IND033

IND033 Hornet: Non-Isolated DC-DC Voltage Regulator Modules 12Vdc input; 0.8Vdc to 5.5Vdc output; 33W Max Power Vout+ Vin+ VIN PGOOD VOUT SENSE MODULE Applications ✓ ✓ ✓ Cin Industrial Equipment Control Boards Test Equipment Co ON/OFF GND Electrical Features Mechanical Features • • • 12V Input voltage with up to ±20% Tolerance Output voltage programmable from 0.8Vdc to 5.5Vdc via external resistor Remote On/Off for optional external control Power Good signal for external monitoring Fixed switching frequency Output overcurrent protection (non-latching) • • • • TRIM RTrim Small size: 12.2 mm x 12.2 mm x 7.25 mm (0.48 in x 0.48 in x 0.29 in) Operating range: -40°C to 105°C ambient Operating shock to 40G per Mil Std. 810G, Method 516.4 Procedure I Operating vibration per Mil Std. 810G, Method 514.5 Procedure I • • • Process and Safety • • Qualified for 1000h High Temperature Operating Bias, 1000h 85RH/85°C Temperature, Humidity and Bias, 700 cycle -40 to 125°C thermal cycling ANSI/UL* 62368-1 and CAN/CSA† C22.2 No. 62368-1 Recognized, DIN VDE‡ 0868-1/A11:2017 (EN62368-1:2014/A11:2017) ISO** 9001 and ISO 14001 certified manufacturing facilities Compliant to RoHS Directive 2011/65/EU and amended Directive (EU) 2015/863 Compliant to REACH Directive (EC) No 1907/2006 Compatible in a Pb-free or SnPb reflow environment. Suitable for aqueous clean. Suitable for conformal coating with dip and vapor deposition. Conformal coating can provide the protection to meet Salt Fog Test per IEC 60068-2-52 (Severity 3) and Mixed Gas Flow test per Telcordia GR-3108 Outdoor Levels. 3 year warranty • • • • • • • • Device Code Input Voltage Output Voltage Output Current (Max.) On/Off Logic Comcode IND033 9.6 – 14.4**Vdc 0.8 – 5.5Vdc 6A Negative 1600102898A Thermal Performance Full rated output with natural convection up to 100°C at 1.2Vout and up to 90°C at 5Vout. Thermal curves for 1.2V, 1.8V and 5Vout below. 6.5 6.5 6.0 6.0 NC NC 5.5 1.2 Vout Current (A) vs. Temp ( C) 5.5 0.5m/s (100LFM) 5.0 1.8 Vout Current (A) vs. Temp ( C) 0.5m/s (100LFM) 5.0 4.5 55 65 May 12, 2021 75 85 95 105 4.5 55 65 75 85 95 ©2017 General Electric Company. All rights reserved. 105 Page 1 Electrical Specifications Parameter Device Symbol Min Typ Max Unit All VIN 9.6 12 14.4** Vdc VO,set = 5Vdc IIN,No load Operating Input Voltage Input No Load Current (VIN = 12.0Vdc, IO = 0, module enabled) External Capacitance, Ceramic ESR ≥ 1 mΩ All Efficiency 12VINDC, TA=25°C, I=12A, Vo=1.2 to 5Vdc CO, max 55 10 ⎯ mA 22* μF η 86(1.2V), 89(1.8V), 93(3.3V), 94(5V) Switching Frequency All fsw ⎯ 600 ⎯ kHz Output Voltage (Over all line, load, and temperature conditions until end of life) All VO, set -3.0 ⎯ +3.0 % VO, set On/Off Logic High (MODULE OFF) Input High Voltage All VIH 3.0 ⎯ 14.4 Vdc On/ Off Logic Low (MODULE ON) Input Low Voltage PGOOD (Power Good) Signal Interface Open Drain, Vsupply  5VDC Overvoltage threshold for PGOOD Undervoltage threshold for PGOOD All VIL -0.2 ― 0.4 Vdc 112.5 87.5 Pulldown resistance of PGOOD pin All Sink current capability into PGOOD pin All % %VO, set %VO, set  30 5 mA *Additional External Capacitance possible using Tunable Loop ** For 0.8≤Vout