5SDF10H4502

VRRM IF(AV)M IFSM V(T0) rT VDClink = = = = = = 4500 810 24×103 2.42 1.1 2800 V A A V mΩ V Fast Recovery Diode 5SDF 10H4502 PRELIMINARY Doc. No. 5SYA1115-03 Oct. 06 • Patented free-floating technology • Industry standard housing • Cosmic radiation withstand rating • Low on-state and switching losses • Optimized for snubberless operation Blocking Maximum rated values 1) Parameter Repetitive peak reverse voltage Permanent DC voltage for 100 FIT failure rate Permanent DC voltage for 100 FIT failure rate Characteristic values Symbol Conditions VRRM VDC-link VDC-link f = 50 Hz, tp = 10ms, Tvj = 115°C Ambient cosmic radiation at sea level in open air. (100% Duty) Ambient cosmic radiation at sea level in open air. (5% Duty) min typ Value 4500 2800 3200 Unit V V V Parameter Repetitive peak reverse current Symbol Conditions IRRM VR = VRRM, Tvj = 115°C max 30 Unit mA Mechanical data Maximum rated values 1) Parameter Mounting force Acceleration Acceleration Characteristic values Symbol Conditions Fm a a Device unclamped Device clamped min 42 typ 40 max 46 50 200 Unit kN m/s m/s Unit kg mm mm mm 2 2 Parameter W eight Housing thickness Surface creepage distance Air strike distance Symbol Conditions m H DS Da min 26.0 30 20 typ max 0.83 26.4 Note 1 Maximum rated values indicate limits beyond which damage to the device may occur ABB Switzerland Ltd, Semiconductors reserves the right to change specifications without notice. 5SDF 10H4502 On-state Maximum rated values 1) Parameter Max. average on-state current Max. RMS on-state current Max. peak non-repetitive surge current Limiting load integral Max. peak non-repetitive surge current Limiting load integral Characteristic values Symbol Conditions IF(AV)M IF(RMS) IFSM I2t IFSM I2t Symbol Conditions VF V(T0) rT IF = 2200 A, Tvj = 115°C Tvj = 115°C IF = 400...3000 A tp = 1 ms, Tvj = 115°C, VR = 0 V tp = 10 ms, Tvj = 115°C, VR = 0 V Half sine wave, TC = 70 °C min typ max 810 1270 24×10 3 Unit A A A A2s A A2s Unit V V mΩ 2.88×10 40×10 6 3 800×10 min typ max 4.85 2.42 1.1 3 Parameter On-state voltage Threshold voltage Slope resistance Turn-on Characteristic values Parameter Peak forward recovery voltage Symbol Conditions VFRM dIF/dt = 1000 A/µs, Tvj = 115°C min typ max 370 Unit V Turn-off Maximum rated values 1) Parameter Symbol Conditions IFM = 2200 A, Tvj = 115 °C VDC-link = 2800 V min typ max 650 Unit A/µs Max. decay rate of on-state di/dtcrit current Characteristic values Parameter Reverse recovery current Reverse recovery charge Turn-off energy Symbol Conditions IRM Qrr Err IFQ = 2200 A, VDC-Link = 2700 V di/dt = 650 A/µs, LCL = 300 nH CCL = 10 µF, RCL = 0.65 Ω, Tj = 115°C min typ max 1150 2200 4.5 Unit A µC J ABB Switzerland Ltd, Semiconductors reserves the right to change specifications without notice. Doc. No. 5SYA1115-03 Oct. 06 page 2 of 6 5SDF 10H4502 Thermal Maximum rated values Note 1 Parameter Operating junction temperature range Characteristic values Symbol Conditions Tvj min -40 -40 min typ max 115 125 Unit °C °C Unit K/kW K/kW K/kW K/kW K/kW Storage temperature range Tstg Parameter Symbol Conditions Double-side cooled Fm = 42...46 kN Anode-side cooled Fm = 42...46 kN Cathode-side cooled Fm = 42...46 kN Double-side cooled Fm = 42...46 kN Single-side cooled Fm = 42...46 kN typ max 12 24 24 3 6 Thermal resistance junction Rth(j-c) to case Rth(j-c)A Rth(j-c)C Thermal resistance case to Rth(c-h) heatsink Rth(c-h) Analytical function for transient thermal impedance: Zth(j-c) (t) = ∑ R th i (1 - e-t/τ i ) i =1 i Rth i(K/kW) τi(s) 1 7.705 0.5244 2 2.748 0.0633 3 1.009 0.0065 4 0.539 0.0015 n Fig. 1 Transient thermal impedance (junction to case) vs. time in analytical and graphical form (max. values) ABB Switzerland Ltd, Semiconductors reserves the right to change specifications without notice. Doc. No. 5SYA1115-03 Oct. 06 page 3 of 6 5SDF 10H4502 IF [A] 3500 Tj = 115°C 3000 Err [J] 5.0 4.5 4.0 Tj = 115°C diF/dt = 550 A/µs VDClink = 2700 V 2500 3.5 3.0 2.5 2000 1500 2.0 1.5 1.0 1000 500 0.5 0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 0.0 0 500 1000 1500 2000 2500 VF [V] IFQ [A] Fig. 2 Max. on-state voltage characteristics Fig. 3 Upper scatter range of turn-off energy per pulse vs. turn-off current Irr [A] 1400 Tj = 115°C diF/dt = 550 A/µs VDClink = 2700 V 1200 1000 800 600 400 200 0 0 500 1000 1500 2000 2500 IFQ [A] Fig. 4 Upper scatter range of reverse recovery current vs reverse current rise rate Fig. 5 Diode Safe Operating Area ABB Switzerland Ltd, Semiconductors reserves the right to change specifications without notice. Doc. No. 5SYA1115-03 Oct. 06 page 4 of 6 5SDF 10H4502 VF(t), IF (t) dIF/dt VFR IF (t) -dIF/dt IF (t) Qrr VF (t) tfr tfr (typ) 10 µs IRM VR (t) VF (t) t Fig. 6 General current and voltage waveforms Li LCL RS DCL IF VLC CCL DUT LLoad Fig. 7 Test circuit. ABB Switzerland Ltd, Semiconductors reserves the right to change specifications without notice. Doc. No. 5SYA1115-03 Oct. 06 page 5 of 6 5SDF 10H4502 Fig. 8 Outline drawing, all dimensions are in millimeters and represent nominal values unless stated otherwise Related documents: Doc. Nr 5SYA 2036 5SZK 9104 5SZK 9105 Titel Recommendations regarding mechanical clamping of Press Pack High Power Semiconductors Specification of environmental class for pressure contact diodes, PCTs and GTO, STORAGE available on request, please contact factory Specification of environmental class for pressure contact diodes, PCTs and GTO, TRANSPORTATION available on request, please contact factory Please refer to http://www.abb.com/semiconductors for actual versions. ABB Switzerland Ltd, Semiconductors reserves the right to change specifications without notice. ABB Switzerland Ltd Semiconductors Fabrikstrasse 3 CH-5600 Lenzburg, Switzerland Telephone Fax Email Internet +41 (0)58 586 1419 +41 (0)58 586 1306 abbsem@ch.abb.com www.abb.com/semiconductors Doc. No. 5SYA1115-03 Oct. 06