1SVR405621R1100.

Data sheet Pluggable interface relays CR-U Universal relays 2CDC 291 047 F0004 Pluggable interface relays are used for electrical isolation, amplification and signal matching between the electronic controlling, e.g. PLC (programmable logic controller), PC or field bus systems and the sensor / actuator level. They don’t use additional internal protective circuits and thus are overload-proof against short-time variations like current or voltage peaks. Characteristics –– Standard universal relays with mechanical statUs indication –– 12 different supply voltages: DC versions: 12 V, 24 V, 48 V, 110 V, 125 V, 220 V AC versions: 24 V, 48 V, 60 V, 110 V, 120 V, 230 V –– Output: 2 c/o (SPDT) contacts (10 A), 3 c/o (SPDT) contacts (10 A) –– Available with or without LED –– Integrated test button for manual actuation and locking of output contacts (DC coil = blue, AC coil = orange) that can be removed if necessary –– Cadmium-free contact material –– Width on socket: 38 mm (1.496 in) –– Pluggable function modules: reverse polarity protection/ free wheeling diode, LED indication, RC elements, overvoltage protection, multifunction time module Approvals G ANSI/UL 508 O CAN/CSA C22.2 No.14 F J CAN/CSA C22.2 No.14 VDE R EAC P Lloyds Register E L CCC RMRS Marks a CE (except 60 V and 125 V devices) (except 125 V devices) (except 125 V devices) (except 60 V and 125 V devices) Order data Packing unit = 10 pieces Interface relays without LED, 2 c/o (SPDT) contacts: 250 V, 10 A Type Rated control supply voltage Us Order code CR-U012DC2 12 V DC 1SVR 405 621 R4000 CR-U024DC2 24 V DC 1SVR 405 621 R1000 CR-U048DC2 48 V DC 1SVR 405 621 R6000 CR-U110DC2 110 V DC 1SVR 405 621 R8000 CR-U220DC2 220 V DC 1SVR 405 621 R9000 CR-U024AC2 24 V AC 1SVR 405 621 R0000 CR-U048AC2 48 V AC 1SVR 405 621 R5000 CR-U110AC2 110 V AC 1SVR 405 621 R7000 CR-U120AC2 120 V AC 1SVR 405 621 R2000 CR-U230AC2 230 V AC 1SVR 405 621 R3000 Interface relays without LED, 3 c/o (SPDT) contacts: 250 V, 10 A CR-U012DC3 12 V DC 1SVR 405 622 R4000 CR-U024DC3 24 V DC 1SVR 405 622 R1000 CR-U048DC3 48 V DC 1SVR 405 622 R6000 CR-U110DC3 110 V DC 1SVR 405 622 R8000 CR-U125DC3 125 V DC 1SVR 405 622 R8200 CR-U220DC3 220 V DC 1SVR 405 622 R9000 CR-U024AC3 24 V AC 1SVR 405 622 R0000 CR-U048AC3 48 V AC 1SVR 405 622 R5000 CR-U060AC3 60 V AC 1SVR 405 622 R5200 CR-U110AC3 110 V AC 1SVR 405 622 R7000 CR-U120AC3 120 V AC 1SVR 405 622 R2000 CR-U230AC3 230 V AC 1SVR 405 622 R3000 Interface relays with LED, 2 c/o (SPDT) contacts: 250 V, 10 A CR-U012DC2L 12 V DC 1SVR 405 621 R4100 CR-U024DC2L 24 V DC 1SVR 405 621 R1100 CR-U048DC2L 48 V DC 1SVR 405 621 R6100 CR-U110DC2L 110 V DC 1SVR 405 621 R8100 CR-U220DC2L 220 V DC 1SVR 405 621 R9100 CR-U024AC2L 24 V AC 1SVR 405 621 R0100 CR-U048AC2L 48 V AC 1SVR 405 621 R5100 CR-U110AC2L 110 V AC 1SVR 405 621 R7100 CR-U120AC2L 120 V AC 1SVR 405 621 R2100 CR-U230AC2L 230 V AC 1SVR 405 621 R3100 2 - Pluggable interface relays CR-U | Data sheet Interface relays with LED, 3 c/o (SPDT) contacts: 250 V, 10 A CR-U012DC3L 12 V DC 1SVR 405 622 R4100 CR-U024DC3L 24 V DC 1SVR 405 622 R1100 CR-U048DC3L 48 V DC 1SVR 405 622 R6100 CR-U110DC3L 110 V DC 1SVR 405 622 R8100 CR-U220DC3L 220 V DC 1SVR 405 622 R9100 CR-U024AC3L 24 V AC 1SVR 405 622 R0100 CR-U048AC3L 48 V AC 1SVR 405 622 R5100 CR-U110AC3L 110 V AC 1SVR 405 622 R7100 CR-U120AC3L 120 V AC 1SVR 405 622 R2100 CR-U230AC3L 230 V AC 1SVR 405 622 R3100 Interface