VRRM IFAVM IFRMS IFSM VF0 rF
= = = = = =
200 V 6130 A 9620 A 45000 A 0.80 V 0.030 mΩ
Rectifier Diode
5SDD 40B0200
Doc. No. 5SYA1154-02 July 06
• Optimized for high current rectifiers • Very low on-state voltage • Very low thermal resistance
Blocking
VRRM VRSM IRRM Repetitive peak reverse voltage Maximum peak reverse voltage Repetitive peak reverse current 200 V 300 V ≤ 50 mA Half sine wave, tP = 10 ms, f = 50 Hz Half sine wave, tP = 10 ms Tj = 170 °C VR = VRRM
Mechanical
FM a Mounting force min. max. Acceleration: Device unclamped Device clamped m DS Da Weight Surface creepage distance Air strike distance 50 m/s2 200 m/s2 0.14 kg 4 mm 4 mm 20 kN 24 kN
Fig. 1 Outline drawing. All dimensions are in millimeters and represent nominal values unless stated otherwise.
ABB Switzerland Ltd, Semiconductors reserves the right to change specifications without notice.
5SDD 40B0200
On-state
IFAVM IFRMS IFSM ∫I2dt Max. average on-state current Max. RMS on-state current Max. peak non-repetitive surge current 6130 A 9620 A 45000 A 48000 A Max. surge current integral tp = tp = 10 ms Before surge 8.3 ms Tj = 170 °C 10 ms After surge: Half sine wave, Tc = 85 °C
10125 kA2s tp = 9600 kA2s tp =
8.3 ms VR ≈ 0V 5000 A Tj = 25 °C
VF max VF0 rF
Maximum on-state voltage Threshold voltage Slope resistance
≤
1.15 V 0.80 V 0.030 mΩ
IF =
Approximation for Tj = 170 °C IF = 5 - 15 kA
Thermal characteristics
Tj Tstg Rth(j-c) Operating junction temperature range Storage temperature range Thermal resistance junction to case -40...170 °C -40…170 °C ≤ ≤ ≤ Rth(c-h) Thermal resistance case to heatsink ≤ ≤ 20 K/kW Anode side cooled 20 K/kW Cathode side cooled 10 K/kW Double side cooled 10 K/kW Single side cooled 5 K/kW Double side cooled FM = 20…24 kN
ZthJC [K/kW]
12 Double Side Cooled 10 Fm = 20...24 kN
Z th ( j - c )(t) =
i Ri (K/kW) τi (s)
5SDD 40B0200
∑
2
4
R i (1 - e - t / τ i )
3 0.87 0.0034 4 0.55 0.00013
i =1
3.30
8
1 5.28 0.07
6
4
0.039
2
FM = 20… 24 kN Double side cooled
0 10-3
10-2
10-1
t [s]
100
Fig. 2 Transient thermal impedance (junction-to-case) vs. time in analytical and graphical forms.
ABB Switzerland Ltd, Semiconductors reserves the right to change specifications without notice.
page 2 of 4 Doc. No. 5SYA1156-02 July 06
5SDD 40B0200
On-state characteristics
IF [A]
20000 18000 16000 14000 12000 10000 8000 6000 4000 2000 0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 min. max.
Surge current characteristics
IFSM [kA]
80
5SDD 40B0200
∫ i2dt [MA2s]
15
Tj = 170°C
70
IFSM
Tj = 170°C
14 13 12
60
11 10
50
9 8
5SDD 40B0200
40
∫i t
2
7 6
30 10
0
5 10
1
1.6
10
2
VF [V]
t [ms]
Fig. 3
Forward current vs. forward voltage (min. and max. values).
Fig. 4 Surge current and fusing integral vs. pulse width (max. values) for non-repetitive, halfsinusoidal surge current pulses.
Current load capability
ID ( k A )
16 15 14 13 12 11 10 1 10
5S D D 4 0B 0200
ID vs. ED, 1000 Hz square wave, Tc = 100 °C
n n n n = 50 = 100 = 500 = 1000 p ulses p u ls es p u ls es p u ls es
Duty cycle ED (%)
100
Fig. 5
DC-output current with single-phase centre tap
ABB Switzerland Ltd, Semiconductors reserves the right to change specifications without notice.
page 3 of 4 Doc. No. 5SYA1156-02 July 06
5SDD 40B0200
Current load capacity, cont.
ID ( k A )
22 20 18 16 14 12 10 1 10
5S D D 40B 0200
ID vs. ED, 1000 Hz square wave, T h= 60 °C
n n n n = 50 = 100 = 500 = 1000 p u ls es p u ls es p u ls es p u ls es
Duty cycle ED (%)
100
Fig. 6
DC-output current with single-phase centre tap
ID +
Fig. 7 Definition of ED for typical welding sequence
Fig. 8 Definition of ID for single-phase centre tap
ABB Switzerland Ltd, Semiconductors reserves the right to change specifications without notice.
ABB Switzerland Ltd Semiconductors Fabrikstrasse 3 CH-5600 Lenzburg, Switzerland Telephone Fax Email Internet +41 (0)58 586 1419 +41 (0)58 586 1306 abbsem@ch.abb.com www.abb.com/semiconductors
Doc. No. 5SYA1154-02 July 06
很抱歉,暂时无法提供与“5SDD40B0200”相匹配的价格&库存,您可以联系我们找货
免费人工找货