AIML-1206 Series
Multilayer Ferrite Chip Inductor
Date of Issue: April 23th, 2013
3.2 x 1.6 x 1.1 mm
Page (1) of (10)
Abracon Drawing # 600224
Application
√ Non-safety
Safety
Revision #: B
Source Control Drawing
Part Description:
Customer Part Number:
Abracon Part Number:
Multilayer Ceramic Chip Inductor
AIML-1206 series
Customer Approval
(Please return this copy as a certification of your approval)
Approved by:
Approval Date:
PROPRIETARY NOTICE
These documents, and the contained information
herein, are proprietary and are not to be reproduced,
used or disclosed to others for manufacture or for
any other purpose, except as specifically authorized,
in writing, by ABRACON Corporation.
Abracon Corporation Headquarters:
30332 Esperanza
Rancho Santa Margarita, CA-92688
Ph: (949) 546-8000
Fax: (949) 546-8001
Internal Use Only
500320
Revision History
Revision
ECO
A
M171
B
M661
Description
Initital Release
Add RoHS Compliance
Revised format, electrical spec, dimension. Added
MSL, materials, reliability tests and T&R drawing.
Changed code to 500320.
Date
Prep’d
By
Ck’d
By
Ck’d
By
3/5/1999
7/14/2005
4/23/2013
Appr’d
By
TC
TC
JY
SR
CB
JE
AIML-1206 Series
Multilayer Ferrite Chip Inductor
1.0
Application
√ Non-safety
Safety
Date of Issue: April 23th, 2013
3.2 x 1.6 x 1.1 mm
Page (2) of (10)
Abracon Drawing # 600224
Revision #: B
Key Electrical Specifications
Part No.
AIML-1206Inductance Code
AIML-1206-R047
AIML-1206-R056
AIML-1206-R068
AIML-1206-R082
AIML-1206-R10
AIML-1206-R12
AIML-1206-R15
AIML-1206-R18
AIML-1206-R22
AIML-1206-R27
AIML-1206-R33
AIML-1206-R39
AIML-1206-R47
AIML-1206-R56
AIML-1206-R68
AIML-1206-R82
AIML-1206-1R0
AIML-1206-1R2
AIML-1206-1R5
AIML-1206-1R8
AIML-1206-2R2
AIML-1206-2R7
AIML-1206-3R3
AIML-1206-3R9
AIML-1206-4R7
AIML-1206-5R6
AIML-1206-6R8
AIML-1206-8R2
AIML-1206-100
AIML-1206-120
AIML-1206-150
AIML-1206-180
AIML-1206-220
AIML-1206-270
L(µH)
0.047
0.056
0.068
0.082
0.100
0.120
0.150
0.180
0.220
0.270
0.330
0.390
0.470
0.560
0.680
0.820
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10.0
12.0
15.0
18.0
22.0
27.0
Tolerance
(%)
J, K, M
J, K, M
J, K, M
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
Q
(min)
30
30
30
30
30
30
30
30
30
30
35
35
35
35
35
35
50
50
50
50
50
50
50
50
50
55
55
55
55
55
40
40
40
40
Test Freq.
SRF(MHz)
DCR(Ω)
Ir(mA)
(MHz)
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
4
4
4
2
2
1
1
1
1
(min)
400
380
330
310
280
260
240
220
200
180
170
160
140
130
120
110
90
80
70
66
58
53
49
48
41
38
34
31
28
26
23
21
19
17
(max)
0.15
0.15
0.25
0.25
0.25
0.25
0.25
0.30
0.35
0.40
0.40
0.45
0.50
0.55
0.65
0.75
0.40
0.40
0.45
0.50
0.55
0.55
0.60
0.70
0.70
0.75
0.75
0.80
0.80
0.90
0.80
0.80
0.90
0.90
(max)
300
300
300
300
250
250
250
250
250
250
250
200
200
150
150
150
100
100
50
50
50
50
50
50
50
25
25
25
25
15
5
5
5
5
AIML-1206 Series
Multilayer Ferrite Chip Inductor
1.0
Application
√ Non-safety
Safety
Date of Issue: April 23th, 2013
3.2 x 1.6 x 1.1 mm
Page (3) of (10)
Abracon Drawing # 600224
Revision #: B
Key Electrical Specifications
Part No.
