Low voltage AC drives
ABB general purpose drives
ACS310
0.37 to 22 kW/0.5 to 30 hp
Catalog
ACS310 drives for a wide range of variable torque applications
ABB general purpose drive, ACS310 is easy to select and
easy to use. It is enough for most basic applications with no
high overload demands. ACS310 is suitable for wide range of
variable torque applications and simple machines.
The drive’s dedicated pump and fan features lower operating
costs, boost energy efficiency and reduces CO2 emissions.
Included amongs these features are built-in PID controllers
and PFC (pump and fan control) that varies the drive’s
performance in response to changes in pressure, flow or other
external data.
The compact design and uniform dimensions make cabinet
mounting of the drive straightforward, thereby providing
a fast and space saving installation. The ACS310 drives have
an embedded Modbus interface for system monitoring that
saves the cost of external fieldbus devices and enables to
integrate the drives easily with PLC. When combined with
preprogrammed application macros, an intuitive user interface
and several assistant screens, installation time is further
reduced while speeding up parameter setting and drive
commissioning.
Among the pre-programmed protection functions is pump
cleaning. This prevents pump and pipe clogging by initiating
a sequence of forward and reverse runs of the pump to clean
the impeller.
The ACS310 drives meet the needs of OEMs, logistical and
technical distributors as well as the requirements of end
users with pumping and ventilation applications. The drives
are supported by one of the most extensive global sales and
service networks with presence in over 100 countries.
Within pumping applications, energy savings can be
up to 50 percent, compared to direct-on-line motor-driven
systems that use mechanical flow control methods. The ABB
general purpose drives provide built-in features for efficient
energy management. Energy savings can be easily monitored
using the built-in counters that display energy savings in
kilowatt hours and saved carbon dioxide emissions. The
savings can also be displayed in local currencies.
Highlights
−− Powerful set of pump and fan features
−− Boosted energy efficiency
− − Tailored for cabinet installations
− − Clever drive commissioning assistants and convenient user
interface
− − Motor noice smoothing
− − Worldwide availability and service
2 ABB general purpose drives ACS310 | Catalog
Contents
ACS310 drives for a wide range of variable torque applications..............................2
Essentials inside for basic applications..................................................................4
Typical applications...............................................................................................6
How to select a drive............................................................................................7
Ratings and types.................................................................................................8
Technical data......................................................................................................9
Dimensions and weights..................................................................................... 10
Cooling.............................................................................................................. 11
Fuses................................................................................................................. 12
Control connections............................................................................................ 13
Control program example.................................................................................... 14
Options.............................................................................................................. 16
Compact AC500-eCo PLC with ACS310.............................................................23
ABB product offering.......................................................................................... 24
Life cycle services............................................................................................... 26
Catalog | ABB general purpose drives ACS310 3
Essentials inside for basic applications
ACS310 drives are simple and easy with all essentials included for applications with no high overload demand.
Compact design with flexible mounting options saves space and installation time. Short menus and preprogrammed
macros makes commissioning fast and easy. The drives powerful set of pump and fan features reduce
mechanical stress and thus maintenance costs. Within pumping applications, energy savings of up to 50% can be
achieved compared to direct-on-line motor-driven systems that use mechanical flow control methods. Wherever your
machine is located, the local ABB will be there to support you and your clients.
Multipump and -fan control
One drive controls several pumps or fans
and eliminates the need for an external
programmable logic controller. One pump
is drive controlled and auxiliary pumps are
on/off controlled. This reduces the motor
stress and increase lifetime when auxiliary
motors are driven according to the needed
pump/fan capacity. Interlock function
enables one motor to be disengaged from
the mains supply while others continue
operating in parallel.
Compact and space saving design
Compact size, with power range from 0.37
to 22 kW and flexible mounting possibilities
ensure optimized installation in a wide range of
applications, resulting in space and cost
savings.
Quick and easy commissioning
Predefined I/O configurations
for application macros and built-in
assistants speed up commissioning of the
drive, allowing you to concentrate on your
business.
Robust design and quality
ACS310 has coated control boards to
increase robustness. Automatic fault reset
to ensure uninterrupted operation. And
protection against unstable supply networks.
Energy optimizer
Intelligent drive control method
improving the energy efficiency and
system operation, especially while
operating on partial centrifugal loads.
4 ABB general purpose drives ACS310 | Catalog
Load analyzer
Built-in statistical tool that saves process data, such as
current and torque values, which can be used to analyze
and optimise the process. It can also be used for
following system behaviour before and after any
system modifications.
Powerful set of pump and fan features
Integrated and preprogrammed features like
pump cleaning, pipefill, inlet/outlet pressure
supervision and detection of under or overload
improve system reliability and lifetime. Built-in
PFC feature can eliminate the need for an
external programmable logic controller (PLC).
Internal Modbus EIA-485 connection
Built-in terminals and connectivity for
Modbus RTU as standard enables the
system control and monitoring in the most
user friendly and cost effective way.
Relay extension module MREL-01
The optional MREL-01 module offers
three additional relay outputs. The
outputs can be configured for different
functions by setting selected parameters
eg, for multipump/-fan control.
Remote monitoring
Optional SREA-01 module enables
remote monitoring and access to
drive’s parameters and process via web
browser. It enables sending log files,
alarms and events by E-mail and SMS.
Additionally SREA-01 offers Modbus
TCP connectivity to ACS310.
FlashDrop tool
FlashDrop is a powerful palm sized drive
configuration tool that copies a pre-defined
drive parameter set into a drive in 2 seconds
without a power connection to the drive.
Catalog | ABB general purpose drives ACS310 5
Typical applications
The ACS310 drive is specifically designed to meet the variable
torque loads demanded by centrifugal fans and pumps. The
result is maximum application uptime, reduced maintenance
cost and higher energy savings.
Irrigation systems, whether agricultural, horticultural or those
used on golf courses, have a common demand for a reliable
and efficient flow of water.
The built-in real-time clock provides true time and date stamps
that control the start and stop times of watering based on the
daily demand profile. Soft pipe filling provides a pump with
soft-start, enabling a smooth build-up of flow in pipes while
increasing the life time of the pipe work and pumping system.
A booster pump system is designed to boost supplied water
pressure to a predetermined level in water and wastewater
plants. The ACS310 drive features pump and fan control (PFC)
for use where several parallel pumps are operated together and
the required flow rate is variable.
PID control is available to allow the process to accurately
maintain a pressure setpoint by adjusting the control outputs,
thus allowing for precise control within difficult processes.
A sleep & boost function detects slow rotation and runs the
pump to boost pressure prior to shutdown. The pressure
6 ABB general purpose drives ACS310 | Catalog
is continuously monitored and pumping restarts when the
pressure falls below the minimum level.
Level control is used to adjust the filling or emptying of storage
tanks. Storage tanks may be located within processes such as
pulp and paper for supplying process fluids like wastewater.
The drive has signal supervision for level control and a pipe
cleaning feature, thereby preventing solids from building up on
pumps impellers or the tank walls.
Storage tanks are often mounted in narrow locations, with
limited space for components like AC drives. The compact size
and various mounting methods of the ACS310 drives enables
easy installation and space savings in new installations and
retrofits.
