ATR2010

THICK FILM CHIP RESISTORS ■CONSTRUCTION Overcoating RuO2 Type Resistor 47E 563 ■DIMENSIONS ■OPERATING TEMPERATURE RANGE -55˚C ~ +155˚C Alumina substrate 2873 Electrode Plating(Ni+Sn) Unit: mm Type Dimensions ATR 0402 L 1.00 ± 0.10 1.55 ± 0.10 2.00 ± 0.10 3.05 ± 0.10 3.05 ± 0.10 5.00 ± 0.20 6.30 ± 0.20 W 0.50 ± 0.05 0.80 ± 0.10 0.05 H 0.30 ± 0.05 0.45 ± 0.10 0.50 ± 0.10 0.55 ± 0.10 0.05 L1 0.20 ± 0.10 0.30 ± 0.15 0.35 ± 0.20 0.45 ± 0.20 0.50 ± 0.20 0.60 ± 0.20 0.60 ± 0.20 L2 0.25 ± 0.10 0.30 ± 0.15 0.35 ± 0.15 0.35 ± 0.15 0.50 ± 0.20 0.60 ± 0.20 0.60 ± 0.20 2873 L W ATR 0603 ATR 0805 ATR 1206 1.25 ± 0.10 1.55 ± 0.10 2.55 ± 0.10 2.50 ± 0.20 3.20 ± 0.20 L1 L2 L1 H L2 ATR 1210 ATR 2010 ATR 2512 0.55 ± 0.10 0.55 ± 0.10 0.55 ± 0.10 ■General Specifications Type Rated Power at 70˚C 1 W 16 Max. Max. T.C.R. Working Overload (ppm/˚C) Voltage Voltage +500 - 200 Resistance Range D( ±0.5%) E-96 100Ω~990Ω 100Ω~1MΩ 10Ω~99Ω 100Ω~1MΩ 100Ω~1MΩ 100Ω~1MΩ F( ±1%) E-96 1Ω~9.9Ω 10Ω~990Ω 33Ω~1MΩ 10Ω~32Ω 1.1M~10MΩ 1Ω J( ±5%) E-24 1Ω~9.9Ω G( ±2%) E-24 1Ω~9.9Ω 10Ω~990Ω 10Ω~10MΩ 1Ω~9.9Ω 10Ω~10MΩ 1Ω~9.9Ω 10Ω~10MΩ 1Ω~9.9Ω 10Ω~10MΩ 1Ω~9.9Ω 10Ω~1MΩ 10Ω~1MΩ - Jumper Rated Current Jumper Resistance Value ATR 0402 50V 100V ± 200 ± 100 ± 200 ± 400 ± 100 1A 10Ω~990Ω 10Ω~10MΩ 1Ω~9.9Ω 11MΩ~26MΩ 50mΩMAX ATR 0603 1 W 10 50V 100V 1A 50mΩMAX 1Ω~9.9Ω 33Ω~1MΩ 10Ω~32Ω 1.1M~10M 10Ω~10MΩ 1Ω~9.9Ω 11MΩ~26MΩ ATR 0805 1 W 8 150V 300V ± 200 ± 400 ± 100 2A 50mΩMAX 1Ω~9.9Ω 33Ω~1MΩ 10Ω~32Ω 1.1M~10MΩ 10Ω~10MΩ 1Ω~9.9Ω 11MΩ~26MΩ ATR 1206 1 W 4 200V 400V ± 200 ± 400 ± 100 2A 50mΩMAX 1Ω~9.9Ω 33Ω~1MΩ 10Ω~32Ω 1.1M~10M 10Ω~20MΩ 1Ω~9.9Ω 10Ω~1MΩ 1Ω~9.9Ω 10Ω~1MΩ 1Ω~9.9Ω 2A 50mΩMAX 2A 50mΩMAX 2A 50mΩMAX ATR 1210 1 W 3 200V 400V ± 200 ± 400 ± 100 1Ω~9.9Ω 10Ω~1MΩ 10Ω~1MΩ - ATR 2010 3 W 4 200V 400V ± 200 ± 400 ± 100 ATR 2521 1W 200V 400V ± 200 ± 400 70 Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before your order and/or use. ■CHARACTERISTICS Item Temperature Cycling Low Temperature Operation Short Time Overload Resistance to Soldering Heat Loading Life in Moisture Resistance to dry heat Load Life Solderability Bending Strength Intermittent Overload Dielectric Withstanding Voltage Terminal Strength 0.5% • 1% (R 1Ω) 2% • 5% (R 1Ω) Test Method JIS-C5202-7.4 Cycle between -55˚C and +125˚C for 5 cycles MIL-R-55342-D 4.7.4 Followed by 45 Minutes of RCWV. JIS-C5202-5.5 Apply rated voltage 2.5 times for 5 seconds JIS-C5202-6.10 Immerse for 10 sec. in solder at 260 ± 5˚C JIS-C5202-7.9 40˚C, 1000Hrs at RCWV, 1.5Hr ON, 0.5Hr OFF JIS-C5202-7.2 96Hrs at 125˚C JIS-C5202-7.10 70˚C, 1000Hrs at RCWV, 1.5Hr ON, 0.5Hr OFF JIS-C5202-6.11 Immerse for 3 sec. in solder at 245 ± 3˚C JIS-C5202-6.1.4 Amount of band: ATR0402, ATR0603, ATR0805=5mm, ATR1206, ATR1210=3mm, ATR2010, ATR2521=2mm ± (0.5% + 0.05Ω) ± (0.5% + 0.05Ω) ± (1.0% + 0.05Ω) ± (1.0% + 0.05Ω) ± (1% + 0.05Ω) ± (1.0% + 0.05Ω) ± (1.0% + 0.05Ω) Coverage 95% ± (1.0% + 0.05Ω) ± (1.0% + 0.05Ω) ± (2.0% + 0.10Ω) ± (1.0% + 0.05Ω) ± (2.0% + 0.1Ω) ± (2.0% + 0.10Ω) ± (3.0% + 0.10Ω) Coverage 95% ± (1.0% + 0.05Ω) ± (5.0% + 0.10Ω) ± (1.0% + 0.05Ω) ± (5.0% + 0.10Ω) JIS-C5202-5.8 Apply rated voltage 1sec ON, 25sec OFF, 10000 cycles