AIML-1206Inductance Code
AIML-1206-330
AIML-1206-390
AIML-1206-470
AIML-1206-560
AIML-1206-680
AIML-1206-820
AIML-1206-101
AIML-1206-121
AIML-1206-151
AIML-1206-181
AIML-1206-221
1.1
L(µH)
33.0
39.0
47.0
56.0
68.0
82.0
100
120
150
180
220
Tolerance
(%)
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
J, K
Q
(min)
40
40
40
40
40
40
30
30
30
30
30
Test Freq.
SRF(MHz)
DCR(Ω)
Ir(mA)
(MHz)
1
1
1
1
1
1
1
1
1
1
1
(min)
16
12.5
11.5
10.5
10.5
10.0
9.0
7.0
6.5
6.0
5.5
(max)
1.05
2.00
2.00
2.50
2.50
3.00
3.00
3.50
3.80
4.00
4.00
(max)
5
5
5
4
4
4
4
2
2
2
2
Test Conditions and equipments
Q: HP4291 Impedance Analyzer, 50mV
DCR: HP4263A LCR meter
SRF: HP4291 Impedance analyzer
Ir: HP4291 Impedance Analyzer, DC power HP6632 and Adapter HP16200. ∆L/L (initial) ≥ -5%
Unless otherwise specified
Temperature : Ordinary Temperature ( 5 to 35oC)
Humidity : Ordinary Humidity (25 to 85% RH)
1.2
Operating Temperature: -55 oC ~ +125 oC
1.3
Storage Temperature: -55 oC ~ +125 oC
2.0
AIML-1206 Series is RoHS Compliant and Pb free
3.0
MSL level: 1
4.0
Part Number Identification
AIML-1206Inductance Code
Please refer to the
table above
Tolerance
J: ±5%
K: ±10%
M: ±20%
Packaging
T: Tape and Reel
(3kpcs / reel)
AIML-1206 Series
Multilayer Ferrite Chip Inductor
5.0
Application
√ Non-safety
Safety
Date of Issue: April 23th, 2013
3.2 x 1.6 x 1.1 mm
Page (4) of (10)
Abracon Drawing # 600224
Revision #: B
Mechanical Dimensions
L
Series
AIML-1206
W
T
a1,a2
3.20±0.20
1.60±0.20
[0.126±0.008]
[0.063±0.008]
1.10±0.30
[0.043±0.012]
0.50±0.30
[0.02±0.012]
Dimension: mm [inch]
5.1
Materials
1
2
3
4
Part Name
Base Material
Internal Conductor
Terminal Electrode
Terminal Electrode
Material
Ferrite (Ni-Cu-Zn series)
Ag
Ag
Ni-Sn
AIML-1206 Series
Multilayer Ferrite Chip Inductor
Date of Issue: April 23th, 2013
3.2 x 1.6 x 1.1 mm
Page (5) of (10)
Abracon Drawing # 600224
6.0
Application
√ Non-safety
Safety
Revision #: B
Reliability Tests Conditions
No.
1
2
Test Items
Specifications
Test Methods
Solderability
More than 90% of
termination should
be covered with
new solder
Solder: Sn
Temperature: 255oC+5 oC /-0 oC
Flux: rosin
Duration: 3.5±0.5s
Leaching Resistance
More than 75% of
termination Should
be covered with
new solder.
Solder: Sn
Temperature: 270 oC +2 oC /-0 oC
Flux: rosin
Duration: 10±0.5s
When the board curve to 2mm (0.079 inches) A = 1.0mm
3
Bending Strength
No mechanical
damage should be
noticed
Applied specified pull strength in axial direction. A=1.4mm, P=9.8N
4
Body Strength
No mechanical
damage should be
noticed
Applied specified pull strength in axial.