Wood drying kilns have a high demand for powerful and
efficient ventilation to dry out the wood. In wood kilns
centrifugal fans and AC drives are used to control the air flow
demand. To increase the kilns´ capacity, multiple fans may be
controlled via one drive by using the pump and fan control
(PFC) feature. At the start of the drying process, the relative
humidity is high thus there is a demand for higher air flow
rates. As the wood dries out the auxiliary fans may shut-down,
thereby saving energy and reducing maintenance.
How to select a drive
It is very easy to select the right drive.
3
This is how you build up your own ordering code using the
type designation key.
Select your drive’s ordering code from
the rating table based on your motor’s
nominal power rating.
Type designation
ACS310-01X-02A4-2
ACS310-01X-04A7-2
ACS310-01X-06A7-2
ACS310-01x-07A5-2
1
Start with identifying your supply
voltage. This tells you what rating table
to use. See page 8.
ACS310-01x-09A8-2
ACS310-03X-02A6-2
ACS310-03X-03A9-2
ACS310-03X-05A2-2
ACS310-03X-07A4-2
ACS310-03X-08A3-2
ACS310-03X-10A8-2
ACS310-03X-14A6-2
ACS310-03X-19A4-2
ACS310-03X-26A8-2
ACS310-03X-34A1-2
ACS310-03X-50A8-2
ACS310-03X-01A3-4
ACS310-03X-02A1-4
2
ACS310-03X-02A6-4
ACS310-03X-03A6-4
Choose your motor’s power and current
rating from the ratings table on page 8.
ACS310-03X-04A5-4
ACS310-03X-06A2-4
ACS310-03X-08A0-4
ACS310-03X-09A7-4
ACS310-03X-13A8-4
Ratings
ACS310-03X-17A2-4
PN
PN
I2N
kW
hp
A
1)
ILD
ACS310-03X-25A4-4
2)
1-phase AC supply, 200 to 240 V
0.37
0.5
2.4
2.3
0.75
1.0
4.7
4.5
1.1
1.5
6.7
6.5
1.5
2.0
7.5
7.2
2.2
3.0
9.8
9.4
3-phase AC supply, 200 to 240 V
2.6
2.4
0.37
0.5
0.55
0.75
3.9
3.5
0.75
1.0
5.2
4.7
1.1
1.5
7.4
6.7
1.5
2.0
8.3
7.5
2.2
3.0
10.8
9.8
3.0
4.0
14.6
13.3
4.0
5.0
19.4
17.6
5.5
7.5
26.8
24.4
7.5
10.0
34.1
31.0
11.0
15.0
50.8
46.2
ACS310-03X-34A1-4
Page 8
A
4
ACS310-03X-41A8-4
ACS310-03X-48A4-4
Choose your options (on pages 16 to 23) and add the
option codes to drive’s ordering code.
Remember to use a “+” mark before each option code.
Control panel
J400
Assistant control panel
ACS-CP-A
J404
Basic control panel
ACS-CP-C
3-phase AC supply, 380 to 480 V
1.3
1.2
0.37
0.5
Page 8
0.55
0.75
2.1
1.9
0.75
1.0
2.6
2.4
1.1
1.5
3.6
3.3
1.5
2.0
4.5
4.1
2.2
3.0
6.2
5.6
3.0
4.0
8.0
7.3
4.0
5.0
9.7
8.8
5.5
7.5
13.8
12.5
7.5
10.0
17.2
15.6
11.0
15.0
25.4
23.1
15.0
20.0
34.1
31
18.5
25.0
41.8
38
22.0
30.0
48.4
44
Pages 16 to 23
4
3
Type designation:
ACS310
-
0XX
-
XXXX
-
2
+
XXXX
Product series
Constructions
Rating and types
Voltage
Options
Catalog | ABB general purpose drives ACS310 7
Ratings and types
Type designation
This is the unique reference number (shown above and in
column 5. left) that clearly identifies the drive by power rating
and frame size. Once the drive’s type designation has been
selected, the frame size (column 6) can be used to determine
the drive dimensions, shown on 10.
Voltages
ACS310 is available in two voltage ranges:
2 = 200 to 240 V
4 = 380 to 480 V
Construction
“XXE” within the type designation (shown above) varies
depending on the drive phase and EMC filtering. Choose
below the one you need.
01 = 1-phase
03 = 3-phase
E = EMC filter connected, 50 Hz frequency
U = EMC filter disconnected, 60 Hz frequency
(In case the filter is required it can easily be connected.)
Insert either “2” or “4”, depending on your chosen voltage,
into the type designation shown above.
Ratings
Type designation
PN
PN
I2N
kW
hp
A
1)
ILD
2)
Frame
size
A
1-phase AC supply, 200 to 240 V
0.37
0.5
2.4
2.3
ACS310-01X-02A4-2
R0
0.75
1.0
4.7
4.5
ACS310-01X-04A7-2
R1
1.1
1.5
6.7
6.5
ACS310-01X-06A7-2
R1
1.5
2.0
7.5
7.2
ACS310-01x-07A5-2
R2
2.2
3.0
9.8
9.4
ACS310-01x-09A8-2
R2
3-phase AC supply, 200 to 240 V
2.6
2.4
0.37
0.5
ACS310-03X-02A6-2
R0
3.5
ACS310-03X-03A9-2
R0
0.55
0.75
3.9
0.75
1.0
5.2
4.7
ACS310-03X-05A2-2
R1
1.1
1.5
7.4
6.7
ACS310-03X-07A4-2
R1
1.5
2.0
8.3
7.5
ACS310-03X-08A3-2
R1
2.2
3.0
10.8
9.8
ACS310-03X-10A8-2
R2
3.0
4.0
14.6
13.3
ACS310-03X-14A6-2
R2
4.0
5.0
19.4
17.6
ACS310-03X-19A4-2
R2
5.5
7.5
26.8
24.4
ACS310-03X-26A8-2
R3
7.5
10.0
34.1
31.0
ACS310-03X-34A1-2
R4
11.0
15.0
50.8
46.2
ACS310-03X-50A8-2
R4
3-phase AC supply, 380 to 480 V
1.3
1.2
0.37
0.5
ACS310-03X-01A3-4
R0
0.55
0.75
2.1
1.9
ACS310-03X-02A1-4
R0
0.75
1.0
2.6
2.4
ACS310-03X-02A6-4
R1
1.1
1.5
3.6
3.3
ACS310-03X-03A6-4
R1
1.5
2.0
4.5
4.1
ACS310-03X-04A5-4
R1
2.2
3.0
6.2
5.6
ACS310-03X-06A2-4
R1
3.0
4.0
8.0
7.3
ACS310-03X-08A0-4
R1
4.0
5.0
9.7
8.8
ACS310-03X-09A7-4
R1
5.5
7.5
13.8
12.5
ACS310-03X-13A8-4
R3
7.5
10.0
17.2
15.6
ACS310-03X-17A2-4
R3
11.0
15.0
25.4
23.1
ACS310-03X-25A4-4
R3
15.0
20.0
34.1
31
ACS310-03X-34A1-4
R4
18.5
25.0
41.8
38
ACS310-03X-41A8-4
R4
22.0
30.0
48.4
44
ACS310-03X-48A4-4
R4
8 ABB general purpose drives ACS310 | Catalog
X within the type code stands for E or U.