relays with LED and freewheeling diode, 3 c/o (SPDT) contacts: 250 V, 10 A CR-U024DC3LD 24 V DC 1SVR 405 623 R1100 Accessories Sockets Type Version Order code Sockets CR-U2S for 2 c/o (SPDT) contacts + module 1SVR 405 670 R0000 CR-U3S for 3 c/o (SPDT) contacts + module 1SVR 405 660 R0000 CR-U3E for 3 c/o (SPDT) contacts 1SVR 405 660 R0100 CR-U2SM for 2 c/o (SPDT) contacts 1SVR 405 670 R1100 CR-U3SM for 3 c/o (SPDT) contacts 1SVR 405 660 R1100 Metall holder 1SVR 405 669 R0000 Small sockets Accessories for CR-U sockets CR-UH Data sheet | Pluggable interface relays CR-U - 3 Function modules Type Rated control supply voltage Us Version Order code Diode - Reverse polarity protection CR-U 21 6-220 V DC A1+, A2- 1SVR 405 661 R0000 Diode and LED - Reverse polarity protection CR-U 41 6-24 V DC red, A1+, A2- 1SVR 405 662 R0000 CR-U 41V 6-24 V DC green, A1+, A2- 1SVR 405 662 R1000 CR-U 41B 24-60 V DC red, A1+, A2- 1SVR 405 662 R4000 CR-U 41BV 24-60 V DC green, A1+, A2- 1SVR 405 662 R4100 CR-U 41C 110 V DC red, A1+, A2- 1SVR 405 662 R9000 CR-U 41CV 110 V DC green, A1+, A2- 1SVR 405 662 R9100 RC element - Arc elimination CR-U 51B 6-24 V AC/DC 1SVR 405 663 R0000 CR-U 51D 24-60 V AC/DC 1SVR 405 663 R4000 CR-U 51C 110-230 V AC/DC 1SVR 405 663 R1000 Diode and LED CR-U 61 6-24 V AC/DC red, for DC: A1+, A2- 1SVR 405 664 R0000 CR-U 61V 6-24 V AC/DC green, for DC: A1+, A2- 1SVR 405 664 R1000 CR-U 61E 24-60 V AC/DC red, for DC: A1+, A2- 1SVR 405 664 R4000 CR-U 61EV 24-60 V AC/DC green, for DC: A1+, A2- 1SVR 405 664 R4100 CR-U 91 110-230 V AC / 110 V DC red, for DC: A1+, A2- 1SVR 405 664 R0100 CR-U 91V 110-230 V AC / 110 V DC green, for DC: A1+, A2- 1SVR 405 664 R1100 6-24 V AC/DC red, for DC: A1+, A2- 1SVR 405 665 R0000 CR-U 61CV 6-24 V AC/DC green, for DC: A1+, A2- 1SVR 405 665 R1000 CR-U 61D 24-60 V AC/DC red, for DC: A1+, A2- 1SVR 405 665 R4000 CR-U 61DV 24-60 V AC/DC green, for DC: A1+, A2- 1SVR 405 665 R4100 CR-U 91C 110-230 V AC / 110 V DC red, for DC: A1+, A2- 1SVR 405 665 R0100 CR-U 91CV 110-230 V AC / 110 V DC green, for DC: A1+, A2- 1SVR 405 665 R1100 Varistor and LED - Overvoltage protection CR-U 61C Varistor - Overvoltage protection CR-U 71 24 V AC 1SVR 405 666 R0000 CR-U 71A 115 V AC 1SVR 405 666 R1000 CR-U 81 230 V AC 1SVR 405 666 R2000 Multifunction time module Type Rated control supply voltage Us Order code 24-240 V AC/DC 1SVR 405 667 R0000 Multifunction timer module CR-U T pluggable onto CR-U2S and CR-U3S All CR-U modules can be plugged onto sockets CR-U2S and CR-U3S. 4 - Pluggable interface relays CR-U | Data sheet Functions Operating controls 1 Socket 1 2 Pluggable function module 2 3 Interface relay 4 Holder 2CDC 291 001 S0011 3 4 Application Interface relays are electromechanic and electronic input and output modules for electrical isolation, levelling, noise suppression or signal amplifi cation between control unit and process. Operating mode When control supply voltage is applied, the output contacts get closed. When control supply voltage is switched off, the contacts fall back into their starting position. Manual operation and locking of the output relays is possible via the integrated test button. Note: During operation of the relay the test button is warming up. To manually press the test button, first switch off the supply voltage of the relay and wait for a while until the button cools down (or press without delay, using protective gloves or insulated tools). Press