ATH006A0XZ

GE Energy Data Sheet 6A Austin MicroLynx IITM: SIP Non-Isolated DC-DC Power Module 2.4Vdc –5.5Vdc input; 0.75Vdc to 3.63Vdc output; 6A Output Current RoHS Compliant Features ▪ Compliant to RoHS EU Directive 2011/65/EU and amended Directive (EU) 2015/863 ▪ Compliant to REACH Directive (EC) No 1907/2006 ▪ Flexible output voltage sequencing EZ-SEQUENCETM ▪ Delivers up to 6A output current ▪ High efficiency – 96% at 3.3V full load (VIN = 5.0V) ▪ Small size and low profile: 25.4 mm x 12.7mm x 6.68 mm EZ-SEQUENCE (1.00 in x 0. 5 in x 0.263 in) TM Applications ▪ Low output ripple and noise ▪ High Reliability: Calculated MTBF = 12.8M hours at 25oC Full-load ▪ Distributed power architectures ▪ Intermediate bus voltage applications ▪ Telecommunications equipment ▪ Servers and storage applications ▪ Networking equipment ▪ Enterprise Networks ▪ Latest generation IC’s (DSP, FPGA, ASIC) and Microprocessor powered applications ▪ Programmable Output voltage ▪ Line Regulation: 0.3% (typical) ▪ Load Regulation: 0.4% (typical) ▪ Temperature Regulation: 0.4 % (typical) ▪ Remote On/Off ▪ Output overcurrent protection (non-latching) ▪ Wide operating temperature range (-40°C to 85°C) ▪ ANSI/UL* 62368-1 and CAN/ CSA† C22.2 No. 62368-1 Recognized, DIN VDE‡ 0868-1/A11:2017 (EN623681:2014/A11:2017) ▪ ISO** 9001 and ISO 14001 certified manufacturing facilities Description Austin MicroLynxTM II SIP power modules are non-isolated dc-dc converters that can deliver up to 6A of output current with full load efficiency of 96.0% at 3.3V output. These modules provide a precisely regulated output voltage programmable via an external resistor from 0.75Vdc to 3.63Vdc over a wide range of input voltage (VIN = 2.4 – 5.5Vdc). Austin MicroLynxTM II has a sequencing feature, EZ-SEQUENCETM that enable designers to implement various types of output voltage sequencing when powering multiple modules on board. Their open-frame construction and small footprint enable designers to develop costand space-efficient solutions. In addition to sequencing, standard features include remote On/Off, programmable output voltage and over current protection. * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards ‡ February 16, 2021 ©2015 General Electric Company. All rights reserved. GE Energy Data Sheet 6A Austin MicroLynxIITM: SIP Non-Isolated DC-DC Power Modules 2.4Vdc – 5.5Vdc input; 0.75Vdc to 3.63Vdc output; 6A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit All VIN -0.3 5.8 Vdc Sequencing voltage All Vseq -0.3 VIN,max Vdc Operating Ambient Temperature All TA -40 85 °C All Tstg -55 125 °C Input Voltage Continuous (see Thermal Considerations section) Storage Temperature Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit Operating Input Voltage Vo,set ≤ 3.63 VIN 2.4 ⎯ 5.5 Vdc Maximum Input Current All IIN,max Adc (VIN= VIN, min to VIN, max, IO=IO, max ) Input No Load Current 6.0 VO,set = 0.75 Vdc IIN,No load 20 mA VO,set = 3.3Vdc IIN,No load 45 mA All IIN,stand-by 0.6 mA Inrush Transient All I2t Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1μH source impedance; VIN, min to VIN, max, IO= IOmax ; See Test configuration section) All 35 Input Ripple Rejection (120Hz) All 30 (VIN = VIN, nom, Io = 0, module enabled) Input Stand-by Current (VIN = VIN, nom, module disabled) A2s 0.04 mAp-p dB CAUTION: This power module is not internally fused. An input line fuse must always be used. This power module can be used in a wide variety of applications, ranging from simple standalone operation to being part of a complex power architecture. To preserve maximum flexibility, internal fusing is not included, however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a fast-acting fuse with a maximum rating of 6 A (see Safety Considerations section). Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s data sheet for further information. GE 2 GE Energy Data Sheet 6A Austin MicroLynxTMII: SIP Non-Isolated DC-DC Power Modules 2.4Vdc –5.5Vdc input; 0.75Vdc to 3.63Vdc output; 6A Output Current Electrical Specifications (continued) Parameter Output Voltage Set-point Device Symbol Min Typ Max Unit All VO, set -2.0 ⎯ +2.0 % VO, set All VO, set –3.0 ⎯ +3.0 % VO, set All VO 0.7525 3.63 Vdc (VIN=IN, min, IO=IO, max, TA=25°C) Output Voltage (Over all operating input voltage, resistive load, and temperature conditions until end of life) Adjustment Range Selected by an external resistor Output Regulation Line (VIN=VIN, min to VIN, max) All ⎯ 0.3 ⎯ % VO, set Load (IO=IO, min to IO, max) All ⎯ 0.4 ⎯ % VO, set Temperature (Tref=TA, min to TA, max) All ⎯ 0.4 ⎯ % VO, set RMS (5Hz to 20MHz bandwidth) All ⎯ 10 15 mVrms Peak-to-Peak (5Hz to 20MHz bandwidth) All ⎯ 40 50 mVpk-pk μF Output Ripple and Noise on nominal output (VIN=VIN, nom and IO=IO, min to IO, max Cout = 1μF ceramic//10μFtantalum capacitors) External Capacitance ESR ≥ 1 mΩ All CO, max ⎯ ⎯ 1000 ⎯ 3000 μF 6 Adc ESR ≥ 10 mΩ All CO, max ⎯ Output Current All Io 0 Output Current Limit Inception (Hiccup Mode ) All IO, lim ⎯ 220 ⎯ % Io All IO, s/c ⎯ 2 ⎯ Adc η 81.0 % VIN= VIN, nom, TA=25°C VO, set = 0.75Vdc VO, set = 1.2Vdc η 87.0 % IO=IO, max , VO= VO,set VO,set = 1.5Vdc η 89.0 % VO,set = 1.8Vdc η 90.0 % VO,set = 2.5Vdc η 93.0 % VO,set = 3.3Vdc η 96.0 % All fsw ⎯ 300 ⎯ kHz All Vpk ⎯ 130 ⎯ mV (VO= 90% of VO, set) Output Short-Circuit Current (VO≤250mV) ( Hiccup Mode ) Efficiency Switching Frequency Dynamic Load Response (dIo/dt=2.5A/s; VIN = VIN, nom; TA=25°C) Load Change from Io= 50% to 100% of Io,max; 1μF ceramic// 10 μF tantalum Peak Deviation Settling Time (Vo