1)
I2N maximum continuous output current at ambient temperature of +40 °C.
No overloadability, derating 1% for every additional 1 °C up to +50 °C.
2)
ILD continuous output current at max ambient temperature of +50 °C.
10% overloadability for one minute every ten minutes.
Technical data
Mains connection
Voltage and
power range
Frequency
Programmable control connections
1-phase, 200 to 240 V ± 10%
0.37 to 2.2 kW (0.5 to 3 hp)
3-phase, 200 to 240 V ± 10%
0.37 to 11 kW (0.5 to 15 hp)
3-phase, 380 to 480 V ± 10%
0.37 to 22 kW (0.5 to 30 hp)
48 to 63 Hz
Motor connection
Voltage
3-phase, from 0 to Usupply
Frequency
0 to 500 Hz
Continuous loading
capability
I2N maximum continuous output current
at ambient temperature of +40 °C.
No overloadability, derating 1% for every
additional 1 °C up to 50 °C.
I LD continuous output current at max
ambient temperature of +50 °C.
10% overloadability for one minute every
ten minutes.
At start 1.6 x I2N for 2 s
Two analog inputs
Voltage signal
Unipolar
Bipolar
Current signal
Unipolar
Bipolar
Resolution
Accuracy
0 (4) to 20 mA, R in = 100 Ω
-20 to 20 mA, R in = 100 Ω
0.1%
± 1%
One analog output
0 (4) to 20 mA, load < 500 Ω
Auxiliary voltage
24 V DC ± 10%, max. 200 mA
Five digital inputs
Input impedance
12 to 24 V DC with internal or external
supply, PNP and NPN, pulse train
0 to 16 kHz
2.4 kΩ
One relay output
Type
Maximum switching voltage
Maximum switching current
Maximum continuous current
NO + NC
250 V AC/30 V DC
0.5 A/30 V DC; 5 A/230 V AC
2 A rms
Transistor output
30 V DC
100 mA/30 V DC, short circuit
10 Hz to 16 kHz
1 Hz
0.2%
Switching frequency
Default
Selectable
4 kHz
4 to 16 kHz with 4 kHz steps
Acceleration time
0.1 to 1800 s
Deceleration time
0.1 to 1800 s
Motor control method
Scalar U/f
One digital output
Type
Maximum switching voltage
Maximum switching current
Frequency
Resolution
Accuracy
-10 to 50 oC (14 to 122 oF), no frost
allowed
Fieldbus
Cable
Rated current available at 0 to 1000 m
(0 to 3281 ft) reduced by 1% per 100 m
(328 ft) over 1000 to 2000 m
(3281 to 6562 ft)
Termination
Isolation
Transfer rate
Communication type
Protocol
Environmental limits
Ambient temperature
Altitude
Output current
0 (2) to 10 V, R in > 312 kΩ
-10 to 10 V, R in > 312 kΩ
Serial communication
Modbus EIA-485, embedded
Shielded twisted pair, impedance 100 to
150 ohms
Daisy-chained bus, without dropout lines
Bus interface isolated from drive
1.2 to 76.8 kbit/s
Serial, asynchronous, half duplex
Modbus
Relative humidity
Lower than 95% (without condensation)
Degree of protection
IP20/optional NEMA 1 enclosure
Chokes
Enclosure colour
NCS 1502-Y, RAL 9002, PMS 420 C
AC input chokes
Contamination levels
IEC721-3-3
No conductive dust allowed
Class 1C2 (chemical gases)
Class 1S2 (solid particles)
Class 2C2 (chemical gases)
Class 2S2 (solid particles)
Class 3C2 (chemical gases)
Class 3S2 (solid particles)
External option
For reducing THD in partial loads and to
comply with EN/IEC 61000-3-12
AC output chokes
External option
To achieve longer motor cables
Transportation
Storage
Operation
Product compliance
Low Voltage Directive 2006/95/EC
Machinery Directive 2006/42/EC
EMC Directive 2004/108/EC
Quality assurance system ISO 9001
Environmental system ISO 14001
UL, cUL, CE, C-Tick and GOST R approvals
RoHS compliant
Catalog | ABB general purpose drives ACS310 9
Dimensions and weights
Cabinet-mounted drives (IP20 UL open)
Frame size
H1 =
H2 =
H3 =
W =
D =
IP20 UL open
H1
H2
H3
W
D
mm
mm
mm
mm
mm
Weight
kg
R0
169
202
239
70
161
1.1
R1
169
202
239
70
161
1.3
R2
169
202
239
105
165
1.5
R3
169
202
236
169
169
2.9
R4
181
202
244
260
169
4.4
H1
H2
H3
Height without fastenings and clamping plate
Height with fastenings but without clamping plate
Height with fastenings and clamping plate
Width
Depth
D
W
Wall-mounted drives (NEMA 1)
Frame size
H4 =
H5 =
W =
D =
NEMA 1
H4
H5
W
D
mm
mm
mm
mm
kg
R0
257
280
70
169
1.5
R1
257
280
70
169
1.7
R2
257
282
105
169
1.9
R3
260
299
169
177
3.5
R4
270
320
260
177
5.0
Height with fastenings and NEMA 1 connection box
Height with fastenings, NEMA 1 connection box and hood
Width
Depth
Weight
H4
H5
D
W
10 ABB general purpose drives ACS310 | Catalog
Cooling
ACS310 is fitted with cooling fans as standard. The cooling
air must be free from corrosive substances and must not be
above the maximum ambient temperature of 50 °C. For more
specific limits see the Technical data - Environmental limits in
this catalog.
Cooling air flow
Type designation
Free space requirements
Frame
Heat dissipation
Air flow
Enclosure type
Space above
Space below
Space on left/right
All frame sizes
mm
75
mm
75
mm
0
size
3
[W]
BTU/hr 1)
m /h
3
ft /min
1-phase AC supply, 200 to 240 V
2)
2)
ACS310-01X-02A4-2
R0
48
163
-
ACS310-01X-04A7-2
R1
72
247
24
14
ACS310-01X-06A7-2
R1
97
333
24
14
ACS310-01X-07A5-2
R2
101
343
21
12
ACS310-01X-09A8-2
R2
124
422
21
12
42
142
-
2)
-
2)
2)
-
2)
-
3-phase AC supply, 200 to 240 V
ACS310-03X-02A6-2
R0
ACS310-03X-03A9-2
R0
54
183
-
ACS310-03X-05A2-2
R1
64
220
24
14
ACS310-03X-07A4-2
R1
86
295
24
14
ACS310-03X-08A3-2
R1
88
302
21
12
ACS310-03X-10A8-2
R2
111
377
21
12
ACS310-03X-14A6-2
R2
140
476
52
31
ACS310-03X-19A4-2
R2
180
613
52
31
ACS310-03X-26A8-2
R3
285
975
71
42
ACS310-03X-34A1-2
R4
328
1119
96
57
ACS310-03X-50A8-2
R4
488
1666
96
57
35
121
-
2)
-
2)
2)
-
2)
3-phase AC supply, 380 to 480 V
ACS310-03X-01A3-4
R0
ACS310-03X-02A1-4
R0
40
138
-
ACS310-03X-02A6-4
R1
50
170
13
8
ACS310-03X-03A6-4
R1
60
204
13
8
ACS310-03X-04A5-4
R1
69
235
13
8
ACS310-03X-06A2-4
R1
90
306
19
11
ACS310-03X-08A0-4
R1
107
364
24
14
ACS310-03X-09A7-4
R1
127
433
24
14
ACS310-03X-13A8-4
R3
161
551
52
31
ACS310-03X-17A2-4
R3
204
697
52
31
ACS310-03X-25A4-4
R3
301
1029
71
42
ACS310-03X-34A1-4
R4
408
1393
96
57
ACS310-03X-41A8-4
R4
498
1700
96
57
ACS310-03X-48A4-4
R4
588
2007
96
57
X within the type designation stands for E or U.
