ADFC18-2450.00-A-T

SMD 2.45GHz Dielectric Band Pass Filter ADFC18-2450.00-A-T Pb RoHS Compliant 1.6 x 0.8 x 0.60 mm | | | | | | | | | | | | | | | APPLICATIONS: FEATURES: • Mobile communication system • Bluetooth, Wireless LAN, WIFI, GPS, etc. • Small and low profile enables high density mounting • Low insertion loss & attenuation • Internally shielded for enhanced performance • Excellent solderability STANDARD SPECIFICATIONS: Parameters Minimum Center Frequency (f0) Passband width Typical Maximum Units Notes 2500.00 1.6 1.8 MHz MHz dB dB @+25˚C @ -40 ~ +85˚C 0.5 dB 2450.00 2400.00 Insertion Loss (2400 ~ 2500MHz) Amplitude Ripple (2400 ~ 2500MHz) V.S.W.R (2400 ~ 2500MHz) 1.5 24 20 25 25 Relative Attenuation (Reference level: 0dB) Characteristic Impedance Operation Temperature Range Storage Temperature Range dB 50 -40 -10 +85 +40 CHARACTERISTIC CURVE: Ω °C °C 800 ~ 960MHz 1710 ~ 1990MHz 4800 ~ 5000MHz 7200 ~ 7500MHz RH 70% Max REFLOW PROFILE: 0 dB(S(2,1)) dB(S(1,1)) -10 -20 -30 -40 -50 -60 0 1 2 3 4 freq, GHz ABRACON IS 9001:2008 ISOISO 9001 / QS 9000 CE RTIFIED 5 6 7 8 △ △ △ △ △ △ Preheat condition: 150 ~200oC/60~120sec. Allowed time above 217 oC: 60~90sec. Max temp: 260 oC Max time at max temp: 10sec. Solder paste: Sn/3.0Ag/0.5Cu Allowed Reflow time: 2x max Revised: 12.03.12 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com SMD 2.45GHz Dielectric Band Pass Filter ADFC18-2450.00-A-T Pb RoHS Compliant 1.6 x 0.8 x 0.60 mm | | | | | | | | | | | | | | | OUTLINE DRAWING: Recommended Land Pattern Dimensions: mm TAPE & REEL: Packaging: 4,000pcs/reel A B P T max 1.00±0.10 1.80±0.10 4.0±0.10 0.75 Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS 9001:2008 ISOISO 9001 / QS 9000 CE RTIFIED Revised: 12.03.12 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com