JIS-C5202-5.7 Apply 500VAC for 1min(ATR0402 300VAC, ATR0603 300VAC/1Min) JIS-C5202-6.1.4 Apply 5N pushing force for 10sec. No short or burned on the appearance No evidence of mechanical damage *RCWV=Rated Continuous Working Voltage ■CHARACTERISTIC DATA Load Life 1000Hr Short Time Overload Loading Life in Moisture 1000Hr 3.0 ∆R/R(%) ∆R/R(%) 1.0 ∆R/R(%) 3.0 1.0 0 10 100 1K 10K 100K 1M 0 -0.5 10 100 1K 10K 100K 1M 1.0 0 10 100 1K 10K 100K 1M Nominal Resistance(½) Nominal Resistance(½) Nominal Resistance(½) ■POWER DERATING CURVE 100 Rated Power(%) ■MARKING FOR E-24 & E-96 • 2%, 5% 3 digits indication first 2 digits are significant figures 3rd digit is multiplier(10 x ) EX. Marking -> 563 56 ×103 = 56000Ω = 56KΩ TYPE ATR0402: No marking Code • 1% 4 digits indication first 3 digits are significant figures 4th digit is multiplier(10 x ) EX. Marking -> 3922 392 ×102 = 39200Ω = 39.2KΩ 80 60 40 20 -55 20 40 60 70 80 100 125 Ambient Temp(ûC) 120 47E FOR ATR0603 1%(E-96) • 3 digit indication first 2 significant for E-96 Part marking scheme. 3rd digit is multiplier: Y = 10-2 X = 10-1 A = 100 B = 101 C = 102 D = 103 E = 104 F = 105 Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before your order and/or use. 71 CHIP RESISTORS 2.0 0.5 2.0 THICK FILM CHIP RESISTORS ■STANDARD RESISTANCE VALUES • For 2%, 5%(E-24) 10 16 27 43 68 11 18 30 47 75 12 20 33 51 82 13 22 36 56 91 15 24 39 62 • For 1%(E-96) 100 133 178 237 316 422 562 750 102 137 182 243 324 432 576 768 105 140 187 249 332 442 590 787 107 143 191 255 340 453 604 806 110 147 196 261 348 464 619 825 113 150 200 267 357 475 634 845 115 154 205 274 365 487 649 866 118 158 210 280 374 499 665 887 121 162 215 287 383 511 681 909 124 165 221 294 392 523 698 931 127 169 226 301 402 536 715 953 130 174 232 309 412 549 732 976 ■ALTERNATE MARKING METHOD • For ATR0603 1%(E-96) Code 1 2 3 4 5 6 7 8 9 10 11 12 R Value 100 102 105 107 110 113 115 118 121 124 127 130 Code 13 14 15 16 17 18 19 20 21 22 23 24 R Value 133 137 140 143 147 150 154 158 162 165 169 174 Code 25 26 27 28 29 30 31 32 33 34 35 36 R Value 178 182 187 191 196 200 205 210 215 221 226 232 Code 37 38 39 40 41 42 43 44 45 46 47 48 R Value 237 243 249 255 261 267 274 280 287 294 301 309 Code 49 50 51 52 53 54 55 56 57 58 59 60 R Value 316 324 332 340 348 357 365 374 383 392 402 412 Code 61 62 63 64 65 66 67 68 69 70 71 72 R Value 422 432 442 453 464 475 487 499 511 523 536 549 Code 73 74 75 76 77 78 79 80 81 82 83 84 R Value 562 576 590 604 619 634 649 665 681 698 715 732 Code 85 86 87 88 89 90 91 92 93 94 95 96 R Value 750 768 787 806 825 845 866 887 909 931 953 976 ■EXPLANATION OF PART NUMBERS (EX) ATR Type Thick Film Chip Resistors C: Sn/Pb Process T : Sn(Ti) Process 0402 Size 0402 0603 0805 1206 1210 2010 2512 101 Nominal Resistance ■Resistors • 3-Digit: E24 Series Ex 2.2Ω=2R2 100Ω=101 • 4-Digit: E96 Series Ex 10.2Ω=10R2 10KΩ=1002 ■Jumper: 000 J Tolerance D F G J =± =± =± =± 0.5% 1% 2% 5% TP Packing TH: 2mm Pitch Paper (Taping) 10000pcs TP: 4mm Pitch Paper (Taping) 5000pcs TE: 4mm Pitch Emboss (Taping) 4000pcs BA: Bulk Case 72 Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before your order and/or use.