ABM7-13.52127MHZ-10-R50-J4Q-T

CERAMIC SMD MICRO MINIATURE MICROPROCESSOR CRYSTAL ABM7 Pb in Glass (exempt per RoHS 2002/95/EC Annex (5)) RoHS/RoHS II Compliant 6.0 x 3.5 x 1.4mm | | | | | | | | | | | | | Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable APPLICATIONS: FEATURES: • Computers, Modems, Communication equipment • Thin equipment • Industrial wide temperature applications • Low in height (1.4 mm max.) • Ceramic package assures high reliability • Small size SMD, suitable for high density applications • Superior heat-resistant glass sealing • Wide operating temperature available STANDARD SPECIFICATIONS: Parameters Minimum Maximum Units 8.000 48.000 MHz Operating Temperature -10 +60 ºC Storage Temperature -55 +125 ºC Frequency Tolerance @ +25°C Frequency Stability over the Operating Temperature (ref. to +25°C) Equivalent series resistance -50 +50 ppm See options -50 +50 ppm See options Frequency Range Typical See table 1 below Shunt capacitance (C0) Load capacitance (CL) 18 Drive Level 10 Aging@25°C±3°C Insulation Resistance Table 1 Frequency (MHz) 8.000 – 9.999 10.000 – 11.999 12.000 – 15.999 16.000 – 48.000 Notes Fundamental AT-cut See options Ω 7 pF 100 µW ±5 ppm First year MΩ @ 100Vdc pF 500 See options ESR(Ω) max. 100 80 60 50 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 09-03-19 ISO9001-2015 CERTIFIED | | CERAMIC SMD MICRO MINIATURE MICROPROCESSOR CRYSTAL ABM7 Pb in Glass (exempt per RoHS 2002/95/EC Annex (5)) RoHS/RoHS II Compliant 6.0 x 3.5 x 1.4mm | | | | | | | | | | | | | OPTIONS AND PART IDENTIFICATION: (left blank if standard) ABM7- MHz - - - - - - Frequency in MHz e.g. 14.31818MHz 26.000MHz Packaging Blank: Bulk T: 1kpcs/reel T2: 250pcs/reel Load Capacitance (pF) Please specify CL in pF or S for series (8 to 33pF) Please contact ABRACON for other values Custom ESR if other than standard R□ □: Specify a value in Ω (e.g.: R40) Operating Temp. Freq. Tolerance E: 0°C ~ +70°C 1: ± 10 ppm B: -20°C ~ +70°C 7: ± 15 ppm C: -30°C ~ +70°C 2: ± 20 ppm N: -30°C ~ +85°C 3: ± 25 ppm D: -40°C ~ +85°C 4: ± 30 ppm J (***): -40°C ~ +105°C (***) ±100 ppm only Please check with Abracon for availability for non-standard frequencies with these operating temperature options. Freq. Stability U: ± 10 ppm (*) G: ± 15 ppm (**) X: ± 20 ppm W: ± 25 ppm Y: ± 30 ppm H: ± 35 ppm Q: ± 100 ppm (*) -10°C to 60°C only. (**) Contact ABRACON for availability for -40°C to +85°C OUTLINE DIMENSION: Dimensions: inches (mm) Note: Due to the availability of raw materials, this part may be manufactured with the chamfer on pin 1. Be advised that this does not affect the electrical characteristics of the crystal in any way. 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 09-03-19 ISO9001-2015 CERTIFIED | | RE CERAMIC SMD MICRO MINIATURE MICROPROCESSOR CRYSTAL ABM7 Pb in Glass (exempt per RoHS 2002/95/EC Annex (5)) RoHS/RoHS II Compliant 6.0 x 3.5 x 1.4mm | | | | | | | | | | | | | REFLOW PROFILE: TAPE & REEL: Packaging: T: 1000pcs/reel T2: 250pcs/reel Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 09-03-19 ISO9001-2015 CERTIFIED | |