1)
BTU/hr = British Thermal Unit per hour. BTU/hr is approximately 0.293 Watts.
2)
Frame size R0 with free convection cooling.
Catalog | ABB general purpose drives ACS310 11
Fuses
Fuses
Standard fuses can be used with ACS310 drives for branch
circuit protection. Use the following table for selecting the
correct input fuse for each drive.
Selection table
Type designation
Frame
size
IEC fuses
UL fuses
Fuse
type
Fuse
1)
max [A]
type
1)
max [A]
1-phase AC supply, 200 to 240 V
ACS310-01X-02A4-2
R0
10
gG
10
UL class T
ACS310-01X-04A7-2
R1
16
gG
20
UL class T
ACS310-01X-06A7-2
R1
16
gG
25
UL class T
ACS310-01X-07A5-2
R2
20
gG
30
UL class T
ACS310-01X-09A8-2
R2
25
gG
35
UL class T
3-phase AC supply, 200 to 240 V
ACS310-03X-02A6-2
R0
10
gG
10
UL class T
ACS310-03X-03A9-2
R0
10
gG
10
UL class T
ACS310-03X-05A2-2
R1
10
gG
15
UL class T
ACS310-03X-07A4-2
R1
16
gG
15
UL class T
UL class T
ACS310-03X-08A3-2
R1
16
gG
15
ACS310-03X-10A8-2
R2
16
gG
20
UL class T
ACS310-03X-14A6-2
R2
25
gG
30
UL class T
ACS310-03X-19A4-2
R2
25
gG
35
UL class T
ACS310-03X-26A8-2
R3
63
gG
60
UL class T
ACS310-03X-34A1-2
R4
80
gG
80
UL class T
ACS310-03X-50A8-2
R4
100
gG
100
UL class T
3-phase AC supply, 380 to 480 V
ACS310-03X-01A3-4
R0
10
gG
10
UL class T
ACS310-03X-02A1-4
R0
10
gG
10
UL class T
ACS310-03X-02A6-4
R1
10
gG
10
UL class T
ACS310-03X-03A6-4
R1
10
gG
10
UL class T
ACS310-03X-04A5-4
R1
16
gG
15
UL class T
ACS310-03X-06A2-4
R1
16
gG
15
UL class T
ACS310-03X-08A0-4
R1
16
gG
20
UL class T
ACS310-03X-09A7-4
R1
20
gG
25
UL class T
ACS310-03X-13A8-4
R3
25
gG
30
UL class T
ACS310-03X-17A2-4
R3
35
gG
35
UL class T
UL class T
ACS310-03X-25A4-4
R3
50
gG
50
ACS310-03X-34A1-4
R4
80
gG
80
UL class T
ACS310-03X-41A8-4
R4
100
gG
100
UL class T
ACS310-03X-48A4-4
R4
100
gG
100
UL class T
The rated fuse currents given in the table are the maximums for the
mentioned fuse types.
X within the type designation stands for E or U.
*)
According to IEC-60269 standard.
For U.S. market please see ACS310 U.S. catalog.
12 ABB general purpose drives ACS310 | Catalog
Control connections
Application macros
Application macros are preprogrammed parameter sets. While
starting up the drive, the user typically selects one of the
macros that is best suited for the application. The diagram
below gives an overview of ACS310 control connections
and shows the default I/O connections for the ABB standard
macro.
−−
−−
−−
−−
−−
−−
−−
−−
−−
In addition to the standard macros, the user can create three
user macros. The user macro allows the user to save the
parameter settings for later use.
The diagram below gives an overview of ACS310 control
connections. Please refer to the ACS310 user’s manual for
more detailed information.
ABB standard macro
3-wire macro
Alternative macro
Motor potentiometer
Hand/auto macro
PID control macro
PFC control macro
SPFC control macro
Modbus application macro
Typical I/O connections
8
ACS310: X1
Control panel
(RJ-45)
1
SCR
Analog input 1
2
AI1
3
GND
0 to 10 V
Ramp Const. Fwd/
pair sel Speed 1 Rev
S1
AI1
AI2
Screen
Reference voltage
+10 V DC, max 10 mA
4
mA
V
+10 V
Analog input 2
5
AI2
6
GND
9
+24 V
10
GND
Aux. voltage output
+24 V DC, max. 200 mA
PROGRAMMABLE
DIGITAL INPUTS
DI5 can also be used
11
DCOM
12
DI1
13
DI2
14
DI3
15
DI4
16
DI5
23
SHIELD
24
B J701
25
A
26
GND_A
GND
11 DCOM
12 DI1
13 DI2
14 DI3
15 DI4
16 DI5
PROGRAMMABLE RELAY
AND DIGITAL OUTPUTS
DI configuration NPN connected (sink)
ROCOM
Relay output
250 V AC/30 V DC/6 A
RONC
RONO
+ 24 V
ACS310: X1
9
DOSRC
Digital/frequency output,
PNP transistor type
30 V DC, max. 100 mA
DOOUT
DOGND
Const.
speed 1
Fwd/ Start/
Rev Stop
6
11 DCOM
12 DI1
14 DI3
Output relay
module MREL-01
15 DI4
0V
EMC
EMC filter grounding screw
VAR
Varistor grounding screw
PE
PE
L1
U1
U2
L2
V1
V2
L3
W1
W2
EMC
filter
+24 V
10 GND
13 DI2
FlashDrop
3-phase
Input
power supply, choke
200 to
480 V AC
+24 V
10 GND
Analog output
0 to 20 mA
AO
as a frequency input
Modbus RTU
(EIA-485)
9
Start/
Stop
16 DI5
DI configuration PNP connected (source) with external
power supply
M
3~
AC motor
Output
choke
Catalog | ABB general purpose drives ACS310 13
Control program example
One of the ACS310’s integrated pump and fan features is
soft pump and fan control (SPFC), which is used for pump
and fan alternation applications where lower pressure
peaks are desirable when a new auxiliary motor is
connected on-line.The following example explains how
ACS310 can operate up to 4 to 5 pumps or fans in parallel
based on the capacity demand. In this example, we use
three parallel pumps to maintain the water pressure in the
pipelines.
