EQW030A0F1Z

GE Data Sheet EQW010-040 Series (Eighth-Brick) DC-DC Converter Power Modules 36–75Vdc Input; 1.0 to 12.0Vdc Output; 10 to 40A Output Current Features RoHS Compliant  Compliant to RoHS EU Directive 2011/65/EU (Z versions)  Compliant to RoHS EU Directive 2011/65/EU under exemption 7b (Lead solder exemption). Exemption 7b will expire after June 1, 2016 at which time this produc twill no longer be RoHS compliant (non-Z versions)  Compatible in a Pb-free or SnPb reflow environment  High efficiency – 92% at 3.3V full load  Industry standard, DOSA compliant, Eighth brick footprint 57.9mm x 22.9mm x 8.5mm (2.28in x 0.9in x 0.335in) Applications   Distributed power architectures  Wireless networks  Access and optical network Equipment  Enterprise Networks  Latest generation IC’s (DSP, FPGA, ASIC) and Microprocessor powered applications Options Wide Input voltage range: 36-75 Vdc  Tightly regulated output  Constant switching frequency  Positive Remote On/Off logic  Input under/over voltage protection  Output overcurrent/voltage protection  Over-temperature protection  Remote sense  No minimum load required  No reverse current during output shutdown  Negative Remote On/Off logic  Over current/Over temperature/Over voltage protections (Auto-restart)  Heat plate versions (-C, -H)  Output Voltage adjust: 80% to 110% of Vo,nom  Surface Mount version (-S)  Operating temperature range (-40°C to 85°C)  UL* 60950-1Recognized, CSA† C22.2 No. 60950-1-03 Certified, and VDE‡ 0805:2001-12 (EN60950-1) Licensed  CE mark meets 73/23/EEC and 96/68/EEC directives§  Meets the voltage and current requirements for ETSI 300-132-2 and complies with and licensed for Basic insulation rating per EN60950-1  ISO**9001 and ISO 14001 certified manufacturing facilities Description The EQW010/040 series DC-DC converters are designed to provide up to 40A output current in an industry standard eighth brick package. These DC-DC converters operate over an input voltage range of 36 to 75 Vdc and provide a single, preciselyregulated output. The output is isolated from the input, allowing versatile polarity configurations and grounding connections. Built in filtering for both the input and output minimizes the need for external filtering. October 1, 2015 ©2012 General Electric Company. All rights reserved. GE Data Sheet EQW010-040 Series (Eighth-Brick) DC-DC Converter Power Modules 36–75Vdc Input; 1.0 to 12.0Vdc Output; 10 to 40A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit All VIN -0.3 80 Vdc Input Voltage Continuous Transient (100 ms) All VIN,trans -0.3 100 Vdc All TA -40 85 °C Storage Temperature All Tstg -55 125 °C I/O Isolation voltage (100% factory Hi-Pot tested) All   1500 Vdc Operating Ambient Temperature (see Thermal Considerations section) Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit Operating Input Voltage All VIN 36 48 75 Vdc Maximum Input Current Adc All, except B IIN,max 3.2 3.5 (VIN= VIN, min to VIN, max, IO=IO, max) B IIN,max 3.4 3.7 Adc Input No Load Current All IIN,No load 75 mA All IIN,stand-by 22 mA Inrush Transient All I2t 0.5 A2s Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1μH source impedance; VIN, min to VIN, max, IO= IOmax ; See Test configuration section) All 20 mAp-p Input Ripple Rejection (120Hz) All (VIN = VIN, nom, IO = 0, module enabled) Input Stand-by Current (VIN = VIN, nom, module disabled) 50 dB CAUTION: This power module is not internally fused. An input line fuse must always be used. This power module can be used in a wide variety of applications, ranging from simple standalone operation to an integrated part of sophisticated power architectures. To preserve maximum flexibility, internal fusing is not included, however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a time-delay fuse with a maximum rating of 8 A (see Safety Considerations section). Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s data sheet for further information. October 1, 2015 ©2012 General Electric Company. All rights reserved. Page 2 GE Data Sheet EQW010-040 Series (Eighth-Brick) DC-DC Converter Power Modules 36–75Vdc Input; 1.0 to 12.0Vdc Output; 10 to 40A Output Current Electrical Specifications (continued) Parameter Nominal Output Voltage Set-point VIN=VIN, min, IO=IO, max, TA=25°C) Output Voltage (Over all operating input voltage, resistive load, and temperature conditions until end of life) Output Regulation Line (VIN=VIN, min to VIN, max) Load (IO=IO, min to IO, max) Temperature (Tref=TA, min to TA, max) Output Ripple and Noise on nominal output (VIN=VIN, nom ,IO= IO, max , TA=TA, min to TA, max) RMS (5Hz to 20MHz bandwidth) Device Symbol Min Typ Max B VO, set 11.76 12.0 12.24 Unit Vdc A VO, set 4.90 5.0 5.10 Vdc F VO, set 3.23 3.3 3.37 Vdc G VO, set 2.45 2.5 2.55 Vdc Y VO, set 1.76 1.8 1.84 Vdc M VO, set 1.47 1.5 1.53 Vdc P VO, set 1.18 1.2 1.22 Vdc S1R0 VO, set 0.98 1.0 1.02 Vdc All VO -3.0  +3.0 % VO, set   0.2 5 0.2 5 1.0 % VO, set mV % VO, set mV % VO, set B, A, F, G Y, M, P, S1R0 B, A, F, G Y, M, P, S1R0 All     B   30 mVrms B   100 mVpk-pk RMS (5Hz to 20MHz bandwidth) All, except B   25 mVrms Peak-to-Peak (5Hz to 20MHz bandwidth) All, except B   75 mVpk-pk Peak-to-Peak (5Hz to 20MHz bandwidth) External Capacitance Output Current Output Current Limit Inception (Hiccup Mode ) (VO= 90% of VO, set) Output Short-Circuit Current (VO≤250mV) ( Hiccup Mode ) Efficiency B CO, max 0  1,500 μF A F, G, Y, M, P, S1R0 B CO, max 0  10,000 μF CO, max 0*  20,000 μF Io 0  10 Adc A Io 0  20 Adc F Io 0  30 Adc G Io 0  35 Adc Y, M, P, S1R0 Io 0 40 All, except G G IO, lim IO, lim 105 103  115 115 130 130 Adc % Io % Io All IO, s/c  130 150 Arms B η 93.0 VIN= VIN, nom, TA=25°C A η 91.7 % IO=IO, max , VO= VO,set F η 92.0 % G η 89.8 % Y η 88.3 % M η 87.1 % % Switching Frequency % P η 85.0 S1R0 η 83.2 % All fsw 420 kHz * Note: For 1.0VO (S1R0) and 1.2 VO (P) device codes, external capacitance, CO, should be 1000uF minimum to achieve monotonic start-up with very light load (≤ 2Amp). October 1, 2015 ©2012 General Electric Company. All rights reserved. Page 3 GE Data Sheet EQW010-040 Series (Eighth-Brick) DC-DC Converter Power Modules 36–75Vdc Input; 1.0 to 12.0Vdc Output; 10 to 40A Output Current Electrical Specifications (continued) Parameter Device Symbol Min All Vpk  All ts  All Vpk  All ts  Typ Max Unit 3  % VO, set 200  s 5  % VO, set 200  s Dynamic Load Response (dIo/dt=0.1A/s; VIN = VIN, nom; TA=25°C) Load Change from Io= 50% to 75% or 25% to 50% of Io,max; Peak Deviation Settling Time (Vo