APXS006A0X4-SRZ

GE Data Sheet 12V PicoTLynxTM 6A: Non-Isolated DC-DC Power Module 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 6A Output Current Features ▪ ▪ RoHS Compliant EZ-SEQUENCETM Applications Compliant to RoHS Directive 2011/65/EU and amended Directive (EU) 2015/863 Compliant to REACH Directive (EC) No 1907/2006 ▪ Compatible in a Pb-free or SnPb reflow environment (Z versions) ▪ DOSA based ▪ Wide Input voltage range (4.5Vdc-14Vdc) ▪ Output voltage programmable from 0.59Vdc to 5.5Vdc via external resistor ▪ Tunable LoopTM to optimize dynamic output voltage response ▪ Flexible output voltage sequencing EZ-SEQUENCE (APTS versions) ▪ Distributed power architectures ▪ Intermediate bus voltage applications ▪ Remote sense ▪ Telecommunications equipment ▪ Power Good signal ▪ Servers and storage applications ▪ Fixed switching frequency ▪ Networking equipment ▪ Output overcurrent protection (non-latching) ▪ Industrial equipment ▪ Overtemperature protection ▪ Remote On/Off ▪ Ability to sink and source current ▪ Cost efficient open frame design ▪ Small size: 12.2 mm x 12.2 mm x 7.25 mm Vin+ VIN PGOOD VOUT SENSE RTUNE MODULE Cin Vout+ SEQ CTUNE ON/OFF TRIM GND RTrim (0.48 in x 0.48 in x 0.29 in) Co ▪ Wide operating temperature range [-40°C to 85°C] ▪ ANSI/UL* 62368-1 and CAN/CSA† C22.2 No. 62368-1 Recognized, DIN VDE‡ 0868-1/A11:2017 (EN623681:2014/A11:2017 ▪ ISO** 9001 and ISO 14001 certified manufacturing facilities Description The 12V Pico TLynxTM 6A power modules are non-isolated dc-dc converters that can deliver up to 6A of output current. These modules operate over a wide range of input voltage (VIN = 4.5Vdc-14Vdc) and provide a precisely regulated output voltage from 0.59Vdc to 5.5Vdc, programmable via an external resistor. Features include remote On/Off, adjustable output voltage, over current and over temperature protection, and output voltage sequencing (APTS versions). A new feature, the Tunable LoopTM, allows the user to optimize the dynamic response of the converter to match the load with reduced amount of output capacitance leading to savings on cost and PWB area. * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards ‡ February 17, 2021 ©2017 General Electric Company. All rights reserved. GE Data Sheet 12V PicoTLynxTM 6A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 6A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Input Voltage Device Symbol Min Max Unit All VIN -0.3 15 Vdc APTS VSEQ -0.3 ViN Vdc All TA -40 85 °C All Tstg -55 125 °C Continuous Sequencing Voltage Operating Ambient Temperature (see Thermal Considerations section) Storage Temperature Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit 4.5 ⎯ 14.0 Vdc 6.5 Adc Operating Input Voltage All VIN Maximum Input Current All IIN,max VO,set = 0.6 Vdc IIN,No load 16 mA VO,set = 3.3Vdc IIN,No load 55 mA Input Stand-by Current (VIN = 12.0Vdc, module disabled) All IIN,stand-by 1.2 mA Inrush Transient All I2t Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1μH source impedance; VIN =0 to 14V, IO= IOmax ; See Test Configurations) All 86 mAp-p Input Ripple Rejection (120Hz) All 50 dB (VIN=4.5V to 14V, IO=IO, max ) Input No Load Current (VIN = 12.0Vdc, IO = 0, module enabled) A2s 1 CAUTION: This power module is not internally fused. An input line fuse must always be used. This power module can be used in a wide variety of applications, ranging from simple standalone operation to an integrated part of sophisticated power architecture. To preserve maximum flexibility, internal fusing is not included; however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a fast-acting fuse with a maximum rating of 6A (see Safety Considerations section). Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s data sheet for further information. February 17, 2021 ©2017 General Electric Company. All rights reserved. Page 2 GE Data Sheet 12V PicoTLynxTM 6A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 6A Output Current Electrical Specifications (continued) Parameter Device Symbol Min Output Voltage Set-point (with 0.5% tolerance for external resistor used to set output voltage) All VO, set -1.5 Output Voltage (Over all operating input voltage, resistive load, and temperature conditions until end of life) All VO, set -2.5 Adjustment Range (selected by an external resistor) (Some output voltages may not be possible depending on the input voltage – see Feature Descriptions Section) All VO 0.59 Remote Sense Range All Typ ⎯ Max Unit +1.5 % VO, set +2.5 % VO, set 5.5 Vdc 0.5 Vdc Output Regulation (for VO ≥ 2.5Vdc) Line (VIN=VIN, min to VIN, max) All ⎯ +0.4 % VO, set Load (IO=IO, min to IO, max) All ⎯ 10mV % VO, set Temperature (Tref=TA, min to TA, max) All ⎯ +0.4 % VO, set Line (VIN=VIN, min to VIN, max) All ⎯ 10 mV Load (IO=IO, min to IO, max) All ⎯ 5 mV Temperature (Tref=TA, min to TA, max) All ⎯ 5 mV 50 100 mVpk-pk 20 38 mVrms Output Regulation (for VO < 2.5Vdc) Output Ripple and Noise on nominal output (VIN=VIN, nom and IO=IO, min to IO, max Co = 0.1μF // 10 μF ceramic capacitors) Peak-to-Peak (5Hz to 20MHz bandwidth) All RMS (5Hz to 20MHz bandwidth) All ⎯ External Capacitance1 Without the Tunable LoopTM All CO, max 0 ⎯ 47 μF ESR ≥0.15 mΩ All CO, max 0 ⎯ 1000 μF ESR ≥ 10 mΩ All CO, max 0 ⎯ 3000 μF Output Current (in either sink or source mode) All Io 0 6 Adc Output Current Limit Inception (Hiccup Mode) (current limit does not operate in sink mode) All IO, lim 200 % Io,max Output Short-Circuit Current All IO, s/c 170 mA VO,set = 0.6Vdc η 69.3 % % ESR ≥ 1 mΩ With the Tunable LoopTM (VO≤250mV) ( Hiccup Mode ) Efficiency VIN= 12Vdc, TA=25°C VO, set = 1.2Vdc η 80.7 IO=IO, max , VO= VO,set VO,set = 1.8Vdc η 85.3 % VO,set = 2.5Vdc η 88.1 % VO,set = 3.3Vdc η 90.8 % VO,set = 5.0Vdc η 93.6 % All fsw Switching Frequency ⎯ 600 ⎯ kHz External capacitors may require using the new Tunable LoopTM feature to ensure that the module is stable as well as getting the best transient response. See the Tunable LoopTM section for details. February 17, 2021 ©2017 General Electric Company. All rights reserved. Page 3 GE Data Sheet 12V PicoTLynxTM 6A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 6A Output Current General Specifications Parameter Device Calculated MTBF (IO=0.8IO, max, TA=40°C) Telecordia Issue 2 Method 1 Case 3 Min Typ APTS Max Unit 14,353,850 APXS Hours 22,280,045 ⎯ Weight Hours ⎯ 1.95 (0.0687) g (oz.) Feature Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. See Feature Descriptions for additional information. Parameter Device Symbol Min Typ Max Unit On/Off