1SVR405651R3100

Data sheet Pluggable interface relays CR-M Miniature relays 2CDC 291 002 S0015 Pluggable interface relays are used for electrical isolation, amplification and signal matching between the electronic controlling, e.g. PLC (programmable logic controller), PC or field bus systems and the sensor / actuator level. They don’t use additional internal protective circuits and thus are overload-proof against short-time variations like current or voltage peaks. Characteristics –– Standard miniature relays with mechanical status indication –– 13 different rated control supply voltages: DC versions: 12 V, 24 V, 48 V, 60 V, 110 V, 125 V, 220 V AC versions: 24 V, 48 V, 60 V, 110 V, 120 V, 230 V –– Output: 2 c/o (SPDT) contacts (12 A), 3 c/o (SPDT) contacts (10 A) or 4 c/o (SPDT) contacts (6 A) –– Available with or without LED –– 4 c/o (SPDT) contact version optionally equipped with gold contacts, LED and free wheeling diode –– Integrated test button for manual actuation and locking of output contacts (DC coil = blue, AC coil = orange) that can be removed if necessary –– Cadmium-free contact material –– Suited for logical and standard sockets –– Width on socket: 27 mm (1.063 in) –– Pluggable function modules: reverse polarity protection/ free wheeling diode, LED indication, RC elements, overvoltage protection Approvals H ANSI/UL 508, CAN/CSA C22.2 No.14 F J CAN/CSA C22.2 No.14 VDE R EAC P Lloyds Register E L CCC (only devices with 4 c/o (SPDT) contacts) RMRS Marks a (except 125 V DC devices) CE (except 60 V and 125 V devices) Order data Packing unit = 10 pieces Interface relays without LED, 2 c/o (SPDT) contacts: 250 V, 12 A Type Rated control supply voltage Us Order code CR-M012DC2 12 V DC 1SVR 405 611 R4000 CR-M024DC2 24 V DC 1SVR 405 611 R1000 CR-M048DC2 48 V DC 1SVR 405 611 R6000 CR-M060DC2 60 V DC 1SVR 405 611 R4200 CR-M110DC2 110 V DC 1SVR 405 611 R8000 CR-M125DC2 125 V DC 1SVR 405 611 R8200 CR-M220DC2 220 V DC 1SVR 405 611 R9000 CR-M024AC2 24 V AC 1SVR 405 611 R0000 CR-M048AC2 48 V AC 1SVR 405 611 R5000 CR-M110AC2 110 V AC 1SVR 405 611 R7000 CR-M120AC2 120 V AC 1SVR 405 611 R2000 CR-M230AC2 230 V AC 1SVR 405 611 R3000 Interface relays without LED, 3 c/o (SPDT) contacts: 250 V, 10 A CR-M012DC3 12 V DC 1SVR 405 612 R4000 CR-M024DC3 24 V DC 1SVR 405 612 R1000 CR-M048DC3 48 V DC 1SVR 405 612 R6000 CR-M060DC3 60 V DC 1SVR 405 612 R4200 CR-M110DC3 110 V DC 1SVR 405 612 R8000 CR-M125DC3 125 V DC 1SVR 405 612 R8200 CR-M220DC3 220 V DC 1SVR 405 612 R9000 CR-M024AC3 24 V AC 1SVR 405 612 R0000 CR-M048AC3 48 V AC 1SVR 405 612 R5000 CR-M060AC3 60 V AC 1SVR 405 612 R5200 CR-M110AC3 110 V AC 1SVR 405 612 R7000 CR-M120AC3 120 V AC 1SVR 405 612 R2000 CR-M230AC3 230 V AC 1SVR 405 612 R3000 Interface relays without LED, 4 c/o (SPDT) contacts: 250 V, 6 A CR-M012DC4 12 V DC 1SVR 405 613 R4000 CR-M024DC4 24 V DC 1SVR 405 613 R1000 CR-M048DC4 48 V DC 1SVR 405 613 R6000 CR-M060DC4 60 V DC 1SVR 405 613 R4200 CR-M110DC4 110 V DC 1SVR 