AXB050X43-SRZ

GE Data Sheet 24 Austin LynxTM: Non-Isolated DC-DC Power Modules 20Vdc – 30Vdc input; 5.0 Vdc to 15 Vdc output; 70W Output Power Features RoHS Compliant ▪ Compliant to RoHS EU Directive 2011/65/EU and amended Directive (EU) 2015/863. (-Z versions) ▪ Compliant to REACH Directive (EC) No 1907/2006 ▪ Wide input voltage range: 20 to 30Vdc ▪ Output voltage programmable via external resistor: 5Vdc to 15Vdc ▪ High efficiency modules (VIN = 24Vdc) 97% at 12Vdc full load ▪ Low output ripple and noise ▪ Monotonic start-up into pre-bias output Applications ▪ Remote On/Off (Positive logic) ▪ Distributed power architectures ▪ Remote Sense ▪ Intermediate bus voltage applications ▪ ▪ Small size and low profile: Telecommunications equipment ▪ Wireless Base stations ▪ Industrial equipment ▪ Constant switching frequency ▪ LANs/WANs ▪ ▪ Wide operating temperature range (-40°C to 85°C) Enterprise Networks ▪ Latest generation IC’s (DSP, FPGA, ASIC) and Microprocessor powered applications ▪ Over current and Over temperature protection (nonlatching) ▪ ANSI/UL* 62368-1 and CAN/CSA† C22.2 No. 62368-1 Recognized, DIN VDE‡ 0868-1/A11:2017 (EN623681:2014/A11:2017) ▪ ISO** 9001 and ISO 14001 certified manufacturing facilities 50.8 mm x 12.7 mm x 8.1 mm (2.00 in x 0.50 in x 0.32 in) Description The Austin LynxTM 24V series SIP power module is a non-isolated DC-DC converter in an industry standard package that can deliver up to 70W of output power with a full load efficiency of 97% at 12Vdc output voltage (VIN = 24Vdc). The module operates over a wide input voltage range (VIN = 20 – 30Vdc) and provides a precisely regulated output voltage from 5 to 15Vdc, programmable via an external resistor. Standard features include remote On/Off, adjustable output voltage, remote sense, over current and over temperature protection. * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards ‡ February 18, 2021 ©2016 General Electric Company. All rights reserved. GE Data Sheet 24V Austin LynxTM: Non-Isolated DC-DC Power Modules 20Vdc –30Vdc input; 5Vdc to 15Vdc output; 70W Output Power Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit All VIN -0.3 36 Vdc All TA -40 85 °C All Tstg -55 125 °C Input Voltage Continuous Operating Ambient Temperature (see Thermal Considerations section) Storage Temperature Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit Operating Input Voltage All VIN 20.0 24.0 30.0 Vdc Maximum Input Current All IIN,max 4.5 Adc Vo = 5.0Vdc IIN,No Load 60 mAdc Vo = 12Vdc IIN,No Load 120 mAdc Vo = 5.0Vdc IIN,stand-by 3 mA Vo = 12Vdc IIN,stand-by 3 mA Inrush Transient All I2 t 1 A2 s Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1μH source impedance; VIN=20V to 30V, IO= IOmax ; See Figure 25) All Input Ripple Rejection (120Hz) All (VIN= 20V, VO= 12V, IO= 6A) Input No Load Current (VIN = 24Vdc, Io = 0, module enabled) Input Stand-by Current (VIN = 24Vdc, module disabled) 50 50 mAp-p dB CAUTION: These power modules can be used in a wide variety of applications ranging from simple standalone operation to an integrated part of sophisticated power architectures. To preserve maximum flexibility, no internal fuse has been provided. Also, extensive safety testing has shown that no external fuse is required to protect the unit. However, it is still recommended that some type of current-limiting power source be used to protect the module and evaluated in the end-use equipment. February 18, 2021 ©2016 General Electric Company. All rights reserved. Page 2 GE Data Sheet 24V Austin LynxTM: Non-Isolated DC-DC Power Modules 20Vdc –30Vdc input; 5Vdc to 15Vdc output; 70W Output Power Electrical Specifications (continued) Parameter Output Voltage Set-point Device Symbol Min Typ Max Unit All VO, set -2.0 VO, set +2.0 % VO, set All VO, set -3% ⎯ +3% % VO, set All VO 5.0 15.0 Vdc ⎯ 0.4 % VO, set (VIN=VN, min, IO=IO, max, TA=25°C) Output Voltage (Over all operating input voltage, resistive load, and temperature conditions until end of life) Adjustment Range Selected by an external resistor Output Regulation Line (VIN=VIN, min to VIN, max) All ⎯ Load (IO=IO, min to IO, max) All ⎯ ⎯ 0.4 % VO, set Temperature (Tref=TA, min to TA, max) All ⎯ 0.5 1 % VO, set All ⎯ 100 200 mVpk-pk CO, max 0 ⎯ 1,000 μF CO, max 0 ⎯ 2,000 μF Io,max Adc Output Ripple and Noise on nominal output (VIN=VIN, nom and IO=IO, min to IO, max Cout =0.01μF ceramic//10μFtantalum capacitors) Peak-to-Peak (5Hz to 20MHz bandwidth) External Capacitance ESR ≥ 1 mΩ All ESR ≥ 10 mΩ Output Current (VIN = VIN, nom) Vo = 5.0Vdc 0 10 Vo = 12.0Vdc All 0 6 Vo = 15.0Vdc 0 4.5 Output Power (VIN = VIN, nom) Vo =Vo,,min to Vo,,max All Po All IO, s/c 70 W ⎯ Adc Output Short-Circuit Current (VO≤250mV) ( Hiccup Mode ) ⎯ 20 Efficiency VIN= VIN, nom, TA=25°C IO=IO, max , VO= VO,set Switching Frequency (Fixed) February 18, 2021 VO,set = 5.0Vdc VO,set = 12.0Vdc VO,set = 15.0Vdc All η 93 % η 97 % η 97 % fsw ⎯ ©2016 General Electric Company. All rights reserved. 300 ⎯ kHz Page 3 GE Data Sheet 24V Austin LynxTM: Non-Isolated DC-DC Power Modules 20Vdc –30Vdc input; 5Vdc to 15Vdc output; 70W Output Power Electrical Specifications (continued) Parameter Device Symbol Min Typ Max Unit (dIO/dt=5A/s; VIN=VIN, nom TA=25°C) Load Change from Io= 50% to 100% of IO,max; No external output capacitors Peak Deviation (Vo = 12Vdc) All Vpk 220 mV Settling Time (VO