommended for CIN due to their inherent capability over tantalum or aluminum electrolytic capacitors to withstand input current surges from low impedance sources, such as batteries in portable devices. Output Capacitor For typical applications where the AAT4696/98 is used for I/O expansion, no output capacitors are required. Many other common applications such as controlling LED indicator lamps in portable products do not require an output capacitor because the end load is not sensitive to device turn-on transient effects. For improved load transient response in systems using the AAT4296/98 for load switching, the addition of a small output capacitor placed between the output pins and ground can have a beneficial effect. A 0.1µF ceramic capacitor is suggested as a reasonable value for an output capacitor. Please refer to Figure 4. Input Capacitor Typically a 0.1µF to 1µF capacitor is recommended for CIN in most applications. A CIN capacitor is not required for basic operation; however, CIN is useful in preventing load transient effects from affecting upstream circuits when internal switches are enabled to their respective output load circuits. 12 4296.2006.12.1.3 Five/Six Channel Push/Pull I/O Expander The output capacitor has no specific capacitor type or ESR requirement. If desired, COUT may be increased to a value greater than 0.1µF without limit to accommodate any load transient condition without adversely affecting the device turn-on slew rate time. Constants for the AAT4296 and AAT4298 are maximum junction temperature, TJ(MAX) = 125°C, and package thermal resistance, θJA = 120°C/W. Worstcase conditions are calculated at the maximum operating temperature, where TA = 85°C. Typical conditions are calculated under normal ambient conditions, where TA = 25°C. At 25°C ambient, the AAT4296 is capable of dissipating 440mW of power. If all five channels have 5.0V output, the average current is 121mA per channel. The AAT4298 is capable of dissipating 625mW of power. If all six channels have 5.0V output, the average current is 131.5mA per channel. At 85°C ambient, the AAT4296 is capable of dissipating 177.78mW of power. If all five channels have 5.0V output, the average current is 76.5mA per channel. The AAT4298 is capable of dissipating 250mW of power. If all six channels have 5.0V output, the average current is 83mA per channel. AAT4296/98 Thermal Considerations The AAT4296 and AAT4298 are designed to deliver continuous output load currents. The limiting characteristic for maximum safe operating output load current is package power dissipation. In order to obtain high operating currents, careful device layout and circuit operating conditions need to be taken into account. At any given ambient temperature (TA), the maximum package power dissipation can be determined by the following equation: TJ(MAX) - TA θJA PD(MAX) = Applications Circuit VCC Input VCC OUT1 OUT2 OUT 1 OUT 2 OUT 3 OUT 4 OUT 5 OUT 6 AAT4298 OUT3 OUT4 OUT5 EN/SET Input EN/SET GND C1* C2* C3* C4* C5* C6* OUT6 Figure 4: Typical Application Diagram. *Use of capacitors on each output is optional. 4296.2006.12.1.3 13 Five/Six Channel Push/Pull I/O Expander Driving LED Loads The AAT4296 and AAT4298 can be used to drive LEDs or other applications with light load current requirements. LED applications may include main and sub-LCD display backlighting, camera photoflash applications, color (RGB) LEDs, and infrared (IR) diodes for remotes. In series with LEDs, ballast resistors must be used to limit the LED current. The LED current will vary with supply voltage and LED forward voltage. Most types of LEDs have forward voltage specifications ranging from 2.0V to 5.0V. Calculate the necessary ballast resistor value from the following formula: (VIN - VF) - RDS(ON) ILED AAT4296/98 RLED = Where: RLED is the resistance of resistor to be placed in series with the LED (Ω). VIN is the input supply voltage to the device (V). VF is the forward voltage of the LED (V). RDS(ON) is the resistance of the switch when it is turned on (Ω). ILED is the desired operating current of the LED (A). 5V AAT4296 IN OUT1 OUT2 OUT3 OUT4 EN Bluetooth Device EN Infrared Device A series of pulses EN/SET GND OUT5 OUT6 Backlighting R G B Figure 5: Infrared, Bluetooth, RGB, and Backlighting Control. 14 4296.2006.12.1.3 Five/Six Channel Push/Pull I/O Expander AAT4296 Low Dropout Voltage Regulator IN OUT1 OUT2 OUT3 OUT4 AAT4296/98 VIN Circuit 1 30mA GPIO 1 EN/SET OUT5 VIN Circuit 2 30mA System µController VIN Circuit 3 30mA GPIO 2 GPIO 3 GPIO 4 GPIO 5 GPIO 2 to GPIO 5 are now free for other uses VIN Circuit 4 30mA VIN Circuit 5 30mA Figure 6: GPIO I/O Expander (Condense Five GPIO Control Lines to One Using AAT4296). 4296.2006.12.1.3 15 Five/Six Channel Push/Pull I/O Expander Ordering Information Package SC70JW-8 SC70JW-10 TSOPJW-12 AAT4296/98 Marking1 QIXYY QEXYY Part Number (Tape and Reel)2 AAT4296IJS-T1 AAT4298IJQ-T1 AAT4298ITP-T1 All AnalogicTech products are offered in Pb-free packaging. The term “Pb-free” means semiconductor products that are in compliance with current RoHS standards, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. For more information, please visit our website at http://www.analogictech.com/pbfree. Package Information 0.50 BSC 0.50 BSC 0.50 BSC SC70JW-8 1.75 ± 0.10 0.225 ± 0.075 2.00 ± 0.20 2.20 ± 0.20 0.048REF 0.85 ± 0.15 1.10 MAX 0.15 ± 0.05 0.100 7 ° ± 3° 0.45 ± 0.10 2.10 ± 0.30 4° ± 4° All dimensions in millimeters. 1. XYY = assembly and date code. 2. Sample stock is generally held on part numbers listed in BOLD. 16 0.05 ± 0.05 4296.2006.12.1.3 Five/Six Channel Push/Pull I/O Expander SC70JW-10 0.40 BSC AAT4296/98 1.75 ± 0.10 0.225 ± 0.075 Top View 2.00 ± 0.20 2.20 ± 0.20 0.85 ± 0.15 1.10 MAX 0.15 ± 0.05 0.100 0.45 ± 0.10 2.10 ± 0.30 4° ± 4° 7 ° ± 3° Side View All dimensions in millimeters. End View 0.05 ± 0.05 4296.2006.12.1.3 17 Five/Six Channel Push/Pull I/O Expander TSOPJW-12 + 0.10 - 0.05 AAT4296/98 0.20 2.40 ± 0.10 0.50 BSC 0.50 BSC 0.50 BSC 0.50 BSC 0.50 BSC 2.85 ± 0.20 7° NOM 3.00 ± 0.10 0.9625 ± 0.0375 0.04 REF + 0.10 1.00 - 0.065 0.055 ± 0.045 4° ± 4° 0.010 0.15 ± 0.05 0.45 ± 0.15 2.75 ± 0.25 All dimensions in millimeters. AnalogicTech cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in an AnalogicTech product. No circuit patent licenses, copyrights, mask work rights, or other intellectual property rights are implied. AnalogicTech reserves the right to make changes to their products or specifications or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. AnalogicTech warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with AnalogicTech’s standard warranty. Testing and other quality control techniques are utilized to the extent AnalogicTech deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed. Advanced Analogic Technologies, Inc. 830 E. Arques Avenue, Sunnyvale, CA 94085 Phone (408) 737-4600 Fax (408) 737-4611 18 4296.2006.12.1.3
AAT4298 价格&库存

很抱歉,暂时无法提供与“AAT4298”相匹配的价格&库存,您可以联系我们找货

免费人工找货