The drive controls the motor of pump 1, varying the motor
speed to control the pump capacity. This motor is the
speed regulated motor. When the demand exceeds that of the
first motor’s, the drive automaticly starts an auxiliary pump.
The speed of the first pump is adjusted so that the actual
value follows the process reference.
Parameter settings
Before starting the configuration, ensure that the drive has
been installed properly and that the electrical connections are
complete. Connection example can be found from ACS310
User’s manual.
Startup data
The correct motor parameters are set within parameter group
99. Then select SPFC control macro using parameter 9902.
This software macro updates the defined list of parameter
values to their default values.
14 ABB general purpose drives ACS310 | Catalog
Pump and fan control parameters
Parameters can be found in parameter group 81. First change
Short menu to to Long from parameter 1611 in group 16. This
shows the full parameter group list including group 81.
Frequency limits to start and stop auxiliary motors
Parameter 8109 START FREQ 1 is set to 50 Hz, which is
also the default value. Since we have in this example also
another auxiliary motor, parameter 8110 START FREQ 2
is set to 50 Hz for the second auxiliary motor.
To stop an axiliary motor we set parameters 8112 LOW
FREQ 1 and 8113 LOW FREQ 2 to 25 Hz.
Auxiliary motors start and stop delay
Delay stabilizes the contactors before starting or stopping a
motor.
Parameter 8115 AUX MOT START D is left to its default
value 5 s. Parameter 8116 AUX MOT STOP D is left to it’s
default value 20 s.
Number of auxiliary motors and motors in total
Parameter 8117 NR OF AUX MOT is set to 2. Parameter
8127 MOTORS is set to 3.
Autochange functionality for SPFC
The Autochange functionality for SPFC equalizes duty time
between multiple motors, when auxiliary motors are not
running. The time interval between motor changes is
managed with parameter 8118.
Start delay for speed controlled motor
Parameter 8122 PFC START DELAY is left to its default
value 0,5 s.
Enabling pump and fan control
Parameter 8123 PFC ENABLE is set to 3 (SPFC +
AUTOCHANGE)
Relay configuration
Relay configuration depends how many and how the
motors are connected.
Note! The macro SPFC already sets Transistor output
parameter 1805 DO SIGNAL to PFC as an additional
relay output which is connected.
Parameter 1401 RELAY OUTPUT 1 is set to PFC
Parameter 1402 RELAY OUTPUT 2 is set to PFC
Interlocks
Interlock detects if any of the pumps are unavailable and
starts the next available pump, when used. Set parameter
8120 INTERLOCKS to take input from DI3 in this example
(depends of the number of interlocks and how thay are
connected).
Default I/O settings
1. Hand: 0…10 V -> 0…50 Hz.
PID/PFC: 0…10 V ->
0…100% PID setpoint.
2. 360 degree grounding under
a clamp.
3. The signal source must be
powered externally. See the
manufacturer’s instructions.
Catalog | ABB general purpose drives ACS310 15
Options
How to select options
The options shown in the table below are available within
the ACS310 range. The control panels have an associated
4-figure option code, which is shown in the second column.
It is this code that replaces XXXX in the type code above.
Options
Ordering code
Description
Model
Protection class
68566398 *)
NEMA 1/UL type 1 (R0, R1, R2)
MUL1-R1
NEMA 1/UL type 1 (R3)
MUL1-R3
NEMA 1/UL type 1 (R4)
MUL1-R4
68566410 *)
3AUA0000023888
Control panel
Panel mounting kit
J400
Assistant control panel
ACS-CP-A
J404
Basic control panel
ACS-CP-C
Panel mounting kit
ACS/H-CP-EXT
Panel holder mounting kit
OPMP-01
Relay output extension module. Option includes three (3)
MREL-01
68294673
*)
3AUA0000013086
Extension modules
*)
*)
L511
additional relay outputs.
Tools
External options
Remote monitoring
*)
1)
68566380 *)
FlashDrop tool
MFDT-01
64532871
DriveWindow Light
DriveWindow Light
*)
*)
Input chokes
*)
EMC filters
*)
Output chokes
3AUA0000039179 *)
Ethernet adapter
To be ordered as separate item
The ACS310 is compatible with ACS-CP-C basic control panel Rev M or later.
The ACS310 is compatible with ACS-CP-A assistant control panel Rev E or later.
(New panel series manufactured since 2007 with serial number
XYYWWRXXXX, where year Y = 7 or greater and revision R = E, F, G, …)
2)
16 ABB general purpose drives ACS310 | Catalog
SREA-01
Options
Interface
User interface
Panel cover
The purpose of the panel cover is to protect the drive’s
connection surfaces.The ACS310 drive is delivered with a
panel cover as standard. In addition, there are two alternative
control panels available as options.
Basic control panel
The basic control panel features a single line numeric display.
The panel can be used to control the drive, set parameter
values or copy them from one drive to another.
Assistant control panel
The assistant control panel features a multilingual alphanumeric
display for easy drive programming. The control panel has
various assistants and an built-in help function to guide the
user. It includes a real time clock, which can be used during
fault logging and in controlling the drive, such as at start/stop.
The control panel can be used for copying parameters for
back up or for downloading to another drive. A large graphical
display and soft keys make it extremely easy to navigate.
Panel mounting kits
To attach the control panel to the outside of a larger enclosure,
two panel mounting kits are available. A simple and costefficient installation is possible with the ACS/H-CP-EXT
kit, while the OPMP-01 kit provides a more user-friendly
solution, including a panel platform that enables the panel to
be removed in the same way as a drive-mounted panel. The
panel mounting kits include all hardware required, including
3 meters extension cables and installation instructions.
Basic control panel
Panel cover (included as standard)
Assistant control panel
Panel holder mounting kit OPMP-01
Protection and installation
NEMA 1 kit
The NEMA 1 kit includes a connection box for finger protection,
conduit tube installation, and a hood for protection against
dirt and dust.
Terminal cover
(included as standard)
Terminal cover
The terminal cover is for protection of the I/O connections.
Clamping plates
The clamping plates are used for protection against electrical
disturbances. The clamping plates with the clamps are
included in the drive package as standard.
NEMA 1 kit
Clamping plates
(included as standard)
Catalog | ABB general purpose drives ACS310 17
Options
User interfaces
Removable clip for
labeling
Serial communication
The embedded Modbus EIA-485 fieldbus brings connectivity
to major automation systems. A single twisted pair cable
avoids large amounts of conventional cabling, thereby reducing
costs and increasing system reliability.
Modbus TCP to Modbus RTU gateway
Additionally SREA-01 Ethernet adapter offers Modbus TCP
to Modbus RTU gateway functionality which enables Modbus
TCP connectivity to ACS310. Please refer to SREA-01 user’s
guide for more detailed information.
Extension module
MREL-01
ACS310 has one relay output as standard. The optional
MREL-01 module offers three additional relay outputs. The
outputs can be configured for different functions by setting
selected parameters.