405 613 R8000 CR-M125DC4 125 V DC 1SVR 405 613 R8200 CR-M220DC4 220 V DC 1SVR 405 613 R9000 CR-M024AC4 24 V AC 1SVR 405 613 R0000 CR-M048AC4 48 V AC 1SVR 405 613 R5000 CR-M110AC4 110 V AC 1SVR 405 613 R7000 CR-M120AC4 120 V AC 1SVR 405 613 R2000 CR-M230AC4 230 V AC 1SVR 405 613 R3000 2 - Pluggable interface relays CR-M | Data sheet Interface relays with LED, 2 c/o (SPDT) contacts: 250 V, 12 A Type Rated control supply voltage Us Order code CR-M012DC2L 12 V DC 1SVR 405 611 R4100 CR-M024DC2L 24 V DC 1SVR 405 611 R1100 CR-M048DC2L 48 V DC 1SVR 405 611 R6100 CR-M060DC2L 60 V DC 1SVR 405 611 R4300 CR-M110DC2L 110 V DC 1SVR 405 611 R8100 CR-M125DC2L 125 V DC 1SVR 405 611 R8300 CR-M220DC2L 220 V DC 1SVR 405 611 R9100 CR-M024AC2L 24 V AC 1SVR 405 611 R0100 CR-M048AC2L 48 V AC 1SVR 405 611 R5100 CR-M110AC2L 110 V AC 1SVR 405 611 R7100 CR-M120AC2L 120 V AC 1SVR 405 611 R2100 CR-M230AC2L 230 V AC 1SVR 405 611 R3100 Interface relays with LED, 3 c/o (SPDT) contacts: 250 V, 10 A CR-M012DC3L 12 V DC 1SVR 405 612 R4100 CR-M024DC3L 24 V DC 1SVR 405 612 R1100 CR-M048DC3L 48 V DC 1SVR 405 612 R6100 CR-M060DC3L 60 V DC 1SVR 405 612 R4300 CR-M110DC3L 110 V DC 1SVR 405 612 R8100 CR-M125DC3L 125 V DC 1SVR 405 612 R8300 CR-M220DC3L 220 V DC 1SVR 405 612 R9100 CR-M024AC3L 24 V AC 1SVR 405 612 R0100 CR-M048AC3L 48 V AC 1SVR 405 612 R5100 CR-M110AC3L 110 V AC 1SVR 405 612 R7100 CR-M120AC3L 120 V AC 1SVR 405 612 R2100 CR-M230AC3L 230 V AC 1SVR 405 612 R3100 Interface relays with LED, 4 c/o (SPDT) contacts: 250 V, 6 A CR-M012DC4L 12 V DC 1SVR 405 613 R4100 CR-M024DC4L 24 V DC 1SVR 405 613 R1100 CR-M048DC4L 48 V DC 1SVR 405 613 R6100 CR-M060DC4L 60 V DC 1SVR 405 613 R4300 CR-M110DC4L 110 V DC 1SVR 405 613 R8100 CR-M125DC4L 125 V DC 1SVR 405 613 R8300 CR-M220DC4L 220 V DC 1SVR 405 613 R9100 CR-M024AC4L 24 V AC 1SVR 405 613 R0100 CR-M048AC4L 48 V AC 1SVR 405 613 R5100 CR-M110AC4L 110 V AC 1SVR 405 613 R7100 CR-M120AC4L 120 V AC 1SVR 405 613 R2100 CR-M230AC4L 230 V AC 1SVR 405 613 R3100 Interface relays with LED and free wheeling diode, 4 c/o (SPDT) contacts: 250 V, 6 A CR-M024DC4LD 24 V DC 1SVR 405 614 R1100 Interface relays with gold contacts, 4 c/o (SPDT) contacts: 250 V, 6 A CR-M024DC4G 24 V DC 1SVR 405 618 R1000 CR-M024AC4G 24 V AC 1SVR 405 618 R0000 CR-M110AC4G 110 V AC 1SVR 405 618 R7000 CR-M230AC4G 230 V AC 1SVR 405 618 R3000 Data sheet | Pluggable interface relays CR-M - 3 Interface relays with LED and gold contacts, 4 c/o (SPDT) contacts: 250 V, 6 A Type Rated control supply voltage Us Order code CR-M012DC4LG 12 V DC 1SVR 405 618 R4100 CR-M024DC4LG 24 V DC 1SVR 405 618 R1100 CR-M048DC4LG 48 V DC 1SVR 405 618 R6100 CR-M060DC4LG 60 V DC 1SVR 405 618 R4300 CR-M110DC4LG 110 V DC 1SVR 405 618 R8100 CR-M125DC4LG 125 V DC 1SVR 405 618 R8300 CR-M220DC4LG 220 V DC 1SVR 405 618 R9100 CR-M024AC4LG 24 V AC 1SVR 405 618 R0100 CR-M048AC4LG 48 V AC 1SVR 405 618 R5100 CR-M110AC4LG 110 V AC 1SVR 405 618 R7100 CR-M120AC4LG 120 V AC 1SVR 405 618 R2100 