Pull strength is 10N, Time is 5±1 s
5
Terminal Strength
The terminal and
body should be no
damage
AIML-1206 Series
Multilayer Ferrite Chip Inductor
Date of Issue: April 23th, 2013
3.2 x 1.6 x 1.1 mm
Page (6) of (10)
Abracon Drawing # 600224
Application
√ Non-safety
Safety
Revision #: B
Reliability Tests Conditions (Con’d)
5.0
No.
6
Test Items
Specifications
Drop
7
Vibration
8
Humidity resistance
Drop 10 times on a concrete floor from a height of 1m.
Frequency: 10 to 55Hz
Amplitude: 1.52mm
Direction and time:
X, Y and Z directions for 2 hours each.
a. Test condition
Temp. : 60±2℃
Humidity: 90%~95%
Test time: 1000 h
b. Measurement method:
The component should be stabilized at normal condition for 24 hours
before test.
1.No mechanical
damage shall be noticed
9
10
High temperature
resistance
Low temperature
resistance
Test Methods
2. Inductance shall be
within:
a. Test condition
Applied rated current
Temp. : 125±2℃
Test time: 1000 h
0.001μH ~ 10μH: ±10%
10μH ~ 220μH: ±20%
b. Measurement method:
The component should be stabilized at normal condition for 24 hours
before test.
3. Q factor shall be
within:
±30%
a. Test condition
Temp. : -55±2℃
Test time: 1000 h
b. Measurement method:
The component should be stabilized at normal condition for 24 hours
before test.
a. Test condition
1) Temp. : -55℃, time: 30±3min
2) Temp. : +125℃, time: 30±3min
100 cycles
11
Thermal shock
b. Measurement method:
The component should be stabilized at normal condition for 24 hours
before test.
AIML-1206 Series
Multilayer Ferrite Chip Inductor
5.1
Date of Issue: April 23th, 2013
3.2 x 1.6 x 1.1 mm
Page (7) of (10)
Abracon Drawing # 600224
Reflow Profile
Application
√ Non-safety
Safety
Revision #: B
AIML-1206 Series
Multilayer Ferrite Chip Inductor
Application
√ Non-safety
Safety
Date of Issue: April 23th, 2013
3.2 x 1.6 x 1.1 mm
Page (8) of (10)
Abracon Drawing # 600224
6.0
Revision #: B
Packing
T: 3,000pcs / reel
Codes
A
B
C
D
E
F
G
H
ΦJ
t(max)
AIML-1206
2.0±0.2
3.6±0.2
8.0±0.3
3.5±0.05
1.75±0.1
4.0±0.1
2.0±0.05
4.0±0.1
1.5+0.1/-0
2.0±0.05
A
B
C
D
E
W
t
R
178±2
60±2
13.0±0.5
21.0±0.8
2.0±0.5
10.0±1.15
1.2±0.2
1.0±0.25
Dimension: mm
AIML-1206 Series
Multilayer Ferrite Chip Inductor
Date of Issue: April 23th, 2013
3.2 x 1.6 x 1.1 mm
Page (9) of (10)
Abracon Drawing # 600224
7.0
Application
√ Non-safety
Safety
Revision #: B
Notes
i)
The parts are manufactured in accordance with this specification. If other conditions and specifications which are required for this
specification, please contact ABRACON for more information.
ii)
ABRACON will supply the parts in accordance with this specification unless we receive a written request to modify prior to an order
placement.
iii) In no case shall ABRACON be liable for any product failure from in appropriate handling or operation of the item beyond the scope of this
specification.
iv) When changing your production process, please notify ABRACON immediately.
v)
ABRACON Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where
designated, Automotive Applications. ABRACON’s products are not
specifically designed for Military, Aviation, Aerospace, Lifedependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or
property.
For applications requiring high reliability and/or presenting an extreme operating environment, written
consent and
authorization from ABRACON Corporation is required. Please contact ABRACON Corporation for more information.
vi) All specifications and Marking will be subject to change without notice.
