SHHN000A3CL41Z

GE Datasheet 9Vdc – 36Vdc input; +15V, -15V Dual Output, 0.3A 9W Output SHHN000A3 HAMMERHEAD* Series; DC-DC Converter Power Modules Features • Compliant to RoHS Directive 2011/65/EU and amended Directive (EU) 2015/863.(-Z versions) • Compliant to REACH Directive (EC) No 1907/2006 • Wide Input Voltage Range, 9Vdc to 36Vdc • No minimum load for no damage operation • Constant switching frequency • Low output ripple and noise • Small Size and low profile, follows industry standard 1x1 footprint 27.9mm x 24.4mm x 8.5mm (MAX) (1.10 x 0.96 x 0.335 in) Applications • Surface mount (SMT) or Through hole (TH) • Hybrid power architectures • Reflow process compliant, both SMT and TH versions • Industrial markets • Positive and Negative Remote On/Off logic • Output overcurrent, overvoltage protection • Over-temperature protection • Wide operating temperature range (-40°C to 85°C) • ANSI/UL* 62368-1 and CAN/CSA† C22.2 No. 62368-1 Recognized, DIN VDE‡ 0868-1/A11:2017 (EN623681:2014/A11:2017) • CE mark meets 2014/35/EU directive§ • Withstands 1600Vdc Isolation Voltage. • ISO** 9001 and ISO 14001 certified manufacturing facilities RoHS Compliant Description The SHHN000A3A HAMMERHEAD* series power modules are isolated dc-dc converters that designed to operate over a wide input voltage range of 9 Vdc -36Vdc and provide a set of regulated dual polarity output voltages at +15.0Vdc and -15.0Vdc. The outputs are fully isolated from the input, allowing versatile polarity configurations and grounding connections. The modules exhibit a minimum efficiency of 84.0% at full load and nominal input. Built-in filtering for both input and output minimizes external filtering components. The module is fully self-protected with output over-current and over-voltage, over-temperature and input under voltage shutdown control. Optional features include negative or positive on/off logic and SMT connections. *Trademark of General Electric Corporation # UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards ‡ # The PMBus name and logo are registered trademarks of the System Management Interface Forum (SMIF) April 30, 2021 ©2014 General Electric Company. All Rights reserved. GE Datasheet SHHN000A3 Series; DC-DC Converter Power Modules 9Vdc – 36Vdc input; +15V, -15V Dual Output, 0.3A 9W Output Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings will cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not desired at these or any other conditions in excess of those given in the operations sections of the Datasheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit All VIN -0.3 40 Vdc Transient (1s) – No damage All VIN, trans -0.3 50 Vdc Operating Ambient Temperature All TA -40 85 °C Storage Temperature All Tstg -55 125 °C Altitude All 4000 m All 1600 \ Vdc Input Voltage (Continuous) (see Thermal Considerations section) I/O Isolation Voltage (100% factory Hi-Pot tested) ⎯ Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions . Parameter Device Symbol Min Typ Max Unit Operating Input Voltage All VIN 9 ⎯ Maximum Input Current All IIN VO1,02 = ON IIN,No load 30 mA Input Stand-by Current (VIN = 24Vdc, module disabled) All IIN,stand-by 9 mA Inrush Transient All I12t Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1μH source impedance; VIN =0 to 36V, IO1 &02= IOmax ; See Test Configurations) All 30 mAp-p Input Ripple Rejection (120Hz) All 40 dB 36 Vdc 1.3 Adc (VIN=9 to 36V, IO1=IO, max, , IO2=IO2 max, ) Input No Load Current (VIN = 24Vdc, IO = 0, module enabled) April 30, 2021 ©2014 General Electric Company. All Rights Reserved 0.05 A2s Page 2 GE Datasheet SHHN000A3 Series; DC-DC Converter Power Modules 9Vdc – 36Vdc input; +15V, -15V Dual Output, 0.3A 9W Output Electrical Specifications (continued) Parameter Output Voltage Set-point 1 (VIN=9 to 36Vdc, IO=IO, max, TA=25°C) Output Voltage Set-point 2 (VIN=9 to 36Vdc, IO=IO, max, TA=25°C) Device Symbol Min +15.0 VO1 VO1, set -15.0 VO2 All Typ Max Unit -1.5% +1.5% %V0 VO2, set -1.5% +1.5% %V0 VO1, 02 -3.0 ⎯ +3.0 % VO, set Output Voltage Accuracy (Over all operating input voltage, resistive load, and temperature conditions until end of life) Output Regulation Line (VIN=VIN, min to VIN, max) All ⎯ 0.05 0.3 % VO, set Load (IO=10% to IO, max) All ⎯ 0.05 0.3 % VO, set Temperature (Tref=TA, min to TA, max) All ⎯ ⎯ 1.0 Cross Regulation (10-100% Load on each output)** All 5 % VO, set % VO, set Output Ripple and Noise on nominal output Measured with 10uF Tantalum||1uF ceramic (VIN=24 Vdc, IO=100%IO, max, TA=25°C) RMS (5Hz to 20MHz bandwidth) Peak-to-Peak (5Hz to 20MHz bandwidth) All ⎯ 50 mVrms ⎯ 200 mVpk-pk External Capacitance All CO, max 0 ⎯ 470 μF Output Current -1 All Io1 0 ⎯ 0.3 Adc Output Current - 2 All Io2 0 ⎯ 0.3 Adc Output Current Limit Inception (Hiccup Mode) All IO, lim All IO, s/c All 0.6 Adc ⎯ 0.127 Arms η - 84 ⎯ % All fsw ⎯ 300 ⎯ kHz Peak Deviation All Vpk ⎯ 3.0 ⎯ % VO, set Settling Time (Vo