CR-M230AC4LG 230 V AC 1SVR 405 618 R3100 Interface relays with gold contacts, LED and free wheeling diode, 4 c/o (SPDT) contacts: 250 V, 6 A CR-M012DC4LDG 12 V DC 1SVR 405 618 R4400 CR-M024DC4LDG 24 V DC 1SVR 405 618 R1400 Accessories Packing unit = 10 pieces Function modules Type Rated control supply voltage Us Version Order code A1+, A2- 1SVR 405 651 R0000 Diode - Reverse polarity protection CR-P/M 22 6-220 V DC Diode and LED - Reverse polarity protection CR-P/M 42 6-24 V DC red, A1+, A2- 1SVR 405 652 R0000 CR-P/M 42V 6-24 V DC green, A1+, A2- 1SVR 405 652 R1000 CR-P/M 42B 24-60 V DC red, A1+, A2- 1SVR 405 652 R4000 CR-P/M 42BV 24-60 V DC green, A1+, A2- 1SVR 405 652 R4100 CR-P/M 42C 110 V DC red, A1+, A2- 1SVR 405 652 R9000 CR-P/M 42CV 110 V DC green, A1+, A2- 1SVR 405 652 R9100 RC element - Arc elimination CR-P/M 52B 6-24 V AC/DC 1SVR 405 653 R0000 CR-P/M 52D 24-60 V AC/DC 1SVR 405 653 R4000 CR-P/M 52C 110-230 V AC/DC 1SVR 405 653 R1000 Diode and LED CR-P/M 62 6-24 V AC/DC red, for DC: A1+, A2- 1SVR 405 654 R0000 CR-P/M 62V 6-24 V AC/DC green, for DC: A1+, A2- 1SVR 405 654 R1000 CR-P/M 62E 24-60 V AC/DC red, for DC: A1+, A2- 1SVR 405 654 R4000 CR-P/M 62EV 24-60 V AC/DC green, for DC: A1+, A2- 1SVR 405 654 R4100 CR-P/M 92 110-230 V AC / 110 V DC red, for DC: A1+, A2- 1SVR 405 654 R0100 CR-P/M 92V 110-230 V AC / 110 V DC green, for DC: A1+, A2- 1SVR 405 654 R1100 4 - Pluggable interface relays CR-M | Data sheet Varistor and LED - Overvoltage protection CR-P/M 62C 6-24 V AC/DC red, for DC: A1+, A2- 1SVR 405 655 R0000 CR-P/M 62CV 6-24 V AC/DC green, for DC: A1+, A2- 1SVR 405 655 R1000 CR-P/M 62D 24-60 V AC/DC red, for DC: A1+, A2- 1SVR 405 655 R4000 CR-P/M 62DV 24-60 V AC/DC green, for DC: A1+, A2- 1SVR 405 655 R4100 CR-P/M 92C 110-230 V AC / 110 V DC red, for DC: A1+, A2- 1SVR 405 655 R0100 CR-P/M 92CV 110-230 V AC / 110 V DC green, for DC: A1+, A2- 1SVR 405 655 R1100 Varistor - Overvoltage protection CR-P/M 72 24 V AC 1SVR 405 656 R0000 CR-P/M 72A 115 V AC 1SVR 405 656 R1000 CR-P/M 82 230 V AC 1SVR 405 656 R2000 Plug to replace the test button (Packing unit = 100 pieces) CR-MP 1SVR 405 658 R2000 Sockets Type Version Connection Order code CR-M2LS for 2 c/o (SPDT) contacts screw 1SVR 405 651 R1100 CR-M3LS for 3 c/o (SPDT) contacts screw 1SVR 405 651 R2100 CR-M4LS for 2 or 4 c/o (SPDT) contacts screw 1SVR 405 651 R3100 CR-M2LC for 2 c/o (SPDT) contacts spring 1SVR 405 651 R1200 CR-M4LC for 2 or 4 c/o (SPDT) contacts spring 1SVR 405 651 R3200 CR-M2SS for 2 c/o (SPDT) contacts screw 1SVR 405 651 R1000 CR-M3SS for 3 c/o (SPDT) contacts screw 1SVR 405 651 R2000 CR-M4SS for 2 or 4 c/o (SPDT) contacts screw 1SVR 405 651 R3000 CR-M2SF for 2 c/o (SPDT) contacts fork type screw 1SVR 405 651 R1300 CR-M4SF for 2 or 4 c/o (SPDT) contacts fork type screw 1SVR 405 651 R3300 Logical sockets Standard sockets Accessories for CR-M sockets CR-MH Plastic holder 1SVR 405 659 R1000 CR-MH1 Metall holder 1SVR 405 659 R1100 CR-MJ Jumper bar for