8.0
ABRACON CORPORATION – TERMS & CONDITIONS OF SALE
PLEASE NOTE: Claims for pricing errors, shortages and defective products must be reported within 10 days from receipt of goods. Returned
products will not be accepted after 30 days from the invoice date, and may be subject to restocking fees in accordance with Abracon Corporation’s
return policy. Abracon standard product purchase orders may not be canceled within 60 days of original shipping date. Abracon non-standard
product purchase orders are non-cancelable and non-returnable. All schedule changes must be requested prior to 30 days of original shipping date.
Maximum schedule change “push-out” shall be no more than 30 days from original shipping date. Abracon reserves the right to review all schedule
and quantity changes and make pricing changes as needed. NO CREDIT WILL BE GIVEN FOR PRODUCTS RETURNED WITHOUT PRIOR
AUTHORIZATION.
Please also note that IN NO EVENT SHALL ABRACON’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES ARISING
OUT OF ANY CAUSE (INCLUDING, BUT NOT LIMITED TO, CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER TORT)
EXCEED THE PURCHASE COST OF THE PRODUCTS. IN NO EVENT SHALL ABRACON BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL OR PUNITIVE DAMAGES.
Placing an order with ABRACON constitutes an acknowledgement that you have read and agree to the “Terms and Conditions of Sale.”
1. Prices: ABRACON (AB) reserves the right to increase the price of products by written notice to the Buyer at least thirty days prior to the date of
shipment of the products. When quantity price discounts are quoted by AB, the discounts are computed separately for each type of product to be
sold and are based upon the quantity of each type and each size ordered at any one time. If any order is reduced or cancelled by the Buyer with
AB’s consent, the prices shall be adjusted to the higher prices, if applicable, for the uncancelled quantity. Unless otherwise agreed, AB reserves the
right to ship and bill ten percent more or less than the exact quantity specified.
2. Taxes: Unless otherwise specified in the quotation, the prices shown do not include any taxes, import, or export duties, tariffs, or customs
charges. The Buyer agrees to pay AB the amount of any federal, state, county, municipal, or other taxes, duties, tariffs, or custom charges levied by
any jurisdiction, foreign or domestic, which AB is required to pay on account of the ownership at the place of installation or during transit of the
material or equipment which is the subject of this contract, or an account of the transportation, sale, or use of the material or equipment.
3. Payment Terms: Unless otherwise stated in a separate agreement or in AB’s quotation, payment terms are thirty days net from the date of
invoice, subject to approval from AB of amount and terms of credit. AB reserves the right to require payment in advance or C.O.D. and otherwise
modified credit terms. When partial shipments are made, payments therefore shall become due in accordance with the above terms upon submission
of invoices. If, at the request of the Buyer, shipment is postponed for more than thirty days, payment will become due thirty days after notice to the
Buyer that products are ready for shipment. These terms apply to partial as well as complete shipments on the debt at the lesser of 18% per year, or
the maximum then permitted by California law, from the due date until the Buyer pays the debt in full.
AIML-1206 Series
Multilayer Ferrite Chip Inductor
Date of Issue: April 23th, 2013
3.2 x 1.6 x 1.1 mm
Page (10) of (10)
Abracon Drawing # 600224
Application
√ Non-safety
Safety
Revision #: B
4. Shipment: All shipments will be made F.O.B. AB’s shipping point. In the absence of specific instructions, AB will select the carrier. Title to the
material shall pass to the Buyer upon delivery thereof by AB to the carrier or delivery service. Thereupon the Buyer shall be responsible therefore.
Products held for the Buyer, or stored for the Buyer, shall be at the risk and expense of the Buyer. Claims against AB for shortages must be made in
writing within ten days after the arrival of the shipment. AB is not required to notify the Buyer of the shipment.
5. Delivery: Shipping dates are approximate.
6. Packing: Unless otherwise specified, prices quoted herein include normal AB packaging. If special packaging is required by the Buyer, an
additional charge will be made.
