ATS030A0X3-SRHZ

GE Data Sheet Austin MegaLynxTM: Non-Isolated DC-DC Power Modules 4.5Vdc – 5.5Vdc input; 0.8Vdc to 3.63Vdc output; 30A Output Current 6Vdc –14Vdc input; 0.8Vdc to 3.63Vdc output; 20/30A Output Current RoHS Compliant Features ▪ Compliant to RoHS EU Directive 2011/65/EU and amended Directive (EU) 2015/863 ▪ Compliant to REACH Directive (EC) No 1907/2006 ▪ Delivers up to 30A of output current ▪ High efficiency: 92% @ 3.3V full load (12Vin) ▪ Available in two input voltage ranges ATH: 4.5 to 5.5Vdc ATS: 6 to 14Vdc ▪ Output voltage programmable from ATH: 0.8 to 3.63Vdc ATS030: 0.8 to 2.75Vdc Applications ▪ Distributed power architectures ▪ Intermediate bus voltage applications ▪ Telecommunications equipment ▪ Servers and storage applications ▪ Networking equipment ATS020: 0.8 to 3.63Vdc ▪ Small size and low profile: 33.0 mm x 10.0 mm x 13.5 mm (1.30 in. x 0.39 in. x 0.53 in.) ▪ Monotonic start-up into pre-biased output ▪ Output voltage sequencing (EZ-SEQUENCETM) ▪ Remote On/Off ▪ Remote Sense ▪ Over current and Over temperature protection ▪ -P option: Paralleling with active current share ▪ -H option: Additional GND pins for improved thermal derating ▪ Wide operating temperature range (-40°C to 85°C) ▪ ANSI/UL* 62368-1 and CAN/CSA† C22.2 No. 62368-1 Recognized, DIN VDE‡ 0868-1/A11:2017 (EN623681:2014/A11:2017) ▪ ISO** 9001 and ISO 14001 certified manufacturing facilities Description The Austin MegaLynx series SMT power modules are non-isolated DC-DC converters in an industry standard package that can deliver up to 30A of output current with a full load efficiency of 92% at 2.5Vdc output voltage (V IN = 12Vdc). The ATH series of modules operate off an input voltage from 4.5 to 5.5Vdc and provide an output voltage that is programmable from 0.8 to 3.63Vdc, while the ATS series of modules have an input voltage range from 6 to 14V and provide a programmable output voltage ranging from 0.8 to 3.63Vdc. Both series have a sequencing feature that enables designers to implement various types of output voltage sequencing when powering multiple modules on the board. Additional features include remote On/Off, adjustable output voltage, remote sense, over current, over temperature protection and active current sharing between modules. * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards ‡ February 19, 2021 ©2016 General Electric Company. All rights reserved. GE Preliminary Data Sheet Austin MegaLynxTM: Non-Isolated DC-DC Power Modules 4.5Vdc – 5.5Vdc input; 0.8Vdc to 3.63Vdc output; 30A Output Current 6Vdc – 14Vdc input; 0.8Vdc to 3.63Vdc output; 20/30A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit ATH VIN ATS VIN -0.3 6 Vdc -0.3 15 Vdc ATH VsEQ ATS VsEQ -0.3 6 Vdc -0.3 15 Vdc All TA -40 85 °C All Tstg -55 125 °C Input Voltage Continuous Sequencing pin voltage Operating Ambient Temperature (see Thermal Considerations section) Storage Temperature Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Operating Input Voltage Maximum Input Current (VIN= VIN,min , VO= VO,set, IO=IO, max) Device Symbol Min Typ Max Unit ATH VIN 4.5 5.0 5.5 Vdc ATS VIN 6.0 12 14 Vdc ATH IIN,max 27 Adc ATS020 IIN,max 