sockets with screw clamps 1SVR 405 658 R6000 CR-MM Marker 1SVR 405 658 R1000 Data sheet | Pluggable interface relays CR-M - 5 Functions Operating controls 1 2 1 Socket 2 Pluggable function module 3 Interface relay 4 Holder 2CDC 295 003 F0011 3 4 Application Interface relays are electromechanic and electronic input and output modules for electrical isolation, levelling, noise suppression or signal amplifi cation between control unit and process. Operating mode When control supply voltage is applied, the output contacts get closed. When control supply voltage is switched off, the contacts fall back into their starting position. Manual operation and locking of the output relays is possible via the integrated test button. Note: During operation of the relay the test button is warming up. To manually press the test button, first switch off the supply voltage of the relay and wait for a while until the button cools down (or press without delay, using protective gloves or insulated tools). Press the button smoothly and quickly. As long as the button is pressed the n/o contacts are closed. Releasing the button opens the n/o contacts. A 90 degree rotation of the test button closes the n/o contacts permanently. Reverse rotation of the test button re-opens the n/o contacts. 6 - Pluggable interface relays CR-M | Data sheet Electrical connection CR-M with 2 c/o (SPDT) contacts A1-A2 Control supply voltage 11-12/14, Relay outputs 2CDC 292 011 F0004 41-42/44 Connection diagram CR-M with 3 c/o (SPDT) contacts A1-A2 Control supply voltage 11-12/14, Relay outputs 21-22/24, 2CDC 292 016 F0004 31-32/34 Connection diagram CR-M with 4 c/o (SPDT) contacts A1-A2 Control supply voltage 11-12/14, Relay outputs 21-22/24, 31-32/34, 2CDC 292 020 F0004 41-42/44 Connection diagram Data sheet | Pluggable interface relays CR-M - 7 Technical data Input circuit - Coil data A1-A2 DC coils AC coils Rated control supply voltage Us Rated frequency 12 V DC - 24 V DC 48 V DC Make voltage Break voltage Rated power (at 20 °C) Maxium voltage (at 55 °C) Coil resistance (at 20 °C) Tolerance of coil resistance 9.6 V DC 13.2 V DC ≥ 0.1 Us 0.9 W 160 Ω ± 10 % - 19.2 V DC 26.4 V DC ≥ 0.1 Us 0.9 W 640 Ω ± 10 % - 38.4 V DC 52.8 V DC ≥ 0.1 Us 0.9 W 2600 Ω ± 10 % 60 V DC - 48.0 V DC 66.0 V DC ≥ 0.1 Us 0.9 W 4000 Ω ± 10 % 110 V DC - 88.0 V DC 121.0 V DC ≥ 0.1 Us 0.9 W 13600 Ω ± 10 % 125 V DC - 100.0 V DC 137.5 V DC ≥ 0.1 Us 0.9 W 16000 Ω ± 10 % 220 V DC - 176.0 V DC 242.0 V DC ≥ 0.1 Us 0.9 W 54000 Ω ± 10 % 24 V AC 50/60 Hz 19.2 V AC 26.4 V AC ≥ 0.2 Us 1.6 VA 158 Ω ± 10 % 48 V AC 50/60 Hz 38.4 V AC 52.8 V AC ≥ 0.2 Us 1.6 VA 640 Ω ± 10 % 60 V AC 50/60 Hz 48.0 V AC 66.0 V AC ≥ 0.2 Us 1.6 VA 930 Ω ± 10 % 110 V AC 50/60 Hz 88.0 V AC 121.0 V AC ≥ 0.2 Us 1.6 VA 3450 Ω ± 10 % 120 V AC 50/60 Hz 96.0 V AC 132.0 V AC ≥ 0.2 Us 1.6 VA 3770 Ω ± 10 % 230 V AC 50/60 Hz 184.0 V AC 253.0 V AC ≥ 0.2 Us 1.6 VA 16100 Ω ± 10 % Output circuits Type CR-M...2 CR-M...3 CR-M...4 Output circuits 