AXA016A0X3Z

GE Data Sheet 12V Austin SuperLynxTM 16A: SIP Non-Isolated DC-DC Power Module 10Vdc –14Vdc input; 0.75Vdc to 5.5Vdc output; 16A Output Current Features RoHS Compliant  Compliant to RoHS EU Directive 2002/95/EC (-Z versions)  Compliant to ROHS EU Directive 2002/95/EC with lead solder exemption (non-Z versions)  Delivers up to 16A output current  High efficiency – 92% at 3.3V full load (VIN = 12.0V)  Small size and low profile: 50.8 mm x 12.7 mm x 8.10 mm (2.00 in x 0.50 in x 0.32 in) Applications  Low output ripple and noise  High Reliability: Calculated MTBF = 4.4M hours at 25oC Full-load  Distributed power architectures  Intermediate bus voltage applications  Constant switching frequency (300 kHz)  Telecommunications equipment   Servers and storage applications Output voltage programmable from 0.75 Vdc to 5.5Vdc via external resistor Networking equipment  Line Regulation: 0.3% (typical)  Enterprise Networks  Load Regulation: 0.4% (typical)  Latest generation IC’s (DSP, FPGA, ASIC) and Microprocessor powered applications  Temperature Regulation: 0.4 % (typical)   Remote On/Off  Remote Sense  Output overcurrent protection (non-latching)  Wide operating temperature range (-40°C to 85°C)  UL* 60950-1Recognized, CSA† C22.2 No. 60950-1-03 Certified, and VDE‡ 0805:2001-12 (EN60950-1) Licensed  ISO** 9001 and ISO 14001 certified manufacturing facilities Description Austin SuperLynxTM 12V SIP power modules are non-isolated dc-dc converters that can deliver up to 16A of output current with full load efficiency of 92% at 3.3V output. These modules provide a precisely regulated output voltage ranging from 0.75Vdc to 5.5Vdc, programmable via an external resistor over a wide range of input voltage (VIN = 10 – 14Vdc). Their open-frame construction and small footprint enable designers to develop cost- and space-efficient solutions. Standard features include remote On/Off, remote sense, output voltage adjustment, overcurrent and overtemperature protection. * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards ‡ January 14, 2016 ©2016 General Electric Company. All rights reserved. GE Data Sheet 12V Austin SuperLynxTM 16A: SIP Non-Isolated DC-DC Power Modules 10Vdc –14Vdc input; 0.75Vdc to 5.5Vdc output; 16A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Input Voltage Device Symbol Min Max Unit All VIN -0.3 15 Vdc All TA -40 85 °C All Tstg -55 125 °C Continuous Operating Ambient Temperature (see Thermal Considerations section) Storage Temperature Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit Operating Input Voltage VO,set ≤ VIN – 0.5V VIN 10.0 12.0 14.0 Vdc Maximum Input Current All IIN,max 9.5 Adc VO,set = 0.75 Vdc IIN,No load 40 mA VO,set = 5.0Vdc IIN,No load 100 mA All IIN,stand-by 2 mA Inrush Transient All I2t Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1μH source impedance; VIN, min to VIN, max, IO= IOmax ; See Test configuration section) All 30 Input Ripple Rejection (120Hz) All 30 (VIN=10.0V to 14.0V, IO=IO, max ) Input No Load Current (VIN = 12.0Vdc, Io = 0, module enabled) Input Stand-by Current (VIN = 12.0Vdc, module disabled) 0.4 A 2s mAp-p dB CAUTION: This power module is not internally fused. An input line fuse must always be used. This power module can be used in a wide variety of applications, ranging from simple standalone operation to being part of a complex power architecture. To preserve maximum flexibility, internal fusing is not included, however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a fast-acting fuse with a maximum rating of 15 A (see Safety Considerations section). Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s data sheet for further information. January 14, 2016 ©2016 General Electric Company. All rights reserved. Page 2 GE Data Sheet 12V Austin SuperLynxTM 16A: SIP Non-Isolated DC-DC Power Modules 10Vdc –14Vdc input; 0.75Vdc to 5.5Vdc output; 16A Output Current Electrical Specifications (continued) Parameter Output Voltage Set-point Device Symbol Min Typ Max Unit All VO, set -2.0 VO, set +2.0 % VO, set All VO, set -2.5%  +3.5% % VO, set All VO 0.7525 5.5 Vdc (VIN=IN, min, IO=IO, max, TA=25°C) Output Voltage (Over all operating input voltage, resistive load, and temperature conditions until end of life) Adjustment Range Selected by an external resistor Output Regulation Line (VIN=VIN, min to VIN, max) All  0.3  % VO, set Load (IO=IO, min to IO, max) All  0.4  % VO, set Temperature (Tref=TA, min to TA, max) All  0.4  % VO, set RMS (5Hz to 20MHz bandwidth) All  12 30 mVrms Peak-to-Peak (5Hz to 20MHz bandwidth) All  30 75 mVpk-pk   1000 μF  5000 μF Output Ripple and Noise on nominal output (VIN=VIN, nom and IO=IO, min to IO, max Cout = 1μF ceramic//10μFtantalum capacitors) External Capacitance ESR ≥ 1 mΩ All CO, max ESR ≥ 10 mΩ All CO, max  0 Output Current All Io Output Current Limit Inception (Hiccup Mode ) All IO, lim 16 Adc  180  % Io All IO, s/c  3  Adc η VIN= VIN, nom, TA=25°C VO,set = 0 75Vdc VO, set = 1.2Vdc η 85.0 % IO=IO, max , VO= VO,set VO,set = 1.5Vdc η 87.0 % VO,set = 1.8Vdc η 88.0 % VO,set = 2.5Vdc η 90.5 % VO,set = 3.3Vdc η 92.0 % VO,set = 5.0Vdc η 94.0 % All fsw  300  kHz All Vpk  200  mV (VO= 90% of VO, set) Output Short-Circuit Current (VO≤250mV) ( Hiccup Mode ) Efficiency Switching Frequency 79.0 % Dynamic Load Response (dIo/dt=2.5A/µs; VIN = VIN, nom; TA=25°C) Load Change from Io= 50% to 100% of Io,max; 1μF ceramic// 10 μF tantalum Peak Deviation Settling Time (Vo