Signal Interface (VIN=VIN, min to VIN, max ; open collector or equivalent, Signal referenced to GND) Device is with suffix “4” – Positive Logic (See Ordering Information) Logic High (Module ON) Input High Current All IIH Input High Voltage All VIH ⎯ 10 µA 3.5 ⎯ VIN,max V Logic Low (Module OFF) Input Low Current All IIL ⎯ ⎯ 1 mA Input Low Voltage All VIL -0.3 ⎯ 0.8 V Device Code with no suffix – Negative Logic (See Ordering Information) (On/OFF pin is open collector/drain logic input with external pull-up resistor; signal referenced to GND) Logic High (Module OFF) Input High Current All IIH ― ― 1 mA Input High Voltage All VIH 3.5 ― VIN, max Vdc Input low Current All IIL ― ― 10 μA Input Low Voltage All VIL -0.2 ― 0.6 Vdc All Tdelay ― 2 ― msec All Tdelay ― 2 ― msec All Trise ― 4 Logic Low (Module ON) Turn-On Delay and Rise Times (VIN=VIN, nom, IO=IO, max , VO to within ±1% of steady state) Case 1: On/Off input is enabled and then input power is applied (delay from instant at which VIN = VIN, min until Vo = 10% of Vo, set) Case 2: Input power is applied for at least one second and then the On/Off input is enabled (delay from instant at which Von/Off is enabled until Vo = 10% of Vo, set) Output voltage Rise time (time for Vo to rise from 10% of Vo, set to 90% of Vo, set) Output voltage overshoot (TA = 25oC VIN= VIN, min to VIN, max,IO = IO, min to IO, max) ― msec 3.0 % VO, set With or without maximum external capacitance Over Temperature Protection All Tref 140 °C (Power-Up: 2V/ms) APTS VSEQ –Vo 100 mV (Power-Down: 2V/ms) APTS VSEQ –Vo 100 mV (See Thermal Considerations section) Tracking Accuracy (VIN, min to VIN, max; IO, min to IO, max VSEQ < Vo) February 17, 2021 ©2017 General Electric Company. All rights reserved. Page 4 GE Data Sheet 12V PicoTLynxTM 6A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 6A Output Current Feature Specifications (cont.) Parameter Device Symbol Min Typ Max Units 4.3 Vdc Input Undervoltage Lockout Turn-on Threshold All Turn-off Threshold All 3.4 Vdc Hysteresis All 0.4 Vdc Output Voltage Limit for PGOOD All 90% Pulldown resistance of PGOOD pin All PGOOD (Power Good) Signal Interface Open Drain, Vsupply  5VDC February 17, 2021 ©2017 General Electric Company. All rights reserved. 7 110% VO, set 50  Page 5 GE Data Sheet 12V PicoTLynxTM 6A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 6A Output Current Characteristic Curves The following figures provide typical characteristics for the 12V Pico TLynxTM 6A at 0.6Vo and at 25oC. 85 OUTPUT CURRENT, Io (A) EFFICIENCY,  (%) 80 75 Vin=4.5V 70 Vin=12V 65 Vin=14V 60 0 1 2 3 4 5 6 AMBIENT TEMPERATURE, TA OC OUTPUT CURRENT, IO (A) Figure 5. Typical Start-up Using On/Off Voltage (Io = Io,max). VO (V) (200mV/div) OUTPUT VOLTAGE INPUT VOLTAGE TIME, t (2 ms/div) IO (A) (2Adiv) OUTPUT CURRENT, Figure 4. Transient Response to Dynamic Load Change from 0% to 50% to 0% . OUTPUT VOLTAGE VO (V) (200mV/div) VON/OFF (V) (5V/div) ON/OFF VOLTAGE OUTPUT VOLTAGE Figure 3. Typical output ripple and noise (VIN = 12V, Io = Io,max). TIME, t (20s /div) VO (V) (200mV/div) TIME, t (1s/div) February 17, 2021 Figure 2. Derating Output Current versus Ambient Temperature and Airflow. VIN (V) (5V/div) VO (V) (10mV/div) OUTPUT VOLTAGE Figure 1. Converter Efficiency versus Output