APXS003A0X-SRZ

GE Data Sheet 12V PicoTLynxTM 3A: Non-Isolated DC-DC Power Module 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current Features  Compliant to RoHS EU Directive 2002/95/EC (Z versions)  Compatible in a Pb-free or SnPb reflow environment (Z versions)  DOSA based  Wide Input voltage range (4.5Vdc-14Vdc)  Output voltage programmable from 0.59Vdc to 5.5Vdc via external resistor RoHS Compliant  Tunable LoopTM to optimize dynamic output voltage response EZ-SEQUENCETM  Flexible output voltage sequencing EZ-SEQUENCE (APTS versions)  Remote sense Applications  Distributed power architectures  Power Good signal  Intermediate bus voltage applications  Fixed switching frequency  Telecommunications equipment  Output overcurrent protection (non-latching)  Servers and storage applications  Overtemperature protection  Networking equipment  Remote On/Off  Industrial equipment  Ability to sink and source current  Cost efficient open frame design  Small size: 12.2 mm x 12.2 mm x 6.25 mm Vin+ VIN PGOOD Vout+ VOUT SENSE MODULE SEQ Cin CTUNE Q1 ON/OFF GND (0.48 in x 0.48 in x 0.246 in) RTUNE  Wide operating temperature range [-40°C to 105°C(Ruggedized: -D), 85°C(Regular)]  UL* 60950-1Recognized, CSA† C22.2 No. 60950-1-03 Certified, and VDE‡ 0805:2001-12 (EN60950-1) Licensed  ISO** 9001 and ISO 14001 certified manufacturing facilities Co TRIM RTrim Description The 12V PicoTLynxTM 3A power modules are non-isolated dc-dc converters that can deliver up to 3A of output current. These modules operate over a wide range of input voltage (VIN = 4.5Vdc-14Vdc) and provide a precisely regulated output voltage from 0.59Vdc to 5.5Vdc, programmable via an external resistor. Features include remote On/Off, adjustable output voltage, over current and overtemperature protection, and output voltage sequencing (APTS versions). The Ruggedized version (-D) is capable of operation up to 105°C and withstand high levels of shock and vibration. A new feature, the Tunable LoopTM, allows the user to optimize the dynamic response of the converter to match the load with reduced amount of output capacitance leading to savings on cost and PWB area. * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards ‡ May 2, 2013 ©2013 General Electric Company. All rights reserved. GE Data Sheet 12V PicoTLynxTM 3A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit All VIN -0.3 15 Vdc APTS VSEQ -0.3 ViN Vdc All TA -40 85 °C -D version TA -40 105 °C All Tstg -55 125 °C Input Voltage Continuous Sequencing Voltage Operating Ambient Temperature (see Thermal Considerations section) Storage Temperature Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit Operating Input Voltage All VIN 4.5 ⎯ 14.0 Vdc Maximum Input Current All IIN,max 3.5 Adc (VIN=4.5V to 14V, IO=IO, max ) Input No Load Current VO,set = 0.6 Vdc IIN,No load 17 mA VO,set = 3.3Vdc IIN,No load 55 mA All IIN,stand-by 1 mA Inrush Transient All I2t Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1μH source impedance; VIN =0 to 14V, IO= IOmax ; See Test Configurations) All 43 mAp-p Input Ripple Rejection (120Hz) All 50 dB (VIN = 12.0Vdc, IO = 0, module enabled) Input Stand-by Current (VIN = 12.0Vdc, module disabled) 1 A2s CAUTION: This power module is not internally fused. An input line fuse must always be used. This power module can be used in a wide variety of applications, ranging from simple standalone operation to an integrated part of sophisticated power architecture. To preserve maximum flexibility, internal fusing is not included; however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a fast-acting fuse with a maximum rating of 5A (see Safety Considerations section). Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s data sheet for further information. May 2, 2013 ©2013 General Electric Company. All rights reserved. Page 2 GE Data Sheet 12V PicoTLynxTM 3A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current Electrical Specifications (continued) Parameter Output Voltage Set-point (with 0.5% tolerance for external resistor used to set output voltage) Output Voltage (Over all operating input voltage, resistive load, and temperature conditions until end of life) Adjustment Range (selected by an external resistor) (Some output voltages may not be possible depending on the input voltage – see Feature Descriptions Section) Remote Sense Range Output Regulation (for VO ≥ 2.5Vdc) Line (VIN=VIN, min to VIN, max) Load (IO=IO, min to IO, max) Temperature (Tref=TA, min to TA, max) Device Symbol Min All VO, set -1.5 All VO, set -3.0 All VO 0.59 Typ ⎯ All Max Unit +1.5 % VO, set +3.0 % VO, set 5.5 Vdc 0.5 Vdc All All All ⎯ ⎯ ⎯ +0.4 10 +0.4 % VO, set mV % VO, set All All All ⎯ ⎯ ⎯ 10 5 5 mV mV mV 0.5 V 135 mVpk-pk Output Regulation (for VO < 2.5Vdc) Line (VIN=VIN, min to VIN, max) Load (IO=IO, min to IO, max) Temperature (Tref=TA, min to TA, max) Remote Sense Range All Output Ripple and Noise on nominal output (VIN=VIN, nom and IO=IO, min to IO, max Co = 0.1μF // 10 μF ceramic capacitors) VO > 3.3V Peak-to-Peak (5Hz to 20MHz bandwidth) All RMS (5Hz to 20MHz bandwidth) All VO ≤ 3.3V Peak-to-Peak (5Hz to 20MHz bandwidth) All RMS (5Hz to 20MHz bandwidth) All ⎯ ⎯ 110 35 45 mVrms 50 110 mVpk-pk 20 40 mVrms External Capacitance1 Without the Tunable LoopTM ESR ≥ 1 mΩ With the Tunable LoopTM ESR ≥ 0.15 mΩ ESR ≥ 10 mΩ All CO, max 0 ⎯ 47 μF All All CO, max CO, max 0 0 ⎯ ⎯ 1000 3000 μF μF Output Current All Io 0 Output Current Limit Inception (Hiccup Mode ) All IO, lim All VO,set = 0.59Vdc Output Short-Circuit Current (VO≤250mV) ( Hiccup Mode ) Efficiency 3 Adc 200 % Io,max IO, s/c 300 mA η 73.3 % % VIN= 12Vdc, TA=25°C VO, set = 1.2Vdc η 82.9 IO=IO, max , VO= VO,set VO,set = 1.8Vdc η 86.5 % VO,set = 2.5Vdc η 88.9 % VO,set = 3.3Vdc η 90.6 % VO,set = 5.0Vdc η 92.6 % All fsw Peak Deviation All Vpk 220 mV Settling Time (Vo