Panel connector
MREL-01 connector
FlashDrop connection
EMC filter
grounding screw
(EMC)
Varistor
grounding screw
(VAR)
LEDs
Fieldbus connection
Modbus EIA-485
Analog I/O
Relay output
Digital output
Digital inputs
SREA-01 Ethernet adapter
SREA-01 Ethernet adapter with remote monitoring access
can send process data, data logs and event messages
independently, without a PLC or a dedicated on-site
computer. It has an internal web server for configuration and
drive access.
In remote locations without qualified service people on-site
it is vital to be able to monitor the drive remotely. Monitoring
and diagnostics routines can be easily implemented with
ABB’s remote monitoring tool. The remote monitoring tool
enables the connection of multiple drives to Ethernet,
to collect operational data from the process and send the
collected data to a central location for process monitoring
and further analysis.
Extension module MREL-01
18 ABB general purpose drives ACS310 | Catalog
SREA-01 Ethernet adapter
Options
Software tools
A separate order line and type designation is required for
any of these software tool options.
DriveWindow Light
DriveWindow Light is an easy-to-use startup and maintenance
tool for ACS310 drives. It can be used in an offline mode,
which enables parameter setting at the office even before
going to the actual site. The parameter browser enables
viewing, editing and saving of parameters. The parameter
comparison feature makes it possible to compare parameter
values between the drive and saved parameter files. With the
parameter subset you can create your own parameter sets.
Controlling the drive is one of the features in DriveWindow
Light. With this software tool, you can monitor up to four
signals simultaneously. This can be done in both graphical
and numerical format. DriveWindow Light version 2.9 or later
is compatible with ACS310 drives.
Highlights
−− Editing, saving and downloading parameters
− − Graphical and numerical signal monitoring
− − Drive control
−− Startup wizards
DriveWindow Light requirements
− − Windows NT/2000/XP/Vista/Windows 7
−− Serial port from a PC
− − Control panel connector
Startup wizards
Startup wizards make the setting of parameters easy. Simply
launch the wizard, select an appropriate assistant eg, for
setting analog outputs, and all parameters related to this
function are shown together with help pictures.
Catalog | ABB general purpose drives ACS310 19
Options
External
A separate order line and type designation is required for
any of these external options.
FlashDrop tool
FlashDrop is a powerful palm sized tool for fast and easy
parameter selecting and setting. It gives the possibility to
hide selected parameters to protect the machine. Only the
parameters needed in the application are shown. The tool can
copy parameters between two drives or between a PC and a
drive. All the above can be done without a power connection to
the drive – in fact, it is not even necessary to unpack the drive.
FlashDrop package includes
− − FlashDrop tool
− − DrivePM software on a CD-rom
− − User’s manual in English and in pdf-format on the CD-rom
− − Cable OPCA-02 for connection between the PC and
FlashDrop tool
− − Battery charger
DrivePM
DrivePM (Drive parameter manager) is a tool to create, edit
and copy parameter sets for FlashDrop. For each parameter/
group the user has a possibility to hide it, which means
that the drive user does not see the parameter/group at all.
DrivePM version 1.2 is compatible with ACS310 drives.
DrivePM requirements
−− Windows 2000/XP/Vista/Windows 7
− − Serial port from a PC
FlashDrop tool
20 ABB general purpose drives ACS310 | Catalog
Options
External
A separate order line and type designation is required for
any of these external options.
Input chokes
An input choke smoothens the wave shape of mains current
and reduces total harmonic distortion (THD). Together
with the input choke, the ACS310 is designed to fulfill the
requirements of the harmonics standard EN/IEC 61000-3-12.
In addition, the input choke provides improved protection
against mains voltage transients.
Type
Frame
Input
I 1N
I 1N
designation
size
choke
without
with
ACS310-
choke
[A]
choke
I TH
L
[A]
Frame
size
Output choke
Cable length
[m]
[mH]
1-phase AC supply, 200 to 240 V
1-phase AC supply, 200 to 240 V
01X-02A4-2
R0
CHK-A1
6.1
4.5
5
8.0
01X-02A4-2
R0
ACS-CHK-B3
60
01X-04A7-2
R1
CHK-B1
11.4
8.1
10
2.8
01X-04A7-2
R1
ACS-CHK-B3
100
01X-06A7-2
R1
CHK-C1
16.1
11
16
1.2
01X-06A7-2
R1
ACS-CHK-C3
100
01X-07A5-2
R2
CHK-C1
16.8
12
16
1.2
01X-07A5-2
R2
ACS-CHK-C3
100
01X-09A8-2
R2
CHK-D1
21
15
25
1.0
01X-09A8-2
R2
ACS-CHK-C3
100
60
3-phase AC supply, 200 to 240 V
3-phase AC supply, 200 to 240 V
03X-02A6-2
R0
CHK-01
4.7
2.6
4.2
6.4
03X-02A6-2
R0
ACS-CHK-B3
03X-03A9-2
R0
CHK-02
6.7
3.5
7.6
4.6
03X-03A9-2
R0
ACS-CHK-B3
60
03X-05A2-2
R1
CHK-03
8.4
4.2
13
2.7
03X-05A2-2
R1
ACS-CHK-B3
100
03X-07A4-2
R1
CHK-03
13
6.1
13
2.7
03X-07A4-2
R1
ACS-CHK-C3
100
03X-08A3-2
R1
CHK-04
13.2
6.9
22
1.5
03X-08A3-2
R1
ACS-CHK-C3
100
03X-10A8-2
R2
CHK-04
15.7
9.2
22
1.5
03X-10A8-2
R2
ACS-CHK-C3
100
03X-14A6-2
R2
CHK-04
23.9
13
22
1.5
03X-14A6-2
R2
NOCH-0016-6x
100
03X-19A4-2
R2
CHK-04
27.3
13.3
22
1.5
03X-19A4-2
R2
NOCH-0016-6x
100
03X-26A8-2
R3
CHK-06
45
20.9
47
0.7
03X-26A8-2
R3
NOCH-0030-6x
100
03X-34A1-2
R4
CHK-06
55
26.2
47
0.7
03X-34A1-2
R4
NOCH-0030-6x
100
03X-50A8-2
R4
CHK-06
76
41
47
0.7
03X-50A8-2
R4
NOCH-0070-6x
100
3-phase AC supply, 380 to 480 V
1)
Type
designation
ACS310-
1)
[A]
Output chokes
An output choke decreases du/dt on the output and filters
current spikes caused by voltage spikes. With an output
choke it is possible to increase the motor cable length
which could be otherwise limited due to a temperature
increase resulting from current spikes and electromagnetic
performance.
