ABLS7M2-14.7456MHZ-D2Y-T

SMD MICROPROCESSOR CRYSTAL ABLS7M2 Pb RoHS / RoHS II Compliant 7.0 x 4.1 x 2.0mm Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable FEATURES: • Reduced footprint from ABLS (standard HC/49US package) by 50% • Low profile: 2.0mm max. height • Suitable for RoHS compliant reflow • Tight stability & extended temperature options • High reliability & Cost effective • Resistance welded metal package APPLICATIONS: • Wireless Applications • Home electronics • Computers, modems, and communications • Microprocessors STANDARD SPECIFICATIONS: Parameters Frequency Range* Standard Frequencies Operation Mode Operating Temperature Storage Temperature Frequency Tolerance @+25°C Frequency Stability over the Operating Temperature ( ref. to +25°C) Minimum Typical 12.0 40.0 12.0, 12.288, 13.5, 13.56, 14.31818, 14.7456, 16.0, 18.432, 20.0, 20.5, 24.0, 24.576, 25.0, 26.0, 27.0 MHz MHz +70 +125 +50 ºC ºC ppm See options -50 +50 ppm See options Ω 12.000 ~ 16.000MHz 16.001 ~ 30.000MHz 30.001 ~ 40.000MHz 60 40 25 5 Load capacitance (CL) 18 Drive Level 50 -5 Drive level dependency (DLD) Notes 0 -40 -50 Shunt capacitance (C0) Insulation Resistance Units Fundamental (AT-cut) Equivalent series resistance (R1) @+25°C Aging Maximum See options pF pF 100 µW +5 ppm Standard (See options if other than STD) @25°C±3°C First year @ 100Vdc ± 15V 500 MΩ 10nw ~ 100uw，12 points Change in ESR (Maximum - Minimum) over DLD range < 30% ESR max. * Please contact Abracon for other frequencies. ABRACON IS ISO9001:2015 CE R TIFIED Revised:07.29.2021 Headquarters: 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 SMD MICROPROCESSOR CRYSTAL ABLS7M2 Pb RoHS / RoHS II Compliant 7.0 x 4.1 x 2.0mm PART IDENTIFICATIONS: (left blank if standard) ABLS7M2 - MHz - - - Packaging Blank: Bulk T: Tape & Reel Frequency in MHz Please specify the frequency in MHz. e.g. 12.000MHz 14.31818MHz Load Capacitance (pF) Please specify CL (Minimum 8pF) in pF or S for series Custom ESR if other than standard R□ □: Specify a value in Ω (e.g.: R40) Operating Temp. Blank: 0°C ~ +70°C A: -10°C ~ +60°C B: -20°C ~ +70°C C: -30°C ~ +70°C N: -30°C ~ +85°C D: -40°C ~ +85°C J: -40°C ~ +105°C K: -40°C ~ +125°C Freq. Stability (See Table 1 for details) Blank: ± 50 ppm U: ± 10 ppm G: ± 15 ppm X: ± 20 ppm W: ± 25 ppm Y: ± 30 ppm H: ± 35 ppm Q: ± 100 ppm Freq. Tolerance Blank: ± 50 ppm 1: ± 10 ppm 7: ± 15 ppm 2: ± 20 ppm 3: ± 25 ppm 4: ± 30 ppm Table 1 Available Combinations of Operating Temp. and Freq. Stability Operating Temp. Freq. Stability U:±10ppm G:±15ppm X:±20ppm W:±25ppm Y:±30ppm A: -10°C ~ +60°C √ Std.: 0°C ~ +70°C √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ N: -30°C ~ +85°C √ √ √ √ D: -40°C ~ +85°C √ √ B: -20°C ~ +70°C C: -30°C ~ +70°C J: -40°C ~ +105°C H:±35ppm Std.:±50ppm Q:±100ppm √ √ √ √ K: -40°C ~ +125°C √ Note: Please contact Abracon for other frequency stability and operating temperature range options. ABRACON IS ISO9001:2015 CE RTIFIED Revised:07.29.2021 Headquarters: 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 SMD MICROPROCESSOR CRYSTAL ABLS7M2 Pb RoHS / RoHS II Compliant 7.0 x 4.1 x 2.0mm OUTLINE DIMENSION: Actual Size Comparison ABLS7M2 ABLS 11.4 x 4.7 x 4.2 mm 7.0 x 4.1 x 2.0 mm Dimension: inches [mm] REFLOW PROFILE: ABRACON IS ISO9001:2015 CE R TIFIED Revised:07.29.2021 Headquarters: 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 SMD MICROPROCESSOR CRYSTAL ABLS7M2 Pb RoHS / RoHS II Compliant 7.0 x 4.1 x 2.0mm TAPE & REEL: T = tape and reel (3000pcs/reel) No. A C D T F G H No. J K L M N P Q R S Dimensions (mm) 100 ± 1.0 330 ± 2.0 16.4 ± 1.0 20.4 ± 0.5 13.0 ± 0.2 20.2 min. 1.5 min. Dimensions (mm) Ø1.5 4.0 ± 0.1 16.0 ± 0.3 7.5 ± 0.1 9.4 ± 0.1 2.5 ± 0.1 0.3 ± 0.05 8.0 ± 0.1 4.4 ± 0.1 Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2015 CE R TIFIED Revised:07.29.2021 Headquarters: 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858