the button smoothly and quickly. As long as the button is pressed the n/o contacts are closed. Releasing the button opens the n/o contacts. A 90 degree rotation of the test button closes the n/o contacts permanently. Reverse rotation of the test button re-opens the n/o contacts. Data sheet | Pluggable interface relays CR-U - 5 Electrical connection CR-U with 2 c/o (SPDT) contacts A1-A2 Control supply voltage 11-12/14, Relay outputs 2CDC 292 024 F0004 31-32/34 Connection diagram CR-U with 3 c/o (SPDT) contacts A1-A2 Control supply voltage 11-12/14, Relay outputs 21-22/24, 2CDC 292 030 F0004 31-32/34 Connection diagram Technical data Input circuit - Coil data A1-A2 DC coils AC Coils Rated control supply voltage Us Rated frequency Make voltage (at 20 °C) Maxium voltage (at 55 °C) Break voltage Rated power Coil resistance (at 20 °C) Tolerance of coil resistance 12 V DC - 9.6 V DC 13.2 V DC ≥ 0.1 Us 1,5 W 110 Ω ± 10 % 24 V DC - 19.2 V DC 26.4 V DC ≥ 0.1 Us 1,5 W 430 Ω ± 10 % 48 V DC - 38.4 V DC 52.8 V DC ≥ 0.1 Us 1,5 W 1750 Ω ± 10 % 110 V DC - 88.0 V DC 121.0 V DC ≥ 0.1 Us 1,5 W 9200 Ω ± 10 % 125 V DC - 100 V DC 137.5 V DC ≥ 0.1 Us 1,5 W 11000 Ω ± 10 % 220 V DC - 176.0 V DC 242.0 V DC ≥ 0.1 Us 1,5 W 37000 Ω ± 10 % 24 V AC 50/60 Hz 19.2 V AC 26.4 V AC ≥ 0.15 Us 2,8 VA (50 Hz) 75 Ω ± 10 % 305 Ω ± 10 % 475 Ω ± 10 % 1700 Ω ± 10 % 1910 Ω ± 10 % 7080 Ω ± 10 % 2,5 VA (60 Hz) 48 V AC 50/60 Hz 38.4 V AC 52.8 V AC ≥ 0.15 Us 2,8 VA (50 Hz) 2,5 VA (60 Hz) 60 V AC 50/60 Hz 48.0 V AC 66.0 V AC ≥ 0.15 Us 2,8 VA (50 Hz) 2,5 VA (60 Hz) 110 V AC 50/60 Hz 88.0 V AC 121.0 V AC ≥ 0.15 Us 2,8 VA (50 Hz) 2,5 VA (60 Hz) 120 V AC 50/60 Hz 96.0 V AC 132.0 V AC ≥ 0.15 Us 2,8 VA (50 Hz) 2,5 VA (60 Hz) 230 V AC 50/60 Hz 184.0 V AC 253.0 V AC ≥ 0.15 Us 2,8 VA (50 Hz) 2,5 VA (60 Hz) 6 - Pluggable interface relays CR-U | Data sheet Output circuits Type CR-U...2 CR-U...3 Output circuits 11-12/14, 11-12/14, 31-32/34 21-22/24, 31-32/34 Kind of output relays, 2 c/o (SPDT) relays, 3 c/o (SPDT) contacts contacts Contact material AgNi Rated operational voltage Ue (IEC/EN 60947-1) 250 V Minimum switching voltage 10 V Maximum switching voltage 250 V DC / 440 V AC Minimum switching current 5 mA Rated free air thermal current Ith Rated operational current (IEC/EN 60947-5-1) AC rating * (UL 508; NEMA ICS-5) DC rating * (UL 508; NEMA ICS-5) 10 A AC-12 (resistive) 230 V 10 A AC-15 (inductive) 230 V 1.5 A AC-15 (inductive) 120 V 3A DC-12 (resistive) 24 V 10 A DC-13 (inductive) 24 V 2A DC-13 (inductive) 120 V 0.22 A DC-13 (inductive) 250 V 0.1 A Utilization category (pilot duty) (Contact rating code designation) B300 Max. rated operational voltage 300 V AC Max. continuous thermal current at utilization category 5A Max. making / breaking apparent power at utilization category 3600 / 360 VA Utilization category General Purpose (single-phase) 10 A, 250 V AC Utilization category (resistive) (CSA22.2 No.14....) 10 A, 250 V AC Utilization category (pilot duty) (Contact rating code designation) R300 Max. rated operational voltage 300 V DC Max. continuous thermal current at utilization category 1A Max. making / breaking apparent power at utilization category 28 VA Utilization category (resistive) (CSA22.2 No.14....) 