EQD075A641Z

Data Sheet August 12, 2010 EQD075 Series (Eighth-Brick)DC-DC Converter Power Modules 18- 60Vdc Input; 3.3 to 5.0Vdc Output; 75W RoHS Compliant Features Applications  Distributed power architectures  Wireless Networks  Optical and Access Network Equipment  Enterprise Networks Options  Positive logic, Remote On/Off  Auto restart after fault protection shutdown  Pin length  Compliant to RoHS EU Directive 2002/95/EC (-Z versions)  Compliant to RoHS EU Directive 2002/95/EC with lead solder exemption (non-Z versions)  High efficiency – 92% at 5.0Vo, full load, 24Vin  Industry standard Eighth brick footprint and pin out 57.9 mm x 22.8 mm x 8.5 mm (2.28 in. x 0.90 in. x 0.335 in.)  3:1 Input voltage range: 18 - 60 Vdc  Input under/overvoltage protection  Output overcurrent/voltage protection  Over-temperature protection  Tightly regulated output  Remote sense  No reverse current during output shutdown  Negative logic, Remote On/Off  Output voltage programmable from 3.0 Vdc to 5.5Vdc  Input-to-output isolation (Basic Insulation: 1500V)  Wide operating temperature range (-40°C to 85°C)  Meets conducted emissions requirements of FCC/EN55022 Class A without external filter Within FCC and VDE Class A Radiated Limits  UL* 60950-1Recognized, CSA† C22.2 No. 60950-103 Certified, and VDE‡ 0805:2001-12 (EN60950-1) Licensed  Meets the voltage and current requirements for ETSI 300-132-2 and complies with and licensed for Basic insulation rating per EN60950-1  ISO** 9001 and ISO 14001 certified manufacturing facilities Description The EQD075 series DC-DC converters are a new generation of open-frame DC/DC power modules designed to support a 3:1 input voltage range, that allows operation in both 24V or 48V nominal input voltage systems, thus eliminating the need for separate power modules for each input voltage range. These single output DC-DC converters operate over an input voltage range of 18 to 60 Vdc. The series is also designed to provide a wide output voltage set/trim range of 3.0 to 5.5Vdc, with output current up to 20A at 3.3Vdc or 15A at 5.0Vdc in an industry standard eighth brick package. The output is isolated from the input, allowing versatile polarity configurations and grounding connections. Built in filtering for both input and output minimizes the need for external filtering. * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards ‡ Document No: DS05-031 ver. 1.31 PDF name: EQD075A.pdf Data Sheet August 12, 2010 EQD075 Series Single Output: Eighth Brick Power Modules: 18-60Vdc Input; 3.3 to 5.0Vdc Output; 75W Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit Input Voltage Continuous A VIN -0.3 60 Vdc VIN, trans -0.3 75 Vdc A TA -40 85 °C A Tstg -55 125 °C 1500 Vdc Transient (100 ms) Operating Ambient Temperature (see Thermal Considerations section) Storage Temperature I/O Isolation (100% factory Hi-Pot tested) Input - Output A Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit A VIN 18 24/48 60 Vdc A IIN,max 6 Adc A IIN, Stby 25 mA A IIN, NL 110 mA Inrush Transient A It 2 1 As Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 12μH source impedance; o Ta 25 C, Cin = 33μF) A 30 mAp-p Input Ripple Rejection (100 - 120Hz) A Operating Input Voltage Maximum Input Current (VIN=0 to VIN, max , Vo = Vo,set, IO=IO, max ) Input Stand-by Current Module on / off disabled (VIN = VIN, nom, Vo = 0 V) Input No Load Current Module on / off enabled (VIN = VIN, nom, Io = 0 A) 50 2 dB CAUTION: This power module is not internally fused. An input line fuse must always be used. This power module can be used in a wide variety of applications, ranging from simple standalone operation to being part of a complex power architecture. To preserve maximum flexibility, internal fusing is not included, however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a very fast acting surface mount fuse with a maximum rating of 6.3 A (see Safety Considerations section). Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s data sheet for further information. LINEAGE POWER 2 Data Sheet August 12, 2010 EQD075 Series Single Output: Eighth Brick Power Modules: 18-60Vdc Input; 3.3 to 5.0Vdc Output; 75W Electrical Specifications (continued) Parameter Output Voltage Set-point Device Symbol Min A VO, set -1.6 A VO -3 Typ Max Unit +1.6 % VO, set +3 % VO (VIN = VIN, min=24/48, IO =IO, max, TA =25°C) Output Voltage - (Over all line, load, and Temp Conditions Until end of life) Output Regulation Line (VIN = VIN, min to VIN, max) A  0.05 0.2 % VO, nom Load (IO = IO, min to IO, max) A  0.05 0.2 % VO, nom Temperature (Tref =TA, min to TA, max) A  0.25 1 % VO, nom RMS (5Hz to 20MHz bandwidth) A  5 20 mVrms Peak-to-Peak (5Hz to 20MHz bandwidth) A  50 80 mVpk-pk CO 0  5000 μF Output Ripple and Noise on nominal output (VIN =VIN, nom and IO = IO, min to IO, max, Cout = 1μF ceramic // 10μF Tantalum capacitor) 3.3 to 5.0V output External Capacitance ESR ≥ 10 mΩ A Output Current @ Vo = 3.3V A Io 0 20 A dc @ Vo = 5V A Io 0 15 A dc Output Current Limit Inception (Hiccup Mode) (Vo = 95% Vo, set ) A IO, lim 105 115 150 % Io, max Output Short-Circuit Current A IO, s/c   150 % Io, max @ Vo = 3.3V, IO = 20A A η 87 % @ Vo = 5V, IO = 15A A η 92 % @ Vo = 3.3V, IO = 20A A η 88 % @ Vo = 5V, IO = 15A A η 90 A fsw o VO ≤ 250 mV @ 25 C Efficiency VIN= 24V, TA=25°C, IO= IO, max A VIN= 48V, TA=25°C, IO= IO, max A Switching Frequency LINEAGE POWER 160  %  KHz 3 Data Sheet August 12, 2010 EQD075 Series Single Output: Eighth Brick Power Modules: 18-60Vdc Input; 3.3 to 5.0Vdc Output; 75W Electrical Specifications (continued) Parameter Device Symbol Min A Vpk  ts  Vpk  ts  Typ Max Unit 2 4 %Vo 80 150 s 2 4 %Vo 80 150 s Dynamic Load Response (dIo/dt= 1A / 10s; VIN = VIN, nom; TA=25°C) Load Change from Io= 50% to 75% of Io,max Peak Deviation Settling Time (Vo