Current. TIME, t (2 ms/div) Figure 6. Typical Start-up Using Input Voltage (VIN = 12V, Io = Io,max). ©2017 General Electric Company. All rights reserved. Page 6 GE Data Sheet 12V PicoTLynxTM 6A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 6A Output Current Characteristic Curves The following figures provide typical characteristics for the 12V Pico TLynxTM 6A at 1.2Vo and at 25oC. 95 OUTPUT CURRENT, Io (A) EFFICIENCY,  (%) 90 85 80 Vin=4.5V Vin=12V 75 Vin=14V 70 0 1 2 3 4 5 6 AMBIENT TEMPERATURE, TA OC OUTPUT CURRENT, IO (A) VO (V) (200mV/div) OUTPUT VOLTAGE Figure 11. Typical Start-up Using On/Off Voltage (Io = Io,max). INPUT VOLTAGE TIME, t (2 ms/div) IO (A) (2Adiv) OUTPUT CURRENT, Figure 10. Transient Response to Dynamic Load Change from 0% to 50% to 0%. OUTPUT VOLTAGE VO (V) (500mV/div) VON/OFF (V) (5V/div) ON/OFF VOLTAGE OUTPUT VOLTAGE Figure 9. Typical output ripple and noise (VIN = 12V, Io = Io,max). TIME, t (20s /div) VO (V) (500mV/div) TIME, t (1s/div) February 17, 2021 Figure 8. Derating Output Current versus Ambient Temperature and Airflow. VIN (V) (5V/div) VO (V) (10mV/div) OUTPUT VOLTAGE Figure 7. Converter Efficiency versus Output Current. TIME, t (2 ms/div) Figure 12. Typical Start-up Using Input Voltage (VIN = 12V, Io = Io,max). ©2017 General Electric Company. All rights reserved. Page 7 GE Data Sheet 12V PicoTLynxTM 6A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 6A Output Current Characteristic Curves The following figures provide typical characteristics for the 12V Pico TLynxTM 6A at 1.8Vo and at 25oC. 95 OUTPUT CURRENT, Io (A) EFFICIENCY,  (%) 90 85 Vin=4.5V Vin=12V 80 Vin=14V 75 70 0 1 2 3 4 5 6 AMBIENT TEMPERATURE, TA OC OUTPUT CURRENT, IO (A) Figure 17. Typical Start-up Using On/Off Voltage (Io = Io,max). VO (V) (200mV/div) OUTPUT VOLTAGE INPUT VOLTAGE TIME, t (2 ms/div) IO (A) (2Adiv) OUTPUT CURRENT, Figure 16. Transient Response to Dynamic Load Change from 0% to 50% to 0%. OUTPUT VOLTAGE VO (V) (500mV/div) VON/OFF (V) (10V/div) ON/OFF VOLTAGE OUTPUT VOLTAGE Figure 15. Typical output ripple and noise (VIN = 12V, Io = Io,max). TIME, t (20s /div) VO (V) (500mV/div) TIME, t (1s/div) February 17, 2021 Figure 14. Derating Output Current versus Ambient Temperature and Airflow. VIN (V) (5V/div) VO (V) (10mV/div) OUTPUT VOLTAGE Figure 13. Converter Efficiency versus Output Current. TIME, t (2 ms/div) Figure 18. Typical Start-up Using Input Voltage (VIN = 12V, Io = Io,max). ©2017 General Electric Company. All rights reserved. Page 8 GE Data Sheet 12V PicoTLynxTM 6A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 6A Output Current Characteristic Curves The following figures provide typical characteristics for the 12V Pico TLynxTM 6A at 2.5Vo and at 25oC. 100 OUTPUT CURRENT, Io (A) EFFICIENCY,  (%) 95 90 85 Vin=4.5V Vin=12V 80 Vin=14V 75 70 0 1 2 3 4 5 6 AMBIENT TEMPERATURE, TA OC OUTPUT CURRENT, IO (A) VO (V) (200mV/div) Figure 21. Typical output ripple and noise (VIN = 12V, Io = Io,max). Figure 22. Transient Response to Dynamic Load Change from 0% to 50% to 0%. OUTPUT VOLTAGE VO (V) (1V/div) OUTPUT VOLTAGE VO (V) (1V/div) VON/OFF (V) (5V/div) INPUT VOLTAGE VIN (V) (5V/div) TIME, t (20s /div) ON/OFF VOLTAGE TIME, t (1s/div) IO (A) (2Adiv) OUTPUT VOLTAGE Figure 20. Derating Output Current