EQW006A0B1-SZ

Data Sheet October 2, 2009 EQW006 Series, Eighth-Brick Power Modules: DC-DC Converter 36 –75Vdc Input; 12Vdc Output; 6A Output Current RoHS Compliant Features ƒ Compliant to RoHS EU Directive 2002/95/EC (-Z versions) ƒ Compliant to ROHS EU Directive 2002/95/EC with lead solder exemption (non-Z versions) ƒ ƒ ƒ Delivers up to 6A output current High efficiency: 91.5% at 12V full load (VIN = 48Vdc) Industry-Standard Eighth-brick foot print: 57.9 mm x 22.8 mm x 8.52 mm (2.28 in x 0.90 in x 0.335 in) Applications ƒ ƒ ƒ ƒ Low output ripple and noise Surface mount or through hole Cost efficient open frame design Remote On/Off positive logic (primary referenced) ƒ Distributed power architectures ƒ Remote Sense ƒ Wireless networks ƒ Adjustable output voltage ƒ Access and optical network Equipment ƒ Constant switching frequency (330 kHz) ƒ Enterprise Networks ƒ Output over voltage and over current protection ƒ Latest generation IC’s (DSP, FPGA, ASIC) and Microprocessor powered applications ƒ Over temperature protection ƒ Input undervoltage lockout ƒ Wide operating temperature range (-40°C to 85°C) ƒ UL* 60950 Recognized, CSA C22.2 No. 60950-00 ‡ rd Certified, and VDE 0805 (IEC60950, 3 edition) Licensed ƒ CE mark meets 73/23/EEC and 93/68/EEC directives ƒ ISO** 9001 and ISO14001 certified manufacturing facilities ƒ Meets the voltage and current requirements for ETSI 300-132-2 and complies with and licensed for Basic rd insulation rating per IEC60950 3 edition Options ƒ Remote On/Off logic (positive or negative) ƒ Surface Mount (-S Suffix) ƒ Short Pins † § Description The EQW series, Eighth-brick power modules are isolated dc-dc converters that can deliver up to 6A of output current and provide a precisely regulated output voltage of 12Vdc over a wide range of input voltages (Vi = 36 75Vdc). The modules achieve full load efficiency of 91.5% at 12Vdc output voltage. The open frame modules construction, available in both surface-mount and through-hole packaging, enable designers to develop cost- and space-efficient solutions. Standard features include remote On/Off, remote sense, output voltage adjustment, over voltage, over current and over temperature protection. * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards ‡ Document No: DS03-119 ver. 1.09 PDF name: eqw006_series_ds.pdf Data Sheet October 2, 2009 EQW006 Series, Eight-Brick Power Modules: DC-DC Converter 36 – 75Vdc Input; 12Vdc Output; 6A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit Input Voltage Continuous All VIN -0.3 80 Vdc Transient (100 ms) All VIN,trans -0.3 100 Vdc All TA -40 85 °C Storage Temperature All Tstg -55 125 °C I/O Isolation voltage (100% factory Hi-Pot tested) All ⎯ ⎯ 1500 Vdc Operating Ambient Temperature (see Thermal Considerations section) Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ 36 48 Max Unit 75 Vdc 2.5 Adc Operating Input Voltage All VIN Maximum Input Current All IIN,max All IIN,No load 75 mA All IIN,stand-by 3 mA Inrush Transient All It Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1μH source impedance; VIN, min to VIN, max, IO= IOmax ; See Test configuration section) All 13 Input Ripple Rejection (120Hz) All 50 (VIN= VIN, min to VIN, max, IO=IO, max) Input No Load Current (VIN = VIN, nom, IO = 0, module enabled) Input Stand-by Current (VIN = VIN, nom, module disabled) EMC,EN5022 2 1 2 As mAp-p dB See EMC Considerations section CAUTION: This power module is not internally fused. An input line fuse must always be used. This power module can be used in a wide variety of applications, ranging from simple standalone operation to an integrated part of sophisticated power architectures. To preserve maximum flexibility, internal fusing is not included, however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a time-delay fuse with a maximum rating of 6 A (see Safety Considerations section). Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s data sheet for further information. LINEAGE POWER 2 Data Sheet October 2, 2009 EQW006 Series, Eight Brick Power Modules: DC-DC Converter 36 – 75Vdc Input; 12Vdc Output; 6A Output Current Electrical Specifications (continued) Parameter Output Voltage Set-point Device Symbol Min Typ Max Unit All VO, set 11.8 12.0 12.2 Vdc All VO 11.6 ⎯ 12.4 Vdc All VO 10.8 ⎯ 13.2 Vdc (VIN=IN, min, IO=IO, max, TA=25°C) Output Voltage (Over all operating input voltage, resistive load, and temperature conditions until end of life) Adjustment Range Selected by external resistor Output Regulation Line (VIN=VIN, min to VIN, max) All ⎯ ⎯ 0.1 % VO, set Load (IO=IO, min to IO, max) All ⎯ ⎯ 0.1 % VO, set Temperature (Tref=TA, min to TA, max) All ⎯ 0.2 ⎯ % VO, set RMS (5Hz to 20MHz bandwidth) All ⎯ 15 25 mVrms Peak-to-Peak (5Hz to 20MHz bandwidth) All ⎯ 40 75 mVpk-pk Output Ripple and Noise on nominal output measured with 10μF Tantalum, 1μF ceramic (VIN=VIN, nom ,IO= IO, max , TA=TA, min to TA, max) External Capacitance All CO, max 0 ⎯ 1000 μF Output Current All Io 0 ⎯ 6 Adc All IO, lim ⎯ 7.0 ⎯ Adc All IO, s/c ⎯ 0.5 ⎯ Adc All η 91.5 % All fsw 300 kHz Peak Deviation All Vpk ⎯ 200 ⎯ mV Settling Time (Vo