1SVR405660R0000.

Data sheet Characteristics –– Standard socket for interface relays CR-U –– Snap-on mounting on DIN rail –– Connector for pluggable function modules: reverse polarity protection/free wheeling diode, LED indication, RC element, overvoltage protection, multifunction time module 2CDC 291 007 S0011 Accessories for pluggable interface relays CR-U Sockets Approvals H UL 508, CAN/CSA C22.2 No.14 F CSA C22.2 No.14 R L EAC RMRS Marks a CE Order data Packing unit 10 = pieces. Type Version Order code Standard sockets Position of connecting terminals: coil connection (A1-A2) on lower socket side, contact connections (n/o and n/c contacts) on the lower and upper socket side. CR-U2S for 2 c/o (SPDT) contacts + module 1SVR 405 670 R0000 CR-U3S for 3 c/o (SPDT) contacts + module 1SVR 405 660 R0000 CR-U3E for 3 c/o (SPDT) contacts 1SVR 405 660 R0100 CR-U2SM for 2 c/o (SPDT) contacts 1SVR 405 670 R1100 CR-U3SM for 3 c/o (SPDT) contacts 1SVR 405 660 R1100 Metall holder 1SVR 405 669 R0000 Small sockets Accessories for CR-P sockets CR-UH CR-U2SM CR-U3SM A1-A2 Supply voltage 11-12/14, Relay outputs 21-22/24, 31-32/34 A-B CR-U3E 2CDC 292 012 F0005 CR-U3S 2CDC 292 011 F0005 CR-U2S 2CDC 292 080 F0004 2CDC 292 078 F0004 2CDC 292 077 F0004 Electrical connection (only supply voltage CR-U2SM) 2 - Accessories for pluggable interface relays CR-U | Data sheet Technical data Output circuits Type CR-UxS CR-U2S CR-U3E CR-UxSM CR-U3S Output circuits 11-12/14, 21-22/24,... Number of poles 2 or 3 3 2 or 3 Rated voltage 250 V AC 300 V AC 250 V Rated current 10 A General data Dimensions without holder and module 75.3 x 37.3 x 26 mm 75.3 x 38.1 x 26 mm 70 x 38 x 26 mm 61.8 x 38.1 x 26 mm (L x W x H) (2.965 x 1.469 x 1.024 in) (2.965 x 1.500 x 1.024 in) (2.756 x 1.496 x 1.024 in) (2.756 x 1.500 x 1.024 in) Degree of protection terminals IP 20 B (EN 60529) Temperature range operation -40...+70 °C -40...+85 °C -40...+70 °C storage -40...+70 °C -40...+85 °C -40...+70 °C Connecting capacity rigid 2 x 0.5-2.5 mm2 fine-strand (2 x 20-14 AWG) with wire 2 x 0.5-1.5 mm2 2 x 1.5 mm2 2 x 0.5-1.5 mm2 end ferrule (2 x 20-16 AWG) (2 x 16 AWG) (2 x 20-16 AWG) 0.8 Nm 0.6 Nm Stripping length 7 mm (0.28 in) Tightening torque 0.6 Nm Mounting DIN rail (IEC/EN 60715) Material socket contacts contact PA 6+GF - V2 PA 6+GF - V2 CuZn33 CuZn37 6 µ Ni 3 µ Ni surface terminals combi 8 µ Ni 8.8 Steel, 5µ Ni 8 µ galvanized 10 µ Ni Steel, 8 µ Ni screw M3 Isolation data Insulation voltage > 2 kV Isolation between coil and contacts IEC/EN 61984 Clearance and creepage distance IEC/EN 61984 Standards / Directives Standards IEC/EN 61984 Low Voltage Directive 2014/35/EU RoHS Directive 2011/65/EU Data sheet | Accessories for pluggable interface relays CR-U - 3 Dimensions in mm 37,3 38,1 2CDC 292 008 F0011 75,3 9 - M3 35,4 75,3 12 - M3 4 29,8 29,8 CR-U2S CR-U3S 2CDC 292 081 F0004 CR-UxS CR-U3E 38,1 38,1 26 27,8 27,8 11 - M3 CR-U3SM 4 2CDC 292 009 F0211 CR-U2SM 35,4 61,8 61,8 8 - M3 CR-UxSM Further documentation Document title Document type Document number Electronic Products and Relays Technical catalogue 2CDC 110 004 C020x Relays CR-U Data sheet 2CDC 117 003 D020x Pluggable function modules CR-U Data sheet 2CDC 117 008 D020x Pluggable time module CR-U T Data sheet 2CDC 117 010 D020x You can find the documentation on the internet at www.abb.com/lowvoltage -> Automation, control and protection -> Electronic relays and controls -> Interface relays and optocouplers. CAD system files You can find the CAD files for CAD systems at http://abb-control-products.partcommunity.com -> Low Voltage Products & Systems -> Control Products -> Electronic Relays and Controls. 4 - Accessories for pluggable interface relays CR-U | Data sheet Contact us Document number 2CDC 117 006 D0204 (10/2016) ABB STOTZ-KONTAKT GmbH P. O. Box 10 16 80 69006 Heidelberg, Germany Phone: +49 (0) 6221 7 01-0 Fax: +49 (0) 6221 7 01-13 25 E-mail: info.desto@de.abb.com You can find the address of your local sales organization on the ABB home page http://www.abb.com/contacts -> Low Voltage Products and Systems Note: We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB AG does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents – in whole or in parts – is forbidden without prior written consent of ABB AG. Copyright© 2016 ABB All rights reserved