7. Inspection: Unless the Buyer notifies AB in writing within ten days from the date of receipt of any products that says the products are rejected,
they will be deemed to have been accepted by the Buyer. In order for the notice of rejection to be effective, it must also specify the reasons why the
products are being rejected. Any rejected products must be returned to AB within thirty days of rejection or the rejection shall be void and of no
effect. Notwithstanding the preceding sentence, no returned goods will be accepted for credit unless written permission is first obtained from AB.
8. Limitation of Liability: AB shall not be liable for any loss, damage, cost of repairs, or incidental or consequential damages of any kind whether
or not based upon express or implied warranty, negligence, or strict liability arising out of or in connection with the design, manufacture, sale, use,
repair, or delivery of the product, or the engineering designs supplied to the Buyer. Without limiting the generality of the foregoing: if conditions
arise which prevent compliance with delivery schedules, AB shall not be liable for any damage or penalty for delay in delivery, or for failure to give
notice of delay, and such delay shall not constitute grounds for cancellation or price adjustment: in addition, AB shall not be liable for delay in
delivery without regard to the cause of the delay, and delivery dates shall be deemed extended for a period equal to such delay.
9. Fair Labor Standards Act: AB certifies that products furnished hereunder have been or will be produced in compliance with the Fair Labor
Standards Act, as amended and regulations and orders of the U.S. Department of Labor issued thereunder, AB agrees that this statement may be
considered as the written assurance contemplated by the October 26, 1949 amendment to said Act.
10. Modifications: Unless otherwise provided, AB reserves the right to modify the specifications of products ordered by the Buyer providing that
the modifications do not materially affect the performance.
11. Termination: In the event of the complete or partial termination or cancellation of this order for the convenience of the Government, settlement
shall be made by negotiations in accordance with the Termination Clause for Subcontractors set forth in Armed Services Procurement Regulation 8706. If the Buyer attempts to terminate or cancel this order, entirely or partially, other than for the convenience of the Government, it shall
constitute a material breach of contract unless consent to said termination is obtained by the Buyer from AB in writing. In any event, the prices of
all items delivered, and all items which have been furnished but not yet delivered, will be adjusted upward to the applicable price for the lesser
quantities thereby purchased. AB may terminate or cancel this order in whole or in part at any time prior to the completion of performance by
written notice to the Buyer without incurring any liability to the Buyer for breach of contract or otherwise.
12. Indemnity and Waiver of Subrogation: Buyer agrees to indemnify and hold AB harmless from any cost, liability or expense, including
attorney’s fees, which arises from or relates to any third party claim for personal injury (or death), property damages, or other loss allegedly based
upon defective design, material, or workmanship of any product sold or furnished by AB, or allegedly based on any breach by AB of any of its
contractual or other obligations. The Buyer represents that any liability insurance policies which the Buyer may have shall provide that subrogation
rights against supplies such as AB are waived.
13. Governing Law: The terms of this agreement and all rights and obligations under it shall be governed by the laws of the State of California.
14. Errors: AB reserves the right to correct clerical or stenographic errors or omissions.
15. Entire Contract: The provisions of the Agreement and any accompanying documents constitute all the terms and conditions agreed upon by the
parties and replace and supersede any inconsistent provisions on the face and the reverse side of the Purchase Order, Invoice, and Packing Slip. No
modifications of this Agreement shall be valid unless in writing and duly signed by a person authorized by AB. The provisions of this Agreement
shall not be modified by any usage of trade, or any course of prior dealing or acquiescence in the course of performance.
16. Disputes: Disputes between AB and the Buyer shall be resolved in accordance with the laws of the State of California without resort to said
state’s Conflict of Law rules. Pending final resolution of a dispute, AB shall proceed diligently with the performance of an order in accordance with
AB’s decision. In any legal action, arbitration, or other proceeding brought to enforce or interpret the terms of this agreement, the prevailing party
shall be entitled to reasonably attorneys' fees and any other costs incurred in that proceeding in addition to any other relief to which it is entitled.