ACR2005I4

433 / 450~470 MHz Chip Antenna ACR2005I4 Request Samples 20.1 x 5.0 x 1.6 mm RoHS/RoHS II Compliant MSL Level = N/A Applications Features • • • • • • • Check Inventory 433 MHz - Monopole Chip Antenna Design Can be matched for 450~470 MHz Band Low Profile Peak Gain of 0.3 dBi (433 MHz) Omni-directional pattern Linear Polarization Surface mount device • • • • • • • LPWA - LoRA/ SigFox/ ISM IoT o Industrial o Infrastructure M2M Smart City Medical devices Home and Vehicle Automation TPMS (Tire Pressure Monitoring Systems) Product Image Unit : mm 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 07-19-21 ABRACON IS ISO9001-2015 CERTIFIED 433 / 450~470 MHz Chip Antenna ACR2005I4 Request Samples Check Inventory 20.1 x 5.0 x 1.6 mm RoHS/RoHS II Compliant MSL Level = N/A Electrical Specification Parameter Operating Frequency Impedance Return Loss Efficiency Peak Gain Average Gain Polarization Azimuth Pattern Specification 433 MHz 433 -23.26 33.2 0.3 -4.7 Unit 450 ~ 470 MHz 450 470 50 -7.98 33.9 -0.3 -4.6 Linear Omni-directional MHz Ω dB % 29.5 -0.4 -5.3 dBi Mechanical Specification Parameter Specification Antenna Dimension Mounting Type 20.1 x 5.0 x 1.6 mm Surface Mount Environmental Specification Parameter Specification Operating Temperature Storage Temperature Relative Humidity RoHS Compliance Pb-Free -40oC to +85oC 0oC to +40oC 20% ~ 80% Yes Yes 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 07-19-21 ABRACON IS ISO9001-2015 CERTIFIED 433 / 450~470 MHz Chip Antenna ACR2005I4 Request Samples Check Inventory Evaluation Board Dimensions 20.1 x 5.0 x 1.6 mm RoHS/RoHS II Compliant MSL Level = N/A Unit : mm 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 07-19-21 ABRACON IS ISO9001-2015 CERTIFIED 433 / 450~470 MHz Chip Antenna ACR2005I4 Request Samples Check Inventory Evaluation Board with Matching Circuit Component L1 L2 C1 433 MHz Specification 68 nH 1.8 nH 8.2 pF 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com 20.1 x 5.0 x 1.6 mm RoHS/RoHS II Compliant MSL Level = N/A 450 ~ 490 MHz 47 nH 2.7 nH 6.8 nH REVISED: 07-19-21 ABRACON IS ISO9001-2015 CERTIFIED 433 / 450~470 MHz Chip Antenna ACR2005I4 Request Samples Check Inventory 20.1 x 5.0 x 1.6 mm RoHS/RoHS II Compliant MSL Level = N/A Reflection Characteristics – Return Loss 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 07-19-21 ABRACON IS ISO9001-2015 CERTIFIED 433 / 450~470 MHz Chip Antenna ACR2005I4 Request Samples Check Inventory Radiation Characteristics – 2D Pattern 20.1 x 5.0 x 1.6 mm RoHS/RoHS II Compliant MSL Level = N/A 433 MHz XY - Plane XZ – Plane YZ - Plane 450 ~ 470 MHz XY - Plane XZ – Plane 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com YZ - Plane REVISED: 07-19-21 ABRACON IS ISO9001-2015 CERTIFIED 433 / 450~470 MHz Chip Antenna ACR2005I4 Request Samples Check Inventory Radiation Characteristics – 3D Pattern 20.1 x 5.0 x 1.6 mm RoHS/RoHS II Compliant MSL Level = N/A 433 MHz 450 ~ 470 MHz 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 07-19-21 ABRACON IS ISO9001-2015 CERTIFIED 433 / 450~470 MHz Chip Antenna ACR2005I4 Request Samples Check Inventory 20.1 x 5.0 x 1.6 mm RoHS/RoHS II Compliant MSL Level = N/A Reliability Test Report Test Condition Low Temperature test High-temperature test Test Exposure and Duration Expose the specimen to -40°C for 16 hours and then to normal temperature/ humidity for 24 hours or more. After this test, examine its appearance and functions. Expose the specimen to +85°C for 16 hours and then to normal temperature / humidity for 24 hours or more. After this test, examine its appearance and functions. Hightemperature/highhumidity test Subject the object