ABM3C-30.000MHZ-D4Y-T

CERAMIC SMD CRYSTAL ABM3C RoHS /RoHS II Compliant 5.0 x 3.2 x 1.3mm ABM3C Series products with the Date Code/Traceability Code marking ending in “X” are Glass-Sealed and the following RoHS Exemption applies: Pb in Glass, exemption 7C-I per RoHS II Directive 2011/65/EU Annex ABM3C Series products with the Date Code/Traceability Code marking ending in “C” and “F” are Seam-Sealed and are Pb-Free. Moisture Sensitivity Level – MSL – N/A (The ABM3C Series is a Hermetically Sealed device and not moisture sensitive) FEATURES: • Low height; suitable for thin equipment. • New seam sealed package available (code “C”) • Tight tolerance and stability available. • Suitable for RoHS compliant reflow profile APPLICATIONS: • High density applications. • Modems, communication and test equipment. • PMCIA, Wireless applications STANDARD SPECIFICATIONS: Parameters Frequency Range Operation Mode Operating Temperature Storage Temperature Frequency Tolerance @+25°C Frequency Stability over the Operating Temperature ( ref. to +25°C) Minimum Typical Maximum Units Notes 50.000 MHz Fundamental -10 -40 -50 +70 +90 +50 ºC ºC ppm See options -50 +50 ppm See options Ω 10.000 – 15.999MHz 16.000 – 50.000MHz 10.000 Fundamental 60 50 7 Equivalent series resistance (R1) Shunt capacitance (C0) Load capacitance (CL) 18 Drive Level 10 Aging pF -5 Insulation Resistance pF 100 µW +5 ppm 500 MΩ See options Standard (See options if other than STD) @25°C±3°C First year @ 100Vdc ± 15V OPTIONS & PART IDENTIFICATION: (Left blank if standard) ABM3C - MHz - - - - Frequency in MHz Please specify the frequency in MHz. e.g. 14.31818MHz Packaging Blank: Bulk T: Tape & Reel Load Capacitance (pF) Please specify CL in pF or S for series Custom ESR if other than standard R□ □: Specify a value in Ω (e.g.: R40) Freq. Stability Y: ± 30 ppm H: ± 35 ppm A: ± 80 ppm Operating Temp. E: 0°C ~ +70°C B: -20°C ~ +70°C C: -30°C ~ +70°C N: -30°C ~ +85°C D: -40°C ~ +85°C Freq. Tolerance 2: ± 20 ppm 3: ± 25 ppm 4: ± 30 ppm 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 09-07-21 ABRACON IS ISO9001-2015 CERTIFIED CERAMIC SMD CRYSTAL ABM3C RoHS /RoHS II Compliant 5.0 x 3.2 x 1.3mm OUTLINE DRAWING: Sealing Method : Glass Sealing for parts with Traceability Code ending in “X” Seam Sealing for parts with Traceability Code ending in “C” and “F” Note: Due to material availability, the chamfer could be located on pin #1 or #2. Be advised that the chamfer location has no impact on the electrical performance of the device. Dimensions: inches (mm) TAPE & REEL: 1000pcs/reel Dimensions: mm 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 09-07-21 ABRACON IS ISO9001-2015 CERTIFIED CERAMIC SMD CRYSTAL ABM3C RoHS /RoHS II Compliant 5.0 x 3.2 x 1.3mm REFLOW PROFILE: Table 1 SnPb Eutectic Process Classification Temperatures (Tc) Package Thickness Volume mm3 350 2.5 mm 220 °C 220 °C Table 2 Pb-Free Process Classification Temperatures (Tc) Volume mm3 2000 2.5 mm 250 °C 245 °C 245 °C Profile Feature Sn-Pb Eutectic Assembly Pb-Free Assembly 100°C 150°C 60 - 120 sec. 3°C/sec. max 183°C 60 - 150 sec. see Table 1 20 sec. 6°C/sec. max 6 min. max 2 max 150°C 200°C 60 - 120 sec. 3°C/sec. max 217°C 60 - 150 sec. see Table 2 30 sec. 6°C/sec. max 8 min. max 2 max Preheat / soak Temperature minimum (Tsmin) Temperature maximum (Tsmax) Time (Tsmin to Tsmax) (ts) Average ramp-up rate (Tsmax to TP) Liquidous temperature (TL) Time at liquidous (tL) Peak package body temperature (TP)* Time (tp)** within 5°C of the specified classification temperature (TC) Ramp-down rate (Tp to Tsmax) Time 25°C to peak temperature Reflow cycles *Tolerance for peak profile temperature (T P) is defined as a supplier minimum and a user maximum. **Tolerance for time at peak profile temperature (tp) is defined as supplier minimum and a user maximum. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 09-07-21 ABRACON IS ISO9001-2015 CERTIFIED