AF38-40-00-13

AF38-40-00-13 General Information Extended Product Type: Product ID: EAN: Catalog Description: Long Description: AF38-40-00-13 1SBL297201R1300 3471523115330 AF38-40-00-13 100-250V50/60HZ-DC Contactor AF38 4-pole contactors are used for controlling power circuits up to 690 V AC and 440 V DC. They are mainly used for controlling non-inductive or slightly inductive loads (i.e. resistance furnaces...). AF... contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF contactors have built-in surge protection and do not require additional surge suppressors. The AF... series 4-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 4 N.O. main poles, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available. Categories Products » Low Voltage Products and Systems » Control Products » Contactors » Block Contactors Ordering Minimum Order Quantity: Customs Tariff Number: EAN: 1 piece 85369085 3471523115330 Dimensions Product Net Depth: Product Net Height: Product Net Weight: Product Net Width: 101 mm 86 mm 0.360 kg 45 mm Container Information Package Level 1 Width: Package Level 1 Length: Package Level 1 Height: Package Level 1 Gross Weight: Package Level 1 EAN: Package Level 2 Units: Package Level 2 Width: Package Level 2 Length: Package Level 2 Height: Package Level 3 Units: Package Level 1 Units: 87 mm 103 mm 47 mm 0.36 kg 3471523115330 36 piece 250 mm 300 mm 315 mm 864 piece 1 piece Technical Number of Main Contacts NC: Number of Auxiliary Contacts NO: Number of Auxiliary Contacts NC: Standards: Rated Operational Voltage: Rated Frequency (f): Conventional Free-air Thermal Current (Ith): Rated Operational Current AC-1 (Ie): 0 0 0 IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1, UL 508, CSA C22.2 N°14 Main Circuit 690 V Main Circuit 50 / 60 Hz acc. to IEC 60947-4-1, Open Contactors q = 40 °C 55 A (690 V) 40 °C 55 A (690 V) 60 °C 45 A (690 V) 70 °C 37 A Rated Operational Current AC-3 (Ie): (220 / 230 / 240 V) 60 °C 23.2 A (380 / 400 V) 60 °C 22 A (415 V) 60 °C 21.2 A (440 V) 60 °C 20 A (500 V) 60 °C 17.6 A (690 V) 60 °C 10.5 A Rated Operational Power AC-3 (Pe): (220 / 230 / 240 V) 5.5 kW (400 V) 11 kW (415 V) 11 kW (440 V) 11 kW (500 V) 11 kW (690 V) 9 kW Rated Short-time Withstand Current at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 300 A (Icw): at 40 °C Ambient Temp, in Free Air, from a Cold State 15 min 55 A at 40 °C Ambient Temp, in Free Air, from a Cold State 1 min 150 A at 40 °C Ambient Temp, in Free Air, from a Cold State 1 s 450 A at 40 °C Ambient Temp, in Free Air, from a Cold State 30 s 225 A Maximum Electrical Switching AC-1 600 cycles per hour Frequency: Rated Insulation Voltage (Ui): acc. to UL/CSA 600 V acc. to IEC 60947-4-1 and VDE 0110 (Gr. C) 690 V Rated Impulse Withstand Voltage 6 kV (Uimp): Maximum Mechanical Switching 3600 cycles per hour Frequency: Rated Control Circuit Voltage (Uc): 50 Hz 100 ... 250 V 60 Hz 100 ... 250 V DC Operation 100 ... 250 V Operate Time: Between Coil De-energization and NC Contact Closing 13...98 ms Between Coil De-energization and NO Contact Opening 11...95 ms Between Coil Energization and NC Contact Opening 38...90 ms Between Coil Energization and NO Contact Closing 40...95 ms Connecting Capacity Main Circuit: Flexible with Insulated Ferrule 1x 1.5...16 mm² Flexible with Insulated Ferrule 2x 1.5...16 mm² Flexible with Ferrule 1/2x 1.5...16 mm² Rigid 1/2x 1.5...16 mm² Connecting Capacity Control Circuit: Flexible with Ferrule 1/2x 0.75 ... 2.5 mm² Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm² Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm² Rigid 1/2x 1 ... 2.5 mm² Wire Stripping Length: Control Circuit 10 mm Main Circuit 12 mm Degree of Protection: acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20 acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP20 Terminal Type: Screw Terminals Number of Main Contacts NO: 4 Environmental Climatic Withstand: Maximum Operating Altitude Permissible: Resistance to Vibrations acc. to IEC 60068-2-6: Resistance to Shock acc. to IEC 60068-2-27: RoHS Status: Ambient Air Temperature: Category B according to IEC 60947-1 Annex Q 3000 m 5 ... 300 Hz 4 g closed position / 2 g open position Closed, Shock Direction: B1 25 g Open, Shock Direction: B1 5 g Shock Direction: A 30 g Shock Direction: B2 15 g Shock Direction: C1 25 g Shock Direction: C2 25 g Planned to follow EU Directive 2002/95/EC August 18, 2005 and amendment after 2008 Q1 Close to Contactor for Storage -60...+80 °C Near Contactor for Operation in Free Air -40 ... +70 °C Technical UL/CSA General Use Rating UL/CSA: Tightening Torque UL/CSA: (600 V AC) 55 A Control Circuit 11 in·lb Main Circuit 22 in·lb Certificates and Declarations (Document Number) Instructions and Manuals: ABS Certificate: CB Certificate: CCC Certificate: Data Sheet, Technical Information: Declaration of Conformity - CE: DNV Certificate: EAC Certificate: GL Certificate: GOST Certificate: 1SBC101027M6801 ABS_15-GE1349500-PDA_90682247 CB_SE_70858M1 CCC_2010010304445623 1SBC101424D0201 1SBD250001U1000 DNV-GL_E13871 EAC_RU C-FR ME77 B01010 DNV-GL_E13871 GOST_POCCFR.ME77.B07175.pdf LR Certificate: RINA Certificate: RMRS Certificate: RoHS Information: UL Certificate: UL Listing Card: LRS_1300087E1 RINA_ELE084013XG RMRS_1400682124 1SBD251015E1000 UL_20120918-E319322-3-1 UL_E319322 Classifications E-nummer: ETIM 4: ETIM 5: ETIM 6: UNSPSC: Object Classification Code: 3211520 EC000066 - Magnet contactor, AC-switching EC000066 - Magnet contactor, AC-switching EC000066 - Power contactor, AC switching 39121529 Q