to the environmental conditions of +85°C and 90-95% relative humidity for 96 hours, then expose it to normal temperature/humidity for 24 hours or more. After this test, examine its appearance and functions. Thermal shock test Subject the object to cyclic temperature change (-40°C for 30 minutes, then +85°C for 30 minutes) for 5 cycles, then expose to normal temperature/humidity for 24 hours or more. Sinusoidal vibration test Subject the object to vibrations of 5 to 200 to 5Hz swept in 10 minutes, 4.5G at maximum (2 mm amplitude), in X and Y directions for two hours each and in Z direction for four hours. After this test, examine its appearance functions. Vibration test in packaged condition Subject the object, which is packaged as illustrated, to vibrations of 15-60-15Hz swept in 6 minutes, 4G at maximum (2mm amplitude at maximum), applied in X, Y and Z directions for two hours each, i.e. six hours in total. After this test, examine its appearance and functions. Free fall test in packaged condition Soldering heat resistance test Adhesion test Drop the object, which is packaged as illustrated, to a concrete surface from the height of 90 cm, on one comer, three edges and six faces once each, i.e. 10 times in total. After this test, examine its appearance and functions. After the lead pins of the unit are soaked in solder bath at 270±5 °C for 10±0.5 seconds and then be left for more than 1 hr at 25±5 °C. After this test, examine its appearance and functions. The device is subjected to be soldered on test PCB. Then apply 0.5 Kg (5 N) of force for 10±1 second in the direction of parallel to the substrate (the soldering should be done by reflow and be conducted with care so that the soldering is uniform and free of defect by stress such as heat shock). 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 07-19-21 ABRACON IS ISO9001-2015 CERTIFIED 433 / 450~470 MHz Chip Antenna ACR2005I4 Request Samples Check Inventory Reflow Profile 20.1 x 5.0 x 1.6 mm RoHS/RoHS II Compliant MSL Level = N/A The chip antenna can be assembled using the following Pb-free assembly. According to the standard IPC/JEDEC JSTD-020C, the temperature profile suggested is as follows : Zone Description 1 Preheat 2 Ramp-Up 3 Reflow Peak heat Ramp-Down Time from 25°C to Peak Temperature Composition of solder paste Solder Paste Model Temperature Times TSMIN ~ TSMAX 60 ~ 120 sec 150°C ~ 200°C TSMAX ~ TP : 3 °C/s TL 30 ~ 100 sec 217°C TP 5 sec (max) 260°C 6 °C/s 8 minutes (max) 96.5Sn/3Ag/0.5Cu SHENMAO PF606-P26 Soldering with Iron • • • Soldering Iron Temperature : 270±10 ℃ Apply pre-heating at 120 ℃ for 2~3 min. Complete soldering for each terminal within 3 s . o If the soldering iron temperature exceeds 270±10 ℃ or 3 seconds, it can damage the component. Note: All temperature measure points are on top surface of the component. If temperature goes over the recommend, it will cause surface peeling or damage to the component. 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 07-19-21 ABRACON IS ISO9001-2015 CERTIFIED 433 / 450~470 MHz Chip Antenna ACR2005I4 Request Samples Check Inventory Precautions • • 20.1 x 5.0 x 1.6 mm RoHS/RoHS II Compliant MSL Level = N/A Do not direct solder onto the Sn electrode of the antenna pattern. Do not use the chip antenna in a corrosive gaseous atmosphere for example sulfur gas, chlorine gas. Packaging Packaging type : Tape & Reel (Blister tape to IEC 286-3, Polyester) Number of pieces per tape : 4000 Unit : mm ATTENTION: Abracon LLC’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information. 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 07-19-21 ABRACON IS ISO9001-2015 CERTIFIED