11-12/14, 11-12/14, 11-12/14, 21-22/24 21-22/24, 21-22/24, 31-32/34 31-32/34, 41-42/44 Kind of output Contact material Relay, 2 c/o Relay, 3 c/o Relay, 4 c/o (SPDT) contacts (SPDT) contacts (SPDT) contacts AgNi AgNi AgNi AgNi/Au 5 μm Rated operational voltage Ue (IEC/EN 60947-1) 250 V Minimum switching voltage 10 V (AgNi), 5 V (AgNi/Au) Maximum switching voltage 250 V DC / 250 V AC Minimum switching current 5 mA (AgNi), 2 mA (AgNi/Au) Rated free air thermal current Ith Rated operational current (IEC/EN 60947-5-1) AC rating * (UL 508; NEMA ICS-5) DC rating * (UL 508; NEMA ICS-5) 8 - Pluggable interface relays CR-M | Data sheet 12 A 10 A 6A AC-12 (resistive) 230 V 12 A 10 A 6A AC-15 (inductive) 230 V 1.5 A 1.5 A 1A AC-15 (inductive) 120 V 3A 3A 1.5 A DC-12 (resistive) 24 V 12 A 10 A 6A DC-13 (inductive) 24 V 2.5 A 2.5 A 2A DC-13 (inductive) 120 V 0.22 A 0.22 A 0.22 A DC-13 (inductive) 250 V 0.1 A 0.1 A 0.1 A Utilization category (pilot duty) (Contact rating code designation) B300 Max. rated operational voltage 300 V AC Max. continuous thermal current at utilization category 5A 2.5 A Max. making / breaking apparent power at utilization category 3600 / 360 VA 1800 / 180 VA Utilization category (resistive) (CSA22.2 No.14....) 10 A, 250 V AC 12 A, 150 V AC Utilization category (pilot duty) (Contact rating code designation) R300 Max. rated operational voltage 300 V DC Max. continuous thermal current at utilization category 1A Max. making / breaking apparent power at utilization category 28 VA 6 A, 250 V AC 10 A, 150 V AC 5 A, 250 V AC 10 A, 150 V AC Type CR-M...2 CR-M...3 CR-M...4 Maximum making (inrush) current 24 A 20 A 12 A Minimum switching power 0.3 W (AgNi), 0.1 W (AgNi/Au) Maximum switching (breaking) power AC1 (resistive) Contact resistance Maximum operating frequency 2500 VA 1500 VA ≤ 100 mΩ rated load AC1 without load Mechanical lifetime Electrical lifetime 3000 VA 1200 switching cycles/h 18000 switching cycles/h > 2 x 107 switching cycles electrical AC1 (resistive) > 105 switching cycles (12 A, 250 V) cos φ (10 A, 250 V) (6 A, 250 V) see Reduction factor F Response time typ. 13 ms (DC), typ. 10 ms (AC) Release time typ. 3 ms (DC), typ. 8 ms (AC) *) Those ratings are based on different type tests but they are not covered by the cULus or CSA approvals Isolation data Type CR-M...2 Rated insulation voltage 250 V AC Insulation class C250 / B250 Rated impulse withstand voltage Uimp CR-M...3 CR-M...4 between coil and contacts 2.5 kV between open contacts 1.5 kV between c/o (SPDT) contacts 2.5 kV ≥ 2 kV Clearance between coil and contacts ≥ 2.5 mm ≥ 1.6 mm Creepage distance between coil and contacts ≥ 4 mm ≥ 3.2 mm Overvoltage category III II Pollution degree 3 2 General data Type CR-M...2 CR-M...3 CR-M...4 Dimensions (W x H x D) when mounted 21.2 x 27.5 x 35.6 mm (0.83 x 1.08 x 1.4 in) Weight 35 g (0.077 lb) Mounting on socket (see accessories) Mounting position any Degree of protection IP 40 Electrical data Type CR-M...2 Connection by socket CR-M...3 CR-M...4 CR-M...3 CR-M...4 Environmental data Type Ambient temperature range CR-M...2 operation storage DC: -40...