ABSM3B

MICROPROCESSOR CRYSTALS AT 49 CASE GROUNDED (- G), SURFACE MOUNT ABSM 3 Series FEATURES: • • • • 13.0 x 4.3 x 6.2 mm Excellent all-purpose surface-mount crystal. Two different pin connections. Four pad land pattern compatible with common plastic molded designs. Case ground on AG series. APPLICATIONS: • Modems, Communications, High-density equipment • Low EMI applications, Noise veductions. STANDARD SPECIFICATIONS Frequency RRange 3.5 MHz - 25 MHz 60MHz Frequency ange 3.579MHz STA Mode Operation Mode ARD SPECIFICATT ONS Fundamental, AI OperationND 3.579MHz - 28MHz (Fundamental) Operating Temperature -10°C to + 0° C (See 3rd overtone) 28.01MHz -660MHz (Options) Storage Temperature -55°C to + 1 Frequency up to 50MHz) (Fundamental 25° C Frequency Tolerance @ 25°C ± 50 ppmto ax. (See(See Options) Operating Temperature -10°C m+60°C Options) Frequency emperaturver Temp. Stability o e ± 50 p-pm max. (See+85°C Storage T 40°Cto Options) Equivalent STolerance @ 25°C eries Resistance 200 ±5 0 ppm max. (See < 4.0 MHz W for 3.5 MHz < F Options) Frequency (ESR) Maximum 150 W for 4.0 MHz < F < 6.0 MHz Frequency Stability over Temp. ±100ppm max. (See Options) 100 W for 6.0 MHz < F < 10.0 MHz Equivalent Series Resistance 180 80 max. for 0 .579MHz < 14.04MHz W W for 1 3 MHz < F < F < .000MHz (ESR) Fundamental 150 50 max. for 4 .000MHz < F 5 M.000MHz W W for 1 4 MHz < F _ 2 < 5 Hz 100 7 p F max. 5.000MHz < F < 7.000MHz W max. for Shunt Capacitance C0 Load Capacitance CL 50 16 max. forO7.000MHz < F < 15.00MHz W p F (See ption) Drive Level 40 100 µW max. 5.00MHz < F < 50.00MHz W max. for 1 Aging @ 25° C First Year ± 5 pp mfor ax. 3rd Overtone 100 W max. m 28.0MHz < F < 60.00MHz Insulationapacitance C Resistance 500 M W min. 7pF 00ax. ± 15V at 1 m Vdc Shunt C 0 Load Capacitance CL 18pF (See Options) Drive Level 1mW max., 100µW correlation Aging @ 25°C per Year ±5ppm max. Insulation Resistance 500MW min. at 100Vdc ±15V Environmental, and mechanical specifications see appendix C, Group 1. Marking, see appendix G. Tape and Reel, see appendix H.(1,000 pcs / reel). Reflow profile, see appendix E. Recommended handling, see appendix F. Application notes, see appendix A. PIN CONNECTIONS Dimensions: Inches (mm) Part Number H (max.) ABSM3A ABSM32A ABSM33A ABSM3B ABSM32B ABSM33B ABSM3AG ABSM32AG 0.20 (5.1) 0.18 (4.5) 0.15 (3.8) 0.20 (5.1) 0.18 (4.5) 0.15 (3.8) 0.20 (5.1) 0.18 (4.5) ORDERING OPTIONS ABSM3XXX - Frequency - CL - ESR Blank 2, 3 Blank or G XX.XXXX MHz Load cap.in pF or -S for Series ABRACON IS ISO 9001 / QS 9000 CERTIFIED - Temperature -1 -7 -2 -3 -4 - Tolerance -U -G -X -W -Y -H -Z Stability for ± 10ppm for ± 15ppm for ± 20ppm for ± 25ppm for ± 30ppm for ± 35ppm for ± 50ppm - Mode - Packaging -T (Tape & Reel) RXXX (value in W) -E for 0°C to + 70°C -B for -20°C to + 70°C -C for -30°C to + 70°C -N for -30°C to + 85°C -D for -40°C to + 85°C A or B for ± 10ppm for ± 15ppm for ± 20ppm for ± 25ppm for ± 30ppm -F (Fundamental AT > 28MHz) -FB (Fundamental BT > 28MHz)* * +100ppm @ -10 C to +60 C. o o NOTE: Left blank if standard • All specifications and markings subject to change without notice ABRACON 29 J ourney • A liso V iejo, C A 9 2656 • U SA (949) 4 48-7070 • F AX : ( 949) 448-8484 E-MAIL: abinfo@ abracon.com • INTERNET ADDRESS: ww w. abracon.com ® C O R P O R AT I O N 23