3-phase AC supply, 380 to 480 V
03X-01A3-4
R0
CHK-01
2.4
1.3
4.2
6.4
03X-01A3-4
R0
ACS-CHK-B3
03X-02A1-4
R0
CHK-01
4.9
2
4.2
6.4
03X-02A1-4
R0
ACS-CHK-B3
60
03X-02A6-4
R1
CHK-01
4.5
2.5
4.2
6.4
03X-02A6-4
R1
ACS-CHK-B3
100
60
03X-03A6-4
R1
CHK-01
6.6
3.5
4.2
6.4
03X-03A6-4
R1
ACS-CHK-B3
100
03X-04A5-4
R1
CHK-02
7.6
3.8
7.6
4.6
03X-04A5-4
R1
ACS-CHK-C3
100
03X-06A2-4
R1
CHK-02
10.6
5.3
7.6
4.6
03X-06A2-4
R1
ACS-CHK-C3
100
03X-08A0-4
R1
CHK-02
12.8
6.8
7.6
4.6
03X-08A0-4
R1
NOCH-0016-6x
100
03X-09A7-4
R1
CHK-03
15
8.6
13
2.7
03X-09A7-4
R1
NOCH-0016-6x
100
03X-13A8-4
R3
CHK-03
20.7
12.3
13
2.7
03X-13A8-4
R3
NOCH-0016-6x
100
03X-17A2-4
R3
CHK-04
24.3
12.6
22
1.5
03X-17A2-4
R3
NOCH-0016-6x
100
03X-25A4-4
R3
CHK-04
34
19.5
22
1.5
03X-25A4-4
R3
NOCH-0030-6x
100
03X-34A1-4
R4
CHK-05
57
27.2
33
1.1
03X-34A1-4
R4
NOCH-0030-6x
100
03X-41A8-4
R4
CHK-06
67
35.2
47
0.7
03X-41A8-4
R4
NOCH-0030-6x
100
03X-48A4-4
R4
CHK-06
74
42
47
0.7
03X-48A4-4
R4
NOCH-0070-6x
100
Values at 50 Hz/230 V and at 50 Hz/400 V power supplies
I 1N = Nominal input current
I TH = Nominal choke thermal current
L = Choke inductance
Catalog | ABB general purpose drives ACS310 21
Options
External
A separate order line and type designation is required for
any of these external options.
EMC filters
The ACS310’s internal EMC filter is designed to meet category
C3 requirements of EN/IEC 61800-3 standard. External
EMC filters are used to enhance the drives electromagnetic
performance in conjunction with its internal filtering. Maximum
motor cable length depends on required electromagnetic
performance, according to the table below.
Low leakage current filters
Low leakage current filters are ideal for installations where
residual current devices (RCD) are required and leakage
current needs to be below 30 mA.
Type
Frame
Filter
Cable length 1)
Cable length1)
Type
Frame
designation
size
type
with external EMC
without external
designation
size
filter
EMC filter
ACS310-
ACS310C1
C2
C3
C3
C4
[m]
[m]
[m]
[m]
[m]
R0
RFI-11
10
30
-
30
30
01X-04A7-2
R1
RFI-12
10
30
50
30
50
01X-06A7-2
R1
RFI-12
10
30
50
30
50
01X-07A5-2
R2
RFI-13
10
30
50
30
50
01X-09A8-2
R2
RFI-13
10
30
50
30
50
R0
RFI-32
10
30
-
30
30
03X-03A9-2
R0
RFI-32
10
30
-
30
30
03X-05A2-2
R1
RFI-32
10
30
50
30
50
03X-07A4-2
R1
RFI-32
10
30
50
30
50
with LRFI filter
C2
Low leakage current filters, 3-phase AC supply, 400 V
3-phase AC supply, 200 to 240 V
03X-02A6-2
Cable length 1)
[m]
1-phase AC supply, 200 to 240 V
01X-02A4-2
Filter type
03X-01A3-4
R0
LRFI-31
10
03X-02A1-4
R0
LRFI-31
10
03X-02A6-4
R1
LRFI-31
10
03X-03A6-4
R1
LRFI-31
10
03X-04A5-4
R1
LRFI-31
10
03X-06A2-4
R1
LRFI-31
10
03X-08A0-4
R1
LRFI-32
10
03X-09A7-4
R1
LRFI-32
10
1)
Internal EMC filter must be disconnected by removing the EMC screw from
the drive.
03X-08A3-2
R1
RFI-32
10
30
50
30
50
03X-10A8-2
R2
RFI-32
10
30
50
30
50
03X-14A6-2
R2
RFI-33
10
30
50
30
50
EN 61800-3
EN 55011, product
EN 61800-3/A11 (2000),
03X-19A4-2
R2
RFI-33
10
30
50
30
50
(2004),
family standard for
product standard
03X-26A8-2
R3
RFI-34
10
30
50
30
50
product
industrial, scientific
standard
and medical (ISM)
03X-34A1-2
R4
RFI-34
10
30
50
30
50
03X-50A8-2
R4
RFI-34
10
30
50
30
50
3-phase AC supply, 380 to 480 V
03X-01A3-4
R0
RFI-32
30
30
-
30
30
03X-02A1-4
R0
RFI-32
30
30
-
30
30
03X-02A6-4
R1
RFI-32
50
50
50
30
50
03X-03A6-4
R1
RFI-32
50
50
50
30
50
03X-04A5-4
R1
RFI-32
50
50
50
30
50
03X-06A2-4
R1
RFI-32
50
50
50
30
50
03X-08A0-4
R1
RFI-32
50
50
50
30
50
03X-09A7-4
R1
RFI-32
50
50
50
30
50
03X-13A8-4
R3
RFI-33
40
40
40
30
50
03X-17A2-4
R3
RFI-33
40
40
40
30
50
03X-25A4-4
R3
RFI-33
40
40
40
30
50
03X-34A1-4
R4
RFI-34
-
30
-
30
50
03X-41A8-4
R4
RFI-34
-
30
-
30
50
03X-48A4-4
R4
RFI-34
-
30
-
30
50
1)
Internal EMC filter must be connected with the EMC screw in the drive.
When the filter is not connected the C4 maximum cable lengths are allowed
to be used.
22 ABB general purpose drives ACS310 | Catalog
EMC standards in general
equipment
Category C1
Category C2
Category C3
Category C4
Group 1
1st environment,
Class B
unrestricted distribution
Group 1
1 st environment, restricted
Class A
distribution
Group 2
2 nd environment,
Class A
unrestricted distribution
Not applicable
2 nd environment, restricted
distribution
Compact AC500-eCo PLC with ACS310
ABB’s Programmable Logic Controller AC500-eCo can be
used for controlling and monitoring the system, for
applications that require complex control logic and when
several drives are connected together through Modbus
link.
Easy commissioning and fast startup
Additionally SREA-01 Ethernet adapter offers Modbus TCP
to Modbus RTU gateway functionality which enables Modbus
TCP connectivity to ACS310. Please refer to SREA-01 user’s
guide for more detailed information.
Compact design saves installation space
− − The compact size of the PLC and drive provides
flexibility when integrating into existing or new system
designs.
− − AC500-eCo is an economical, entry level PLC for
stand-alone solutions and equipment control. It saves
space due to onboard digital and analog I/O. AC500-eCo is
easy to program and provides six programming languages.
Flexible system expansion
When the system requirements expand, ABB’s wide product
range provides a flexible and cost-efficient way to meet the
system’s growing needs.
AC500-eCo belongs to the AC500 PLC platform. AC500 is
a scalable and modular platform which can be combined
and flexibly expanded to suit either decentralized or
centralized configurations.