13.3 Adc ATS030 IIN,max 15.8 Adc Inrush Transient All I2 t 1 A2 s Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1μH source impedance; VIN=6.0V to 14.0V, IO= IOmax ; See Figure 1) All 100 mAp-p Input Ripple Rejection (120Hz) All 50 dB February 19, 2021 ©2016 General Electric Company. All rights reserved. Page 2 GE Preliminary Data Sheet Austin MegaLynxTM: Non-Isolated DC-DC Power Modules 4.5Vdc – 5.5Vdc input; 0.8Vdc to 3.63Vdc output; 30A Output Current 6Vdc – 14Vdc input; 0.8Vdc to 3.63Vdc output; 20/30A Output Current Electrical Specifications (continued) Parameter Output Voltage Set-point Device Symbol Min Typ Max Unit All VO, set -1.5 ⎯ +1.5 % VO, set All VO, set –5.0 ⎯ +3.0 % VO, set (VIN=VIN,nom, IO=IO, nom, Tref=25°C) Output Voltage (Over all operating input voltage, resistive load, and temperature conditions until end of life) Adjustment Range Selected by an external resistor ATS030 0.8 2.75 Vdc ATS020 0.8 3.63 Vdc ATH030* 0.8 3.63 Vdc Line (VIN=VIN, min to VIN, max) All ⎯ ⎯ 20 mV Load (IO=IO, min to IO, max) All ⎯ ⎯ 40 mV (-P version) ⎯ ⎯ 70 mV All ⎯ 0.5 1 % VO, set Peak-to-Peak (5Hz to 20MHz bandwidth) Vo ≤ 2.5V ⎯ 50 mVpk-pk Peak-to-Peak (5Hz to 20MHz bandwidth) 2.5V < Vo ≤ 3.63V ⎯ 75 mVpk-pk Peak-to-Peak (5Hz to 20MHz bandwidth) Vo > 3.63V ⎯ 100 mVpk-pk * VO ≥ 3.3V only possible for VIN ≥ 4.75V Output Regulation Temperature (Tref=TA, min to TA, max) Output Ripple and Noise on nominal output (VIN=VIN, nom and IO=IO, min to IO, max COUT = 0.1μF // 10 μF ceramic capacitors) External Capacitance 1 ESR ≥ 1 mΩ All CO, max 0 ⎯ 2,000 μF ESR ≥ 10 mΩ All CO, max 0 ⎯ 10,000 μF Output Current (VIN = 4.5 to 5.5Vdc) ATH Series Io 0 30 Adc (VIN = 6 to 14Vdc) ATS030 Series Io 0 30 Adc (VIN = 6 to 14Vdc) ATS020 Series Io 0 20 Adc Output Current Limit Inception (Hiccup Mode) All IO, lim ⎯ 140 ⎯ % Iomax Output Short-Circuit Current All IO, s/c ⎯ 3.5 ⎯ Adc VO,set = 0.8dc η 82.2 % VO,set = 1.2Vdc η 85.8 % VO,set = 1.5Vdc η 89.5 % VO,set = 1.8Vdc η 89.2 % VO,set = 2.5Vdc η 92.0 % VO,set = 3.3Vdc η 92.2 % (VO≤250mV) ( Hiccup Mode ) Efficiency ATH Series: VIN=5Vdc, TA=25°C IO=IO, max , VO= VO,set 1 Note that maximum external capacitance may be lower when sequencing is employed. Please check with your GE Technical representative. February 19, 2021 ©2016 General Electric Company. All rights reserved. Page 3 GE Preliminary Data Sheet Austin MegaLynxTM: Non-Isolated DC-DC Power Modules 4.5Vdc – 5.5Vdc input; 0.8Vdc to 3.63Vdc output; 30A Output Current 6Vdc – 14Vdc input; 0.8Vdc to 3.63Vdc output; 20/30A Output Current Electrical Specifications (continued) Parameter Device Symbol Min Typ Max Unit ATS Series: VIN=12Vdc, TA=25°C VO,set = 0.8dc η 77.5 % IO=IO, max , VO= VO,set VO,set = 1.2Vdc η 83.5 % VO,set = 1.8Vdc η 86.5 % VO,set = 2.5Vdc η 91.3 % VO,set = 3.3Vdc η 92.1 All fsw ⎯ 300 All Vpk ⎯ 350 All ts ⎯ 25 All Vpk ⎯ 350 All ts ⎯ 25 ⎯ s All Vpk ⎯ 250 ⎯ mV All ts ⎯ 40 ⎯ s All Vpk ⎯ 250 ⎯ mV All ts ⎯ 40 ⎯ s Switching Frequency, Fixed % ⎯ kHz Dynamic Load Response (dIO/dt=5A/s; VIN=12V, Vo=3.3V ; TA=25°C) Load Change from Io= 50% to 100% of IO,max; No external output capacitors Peak Deviation Settling Time (VO