10 A, 28 V DC Maximum making (inrush) current 20 A Minimum switching power Maximum switching (breaking) power 0.3 W AC-1 (resistive) Contact resistance Maximum operating frequency ≤ 100 mΩ rated load AC-1 without load Mechanical lifetime Electrical lifetime 2500 VA 1200 switching cycles / h 12000 switching cycles / h > 2 x 107 switching cycles / h AC-1 (resistive) cos φ > 105 switching cycles (12 A, 250 V) See reduction factor F Response time typ. 18 ms (DC), typ. 12 ms (AC) Release time typ. 7 ms (DC), typ. 10 ms (AC) *) Those ratings are based on different type tests but they are not covered by the cULus or CSA approvals Data sheet | Pluggable interface relays CR-U - 7 Isolation data Type CR-U...2 Rated insulation voltage 250 V AC Insulation class C250 Rated impulse withstand voltage Uimp between coil and contacts 2.5 kV between open contacts 1.5 kV between c/o (SPDT) contacts CR-U...3 2 kV Clearance between coil and contacts ≥ 3 mm Creepage distance between coil and contacts ≥ 4.2 mm Overvoltage category III Pollution degree 3 General data Type CR-U...2 Dimensions (W x H x D) when mounted 35 x 35 x 54.4 mm (1.378 x 1.378 x 2.142 in) CR-U...3 Weight 83 g (0.18 lb) Mounting on socket (see accessories) Mounting position any Degree of protection IP 40 Electrical data Type CR-U...2 Connection by socket CR-U...3 Environmental data Type CR-U...2 Ambient temperature range operation storage Vibration resistance (10-150 Hz) Shock resistance CR-U...3 DC: -40...+70 °C; AC: -40...+55 °C -40...+85 °C n/o contact 5g n/c contact 5g n/o contact 10 g n/c contact 10 g Standards / Directives Type CR-U...2 Standards IEC/EN 61810-1 Low Voltage Directive 2014/35/EU RoHS Directive 2011/65/EU CR-U...3 Technical diagrams 8 - Pluggable interface relays CR-U | Data sheet Switching power [kVA] 2CDC 292 027 F0204 2 = inductive load, T = 40 ms DC voltage [V] Load limit curve Electrical lifetime at resistive AC load Switching cycles 1 = resistive load, T = 0 ms 2CDC 292 028 F0204 DC current [A] Load limit curve Maximum switching power at resistive load Power factor 2CDC 292 029 F0204 Reduction factor Reduction factor F at inductive AC load Dimensions 2CDC 252 025 F0004 in mm 2CDC 252 026 F0004 Versions with 2 c/o (SPDT) contacts (CR-U ... 2) Versions with 3 c/o (SPDT) contacts (CR-U ... 3) Further documentation Document title Document type Document number Electronic Products and Relays Technical catalogue 2CDC 110 004 C02xx Sockets CR-U Data sheet 2CDC 117 006 D020x Pluggable function modules CR-U Data sheet 2CDC 117 008 D020x Pluggable multifunction time module CR-U T Data sheet 2CDC 117 010 D020x You can find the documentation on the internet at www.abb.com/lowvoltage -> Automation, control and protection -> Electronic relays and controls -> Interface relays and optocouplers. CAD system files You can find the CAD files for CAD systems at http://abb-control-products.partcommunity.com -> Low Voltage Products & Systems -> Control Products -> Electronic Relays and Controls. Data sheet | Pluggable interface relays CR-U - 9 Contact us Document number 2CDC 117 003 D0206 (10/2016) ABB STOTZ-KONTAKT GmbH P. O. Box 10 16 80 69006 Heidelberg, Germany Phone: +49 (0) 6221 7 01-0 Fax: +49 (0) 6221 7 01-13 25 E-mail: info.desto@de.abb.com You can find the address of your local sales organization on the ABB home page http://www.abb.com/contacts -> Low Voltage Products and Systems Note: We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB AG does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents – in whole or in parts – is forbidden without prior written consent of ABB AG. Copyright© 2016 ABB All rights reserved