+70 °; AC: -40...+55 °C -40...+85 °C Vibration resistance (10-150 Hz) n/o contact 5g n/c contact 5g Shock resistance n/o contact 10 g n/c contact 5g Standards / Directives Type CR-M...2 Standards IEC/EN 61810-1 CR-M...3 Low Voltage Directive 2014/35/EU RoHS Directive 2011/65/EU CR-M...4 Data sheet | Pluggable interface relays CR-M - 9 Technical diagrams Versions with 2 c/o (SPDT) contacts (CR-M ... 2) 2 = inductive load, T = 40 ms DC voltage [V] Versions with 3 c/o (SPDT) contacts (CR-M ... 3) DC voltage [V] 2CDC 292 023 F0204 DC current [A] 1 = resistive load, T = 0 ms 2CDC 292 019 F0204 DC voltage [V] 2CDC 292 015 F0204 DC current [A] DC current [A] Load limit curves - Maximum switching power at resistive DC load Versions with 4 c/o (SPDT) contacts (CR-M ... 4) Versions with 2 c/o (SPDT) contacts (CR-M ... 2) 2CDC 292 014 F0204 Reduction factor 10 - Pluggable interface relays CR-M | Data sheet Switching power [kVA] Versions with 4 c/o (SPDT) contacts (CR-M ... 4) 2CDC 292 022 F0204 Switching cycles Versions with 3 c/o (SPDT) contacts (CR-M ... 3) Reduction factor F at inductive AC load Power factor Switching power [kVA] 2CDC 292 018 F0204 Switching power [kVA] 2CDC 292 013 F0204 Switching cycles Switching cycles Load limit curves - Electrical lifetime at resistive AC load Dimensions 2CDC 292 001 F0015 in mm 2CDC 292 002 F0015 Versions with 2 c/o (SPDT) contacts (CR-M ... 2) 2CDC 292 003 F0015 Versions with 3 c/o (SPDT) contacts (CR-M ... 3) Versions with 4 c/o (SPDT) contacts (CR-M ... 4) Further documentation Document title Document type Document number Electronic relays and controls Catalog 2CDC 110 004 C02xx Sockets CR-M Data sheet 2CDC 117 005 D020x Jumper bar CR-MJ Data sheet 2CDC 117 015 D020x Pluggable function modules CR-P/M Data sheet 2CDC 117 007 D020x You can find the documentation on the internet at www.abb.com/lowvoltage -> Automation, control and protection -> Electronic relays and controls -> Interface relays and optocouplers. CAD system files You can find the CAD files for CAD systems at http://abb-control-products.partcommunity.com -> Low Voltage Products & Systems -> Control Products -> Electronic Relays and Controls. Data sheet | Pluggable interface relays CR-M - 11 Contact us Document number 2CDC 117 002 D0205 (03/2017) ABB STOTZ-KONTAKT GmbH P. O. Box 10 16 80 69006 Heidelberg, Germany Phone: +49 (0) 6221 7 01-0 Fax: +49 (0) 6221 7 01-13 25 E-mail: info.desto@de.abb.com You can find the address of your local sales organization on the ABB home page http://www.abb.com/contacts -> Low Voltage Products and Systems Note: We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB AG does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents – in whole or in parts – is forbidden without prior written consent of ABB AG. Copyright© 2017 ABB All rights reserved