Automation Builder, the programming tool for AC500, is
based on IEC 61131-3 standard. Automation Builder is
used for the entire AC500 PLC platform. Automation
Builder easily allows to change the CPU in an existing
configuration to fit the CPU type to the performance
need of the application.
Ready-made communication and control blocks for
AC500-eCo and AC500 PLC range are available,
supporting a wide range of ABB’s low voltage AC drives.
Benefits
−− Control of a motor in minutes
− − Cost-efficient system expansion, since the same
application program can be used for the entire AC500
PLC platform
−− Fast commissioning with ready-made Modbus macro.
Catalog | ABB general purpose drives ACS310 23
ABB product offering
ABB micro drives
ABB micro drives are designed to be incorporated into a wide variety of machines
such as mixers, conveyors, fans or pumps or anywhere where a fixed speed
motor needs connect with a variablespeed motor. The ABB micro drives meet the
requirements of OEMs, machinery builders and panel builders. These drives are
widely available through the ABB distribution network. The drives are easy to select
and provide a range of built-in features as standard.
For more information, please visit www.abb.com/drives
ABB general purpose drives
ABB general purpose drives are ideal in situations where there is a need for a drive
that is easy to install, commission and use. They are designed to offer control over
a broad range of standard drive applications and have a wide range of built-in
features simplifying all operations. For more information, please visit
www.abb.com/drives
ABB’s Programmable Logic Controllers PLCs
The AC500, AC500-eCo, AC500-S and AC500-XC scalable PLC ranges provide
solutions for small, middle and high-end applications. Our AC500 PLC platform
offers different performance levels and is the ideal choice for high availability,
extreme environments or safety solutions. Our AC500 PLC platform offers interoperability and compatibility in hardware and software from compact PLCs up to high
end and safety PLCs. For more information, please visit www.abb.com/plc.
Control panels
The CP600-eCo and CP600 HMI control panels offer a wide range of features and
functionalities for maximum operability. ABB control panels are distinguished by
their robustness and easy usability, providing all the relevant information from production plants and machines at a single touch. For more information, please visit
www.abb.com/plc.
Automation Builder engineering suite
Automation Builder integrates engineering and maintenance for PLC, Drives,
Motion, HMI and Robotics. Automation Builder is an integrated software suite for
machine builders and system integrators wanting to automate their machines and
systems in a productive way. Automation Builder combines the proven ABB tools
RobotStudio, Drive manager, Drive Composer pro, Mint WorkBench, Panel Builder
and succeeds Control Builder Plus. Build solutions with Drive application programming (IEC 61131-3), Drive management, configuration and diagnosis with common
process data editor, and Drive engineeringin Drive Composer pro. Download Automation Builder from www.abb.com/automationbuilder.
AC motors
ABB’s low voltage AC motors are designed to save energy, reduce operating costs
and enable demanding motor applications to perform reliably and without unscheduled downtime. General performance motors combine convenience and easy
handling seamlessly with ABB’s engineering expertise. Process performance motors
provide the most comprehensive, versatile set of motors for the process industries
and heavy-duty applications. For more information, please visit
http://new.abb.com/motors-generators
24 ABB general purpose drives ACS310 | Catalog
Catalog | ABB general purpose drives ACS310 25
Drives service
Your choice, your future
The future of your drives depends on the service
you choose.
Whatever you choose, it should be a well-informed decision.
No guesswork. We have the expertise and experience to
help you find and implement the right service for your drive
equipment. You can start by asking yourself these two critical
questions:
Your choice, your business efficiency
ABB Drive Care agreement lets you focus on your core
business. A selection of predefined service options matching
your needs provides optimal, more reliable performance,
extended drive lifetime and improved cost control. So you can
reduce the risk of unplanned downtime and find it easier to
budget for maintenance.
−− Why should my drive be serviced?
− − What would my optimal service options be?
We can help you more by knowing where you are!
Register your drive at www.abb.com/drivereg for extended
warranty options and other benefits.
From here, you have our guidance and full support along the
course you take, throughout the entire lifetime of your drives.
Service to match your needs
Your service needs depend on your operation, life cycle of your equipment and business priorities. We have identified
our customers’ four most common needs and defined service options to satisfy them. What is your choice to keep your
drives at peak performance?
Is uptime
your priority?
Keep your drives running with
precisely planned and executed
maintenance.
Example services include:
Life Cycle Assessment
Installation and
Commissioning
Spare Parts
Preventive Maintenance
Reconditioning
ABB Drive Care agreement
Drive Exchange
Is rapid response a
key consideration?
Need to extend your
assets’ lifetime?
If your drives require immediate
action, our global network is at
your service.
Maximize your drive’s lifetime
with our services.
Example services include:
Technical Support
On-site Repair
Remote Support
Response time agreements
Training
Example services include:
Life Cycle Assessment
Upgrades, Retrofits and
Modernization
Replacement, Disposal and
Recycling
Is performance
most critical to
your operation?
Get optimal performance out of
your machinery and systems.
Example services include:
Advanced services
Engineering and Consulting
Inspection and Diagnostics
Upgrades, Retrofits and
Modernization
Workshop Repair
Tailored services
24
Rapid
response
Operational
efficiency
26 ABB general purpose drives ACS310 | Catalog
Life cycle
management
Performance
improvement
Drives service
A lifetime of peak performance
You’re in control of every life cycle phase of your drives.
At the heart of drive services is a four-phase product life
cycle management model. This model defines the services
recommended and available throughout drives lifespan.
Now it’s easy for you to see the exact service and
maintenance available for your drives.
ABB drives life cycle phases explained:
Active
Classic
Full range of life cycle services and support
Limited
Obsolete
Limited range of life cycle
services and support
Replacement and
end-of-life services
Product is in
active sales and
manufacturing
phase.
Serial production has
ceased. Product may
be available for plant
extensions, as a spare
part or for installed
base renewal.
Product is no longer
available.
Product is no longer
available.
Full range of life cycle
services is available.
Full range of life cycle
services is available.
Limited range of life cycle
services is available.
Replacement and
end-of-life services
are available.
Product enhancements
may be available through
upgrade and retrofit
solutions.
Spare parts availability
is limited to available
stock.
Keeping you informed
We notify you every step of the way using life cycle status
statements and announcements.
Your benefit is clear information about your drives’ status
and precise services available. It helps you plan the preferred
service actions ahead of time and make sure that continuous
support is always available.
Step 1
Life Cycle Status Announcement
Provides early information about the upcoming
life cycle phase change and how it affects the
availability of services.
Step 2
Life Cycle Status Statement
Provides information about the drive's current life
cycle status, availability of product and services,
life cycle plan and recommended actions.
Catalog | ABB general purpose drives ACS310 27
For more information please contact your local ABB
representative or visit:
© Copyright 2016 ABB. All rights reserved.
Specifications subject to change without notice.
www.abb.com/drives
www.abb.com/drivespartners
www.abb.com/plc
www.abb.com/automationbuilder
ACS310 how-to video:
3AUA0000051082 REV G EN 16.5.2016 *13139
Contact us