KNW015A0F41Z

GE Data Sheet KNW015A0F-88 Series Power Modules 36 – 75Vdc Input; 3.3Vdc Output; 15A Output Current Features RoHS Compliant Applications  Compliant to RoHS EU Directive 2011/65/EU (Z versions)  Compliant to RoHS EU Directive 2011/65/EU under exemption 7b (Lead solder exemption). Exemption 7b will expire after June 1, 2016 at which time this produc twill no longer be RoHS compliant (non-Z versions)  Delivers up to 15A output current  High efficiency – 92% at 3.3V full load  Small size and low profile: 33.0 mm x 22.9 mm x 9.3 mm (1.30 in x 0.9 in x 0.37 in)  Industry standard DOSA footprint  -20% to +10% output voltage adjustment trim  Remote on/off  Remote sense  No reverse current during output shutdown  Distributed power architectures  Wireless networks  Access and optical networking equipment including Power over Ethernet (PoE)  Over temperature protection  Output overcurrent/overvoltage protection (latching)  Enterprise networks  Wide operating temperature range (-40°C to 85°C)  Latest generation IC’s (DSP, FPGA, ASIC) and Microprocessor powered applications  2250 Vdc Isolation tested in compliance with IEEE 802.3¤ PoE standards  Meets the voltage isolation requirements for ETSI 300-132-2 and complies with and is licensed for Basic Insulation rating per EN60950-1  ANSI/UL* 60950-1, 2nd Ed. Recognized, CSA† C22.2 No. 60950-1-07 Certified, and VDE‡ 0805-1 (EN60950-1, 2nd Ed.) Licensed CE mark meets 2006/95/EC directive§ Options  Negative Remote On/Off logic  Over current/Over temperature/Over voltage protections (auto-restart)  Surface Mount (Tape and Reel, -SR Suffix)  Shorter lead trim   ISO** 9001 and ISO 14001 certified manufacturing facilities Description The KNW015A0F-88 (Sixteenth-brick) series power modules are isolated dc-dc converters that operate over a wide input voltage range of 36 to 75Vdc and provide a single precisely regulated output. The output is fully isolated from the input, allowing versatile polarity configurations and grounding connections. The modules exhibit high efficiency, typical efficiency of 92% for 3.3V/15A. These open frame modules are available either in surface-mount (-SR) or in through-hole (TH) form. ¤ IEEE and 802 are registered trademarks of the Institute of Electrical and Electronics Engineers, Incorporated. * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. ‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V. § This product is intended for integration into end-use equipment. All of the required procedures of end-use equipment should be followed. ** ISO is a registered trademark of the International Organization of Standards October 5, 2015 ©2012 General Electric Company. All rights reserved. GE Data Sheet KNW015A0F-88 Series Power Modules 36 – 75Vdc Input; 3.3Vdc Output; 15A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit Operating Input Voltage Continuous All VIN -0.3 80 Vdc Transient (100 ms) All VIN,trans -0.3 100 Vdc All TA -40 85 °C Storage Temperature All Tstg -55 125 °C I/O Isolation voltage (100% Factory Hi-Pot tested) All   2250 Vdc Operating Ambient Temperature (see Thermal Considerations section) Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Operating Input Voltage Maximum Input Current (VIN= VIN, min to VIN, max, IO=IO, max) Device Symbol Min Typ Max All VIN 36 48 75 Vdc Adc All IIN,max 1.8 All IIN,No load 45 All IIN,stand-by 6 Inrush Transient All I2t Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1μH source impedance; VIN, min to VIN, max, IO= IOmax ; See Test configuration section) All 30 mAp-p Input Ripple Rejection (120Hz) All 60 dB Input No Load Current (VIN = VIN, nom, IO = 0, module enabled) Input Stand-by Current (VIN = VIN, nom, module disabled) EMC, EN55022 2.0 Unit mA 8 0.1 mA A2s See EMC Considerations section CAUTION: This power module is not internally fused. An input line fuse must always be used. This power module can be used in a wide variety of applications, ranging from simple standalone operation to an integrated part of sophisticated power architectures. To preserve maximum flexibility, internal fusing is not included, however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a time-delay fuse with a maximum rating of 5 A (see Safety Considerations section). Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s data sheet for further information. October 5, 2015 ©2012 General Electric Company. All rights reserved. Page 2 GE Data Sheet KNW015A0F-88 Series Power Modules 36 – 75Vdc Input; 3.3Vdc Output; 15A Output Current Electrical Specifications (continued) Parameter Output Voltage Set-point (VIN=VIN, min, IO=IO, max, TA=25°C) Device Symbol Min Typ Max Unit All VO, set 3.25 3.3 3.35 Vdc All VO -3.0 +3.0 % VO, set All VO, adj -20.0 +10.0 % VO, set Output Voltage (Over all operating input voltage, resistive load, and temperature conditions until end of life) Adjustment Range Selected by an external resistor Output Regulation Line (VIN=VIN, min to VIN, max) All   0.1 % VO, set Load (IO=IO, min to IO, max) All   0.1 % VO, set Temperature (Tref=TA, min to TA, max) All   1.0 % VO, set All   25 75 30 100 mVrms mVpk-pk Output Ripple and Noise on nominal output (VIN=VIN, nom ,IO= IO, max , TA=TA, min to TA, max) RMS (5Hz to 20MHz bandwidth) Peak-to-Peak (5Hz to 20MHz bandwidth) External Capacitance All CO, max 20,000 μF Rated Output Current All IO, Rated 0  15 Adc All IO, lim 115 120 130 %IO, Rated All IO, s/c  20  Arms All η All fsw  Peak Deviation All Vpk Settling Time (VO