EVW010A0B41Z

GE Data Sheet EVW010A0B Series (Eighth-Brick) DC-DC Power Modules 36–75Vdc Input; 12.0Vdc Output; 10A Output Current Features RoHS Compliant ▪ Compliant to RoHS EU Directive 2011/65/EU and amended Directive (EU) 2015/863. (Z versions) ▪ Compliant to REACH Directive (EC) No 1907/2006 ▪ Compatible in a Pb-free or SnPb reflow environment ▪ High efficiency – 93.5% at 12V full load ▪ Industry standard, DOSA compliant, Eighth brick footprint 57.9mm x 22.9mm x 7.8mm (2.28in x 0.90in x 0.31in) ▪ Wide Input voltage range: 36-75 Vdc ▪ Tightly regulated output Applications ▪ Constant switching frequency ▪ Distributed Power Architectures ▪ Positive Remote On/Off logic ▪ Wireless Networks ▪ Input under/over voltage protection ▪ Access and Optical Network Equipment ▪ Output overcurrent/voltage protection ▪ Enterprise Networks including Power over Ethernet (PoE) ▪ Over-temperature protection ▪ Remote sense ▪ No minimum load required ▪ No reverse current during output shutdown ▪ Output Voltage adjust: 80% to 110% of Vo,nom ▪ Operating temperature range (-40°C to 85°C) ▪ ANSI/UL* 62368-1 and CAN/CSA† C22.2 No. 62368-1 Recognized, DIN VDE‡ 0868-1/A11:2017 (EN623681:2014/A11:2017) ▪ CE mark meets 2014/35/EU directive§ ▪ Meets the voltage and current requirements for ETSI 300-132-2 and complies with and licensed for Basic insulation ▪ 2250 Vdc Isolation tested in compliance with IEEE 802.3¤ PoE standards ▪ ISO**9001 and ISO 14001 certified manufacturing facilities Options ▪ Negative Remote On/Off logic ▪ Over current/Over temperature/Over voltage protections (Auto-restart) ▪ Heat plate versions (-H) ▪ Surface Mount version (-S) Description The EVW010A0B, Eighth-brick low-height power module is an isolated dc-dc converters that can deliver up to 10A of output current and provide a precisely regulated output voltage of 12V over a wide range of input voltages (VIN = 36 - 75Vdc). The modules achieve typical full load efficiency of 93.5%. The open frame modules construction, available in both surface-mount and through-hole packaging, enable designers to develop cost and space efficient solutions. Standard features include remote On/Off, remote sense, output voltage adjustment, overvoltage, overcurrent and overtemperature protection. March 18, 2021 ©2012 General Electric Company. All rights reserved. GE Data Sheet EVW010A0B Series (Eighth-Brick) DC-DC Power Modules 36–75Vdc Input; 12.0Vdc Output; 10A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit Continuous All VIN -0.3 80 Vdc Transient (≤100 ms) All VIN,trans -0.3 100 Vdc All TA -40 85 °C Storage Temperature All Tstg -55 125 °C I/O Isolation voltage (100% factory Hi-Pot tested) All ⎯ ⎯ 2250 Vdc Input Voltage Operating Ambient Temperature (see Thermal Considerations section) Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit All VIN 36 48 75 Vdc All IIN,max 3.4 3.7 Adc All IIN,No load 75 mA All IIN,stand-by 20 mA Inrush Transient All I2t 0.5 A2s Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1μH source impedance; VIN, min to VIN, max, IO= IOmax ; See Test configuration section) All 20 mAp-p Input Ripple Rejection (120Hz) All 50 dB Operating Input Voltage Maximum Input Current (VIN= VIN, min to VIN, max, IO=IO, max) Input No Load Current (VIN = VIN, nom, IO = 0, module enabled) Input Stand-by Current (VIN = VIN, nom, module disabled) CAUTION: This power module is not internally fused. An input line fuse must always be used. This power module can be used in a wide variety of applications, ranging from simple standalone operation to an integrated part of sophisticated power architectures. To preserve maximum flexibility, internal fusing is not included, however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a time-delay fuse with a maximum rating of 8 A (see Safety Considerations section). Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s data sheet for further information. March 18, 2021 ©2012 General Electric Company. All rights reserved. Page 2 GE Data Sheet EVW010A0B Series (Eighth-Brick) DC-DC Power Modules 36–75Vdc Input; 12.0Vdc Output; 10A Output Current Electrical Specifications (continued) Parameter Nominal Output Voltage Set-point VIN=VIN, min, IO=IO, max, TA=25°C) Output Voltage (Over all operating input voltage, resistive load, and temperature conditions until end of life) Output Regulation Line (VIN=VIN, min to VIN, max) Load (IO=IO, min to IO, max) Temperature (Tref=TA, min to TA, max) Output Ripple and Noise on nominal output (VIN=VIN, nom ,IO= IO, max , TA=TA, min to TA, max) RMS (5Hz to 20MHz bandwidth) Device Symbol Min Typ Max Unit All VO, set 11.76 12.0 12.24 Vdc All VO -3.0 ⎯ +3.0 % VO, set All All All ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ 0.2 0.2 1.0 % VO, set % VO, set % VO, set All ⎯ ⎯ 30 mVrms mVpk-pk ⎯ ⎯ 100 External Capacitance All CO 100 ⎯ 2,000 μF Output Current Output Current Limit Inception (Hiccup Mode ) (VO= 90% of VO, set) Output Short-Circuit Current (VO≤250mV) ( Hiccup Mode ) Efficiency All All Io IO, lim 0 105 ⎯ 115 10 130 Adc % Io All IO, s/c ⎯ 3 5 Arms All η 93.5 % All fsw 370 kHz All Vpk ⎯ 3 ⎯ % VO, set All ts ⎯ 200 ⎯ s All Vpk ⎯ 5 ⎯ % VO, set All ts ⎯ 200 ⎯ s Device Symbol Min Typ Max Unit Peak-to-Peak (5Hz to 20MHz bandwidth) All VIN= VIN, nom, TA=25°C IO=IO, max , VO= VO,set Switching Frequency (Input ripple is ½ fsw) Dynamic Load Response (dIo/dt=0.1A/s; VIN = VIN, nom; TA=25°C) Load Change from Io= 50% to 75% or 25% to 50% of Io,max; Peak Deviation Settling Time (Vo