versus Ambient Temperature and Airflow. OUTPUT CURRENT, VO (V) (10mV/div) OUTPUT VOLTAGE Figure 19. Converter Efficiency versus Output Current. TIME, t (2 ms/div) Figure 23. Typical Start-up Using On/Off Voltage (Io = Io,max). February 17, 2021 TIME, t (2 ms/div) Figure 24. Typical Start-up Using Input Voltage (VIN = 12V, Io = Io,max). ©2017 General Electric Company. All rights reserved. Page 9 GE Data Sheet 12V PicoTLynxTM 6A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 6A Output Current Characteristic Curves The following figures provide typical characteristics for the 12V Pico TLynxTM 6A at 3.3Vo and at 25oC. 100 OUTPUT CURRENT, Io (A) EFFICIENCY,  (%) 95 90 Vin=4.5V 85 Vin=12V Vin=14V 80 75 70 0 1 2 3 4 5 6 AMBIENT TEMPERATURE, TA OC OUTPUT CURRENT, IO (A) VO (V) (200mV/div) OUTPUT VOLTAGE VO (V) (1V/div) VIN (V) (5V/div) VO (V) (1V/div) VON/OFF (V) (5V/div) ON/OFF VOLTAGE Figure 27. Typical output ripple and noise (VIN = 12V, Io = Io,max). INPUT VOLTAGE TIME, t (20s /div) Figure 28. Transient Response to Dynamic Load Change from 0% 50% to 0%. OUTPUT VOLTAGE TIME, t (1s/div) IO (A) (2Adiv) OUTPUT VOLTAGE Figure 26. Derating Output Current versus Ambient Temperature and Airflow. OUTPUT CURRENT, VO (V) (10mV/div) OUTPUT VOLTAGE Figure 25. Converter Efficiency versus Output Current. TIME, t (2ms/div) Figure 29. Typical Start-up Using On/Off Voltage (Io = Io,max). February 17, 2021 TIME, t (2ms/div) Figure 30. Typical Start-up Using Input Voltage (VIN = 12V, Io = Io,max). ©2017 General Electric Company. All rights reserved. Page 10 GE Data Sheet 12V PicoTLynxTM 6A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 6A Output Current Characteristic Curves The following figures provide typical characteristics for the 12V Pico TLynxTM 6A at 5Vo and at 25oC. 100 OUTPUT CURRENT, Io (A) EFFICIENCY,  (%) 95 90 Vin=8V 85 Vin=12V Vin=14V 80 75 70 0 1 2 3 4 5 6 AMBIENT TEMPERATURE, TA OC OUTPUT CURRENT, IO (A) VO (V) (200mV/div) IO (A) (2Adiv) OUTPUT VOLTAGE Figure 33. Typical Start-up Using On/Off Voltage (Io = Io,max). OUTPUT VOLTAGE VO (V) (2V/div) TIME, t (2 ms/div) Figure 35. Transient Response to Dynamic Load Change from 0% 50% to 0%. VIN (V) (5V/div) VO (V) (2V/div) VON/OFF (V) (5V/div) ON/OFF VOLTAGE OUTPUT VOLTAGE Figure 32. Typical output ripple and noise (VIN = 12V, Io = Io,max). TIME, t (20s /div) INPUT VOLTAGE TIME, t (1s/div) February 17, 2021 Figure 34. Derating Output Current versus Ambient Temperature and Airflow. OUTPUT CURRENT, VO (V) (20mV/div) OUTPUT VOLTAGE Figure 31. Converter Efficiency versus Output Current. TIME, t (1ms/div) Figure 36. Typical Start-up Using Input Voltage (VIN = 12V, Io = Io,max). ©2017 General Electric Company. All rights reserved. Page 11 GE Data Sheet 12V PicoTLynxTM 6A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 6A Output Current Test Configurations Design Considerations Input Filtering CURRENT PROBE The 12V Pico TLynxTM 6A module should be connected to a low ac-impedance source. A highly inductive source can affect the stability of the module. An input capacitance must be placed directly adjacent to the input pin of the module, to minimize input ripple voltage and ensure module stability. LTEST VIN(+) BATTERY 1μH CIN CS 1000μF Electrolytic